This paper presents a comprehensive summary of data, analyses and findings from the investigations over the past twelve years about the relics of large Longyou rock caverns carved about 2 000 years ago at shallow dept...This paper presents a comprehensive summary of data, analyses and findings from the investigations over the past twelve years about the relics of large Longyou rock caverns carved about 2 000 years ago at shallow depths in argillaceous siltstone. The paper presents the typical features associated with the rock caverns. They include structures, large spans, portals, extreme shallow-buried depths, imprints, drainages, inclined ceiling, inclined sidewalls, slender rock pillars, rock staircases, site and strata selections, caving lighting, carving method, and underground construction surveying. They are used to reconstruct and highlight the design and construction methods adopted by the ancients. The paper further demonstrates that the relics of the complete large rock caverns are a consequence of coincidental combinations of ancient human effort and natural factors. The full occupation of water with weak acidity in the large rock caverns with the soft surrounding rocks of weak alkalinity is found to be the main factor ensuring and preserving the caverns to have been stable and integral over 2 000 years. However, the five unwatered complete rock cavern relics have been experiencing various deteriorations and small failures including cracks, seepage, small rock falls and delaminating ceiling rocks. Although these deteriorations have been repaired and stabilized effectively, the paper demonstrates that an entire roof collapse failure is highly possible in the near future to each of the five unwatered rock cavern relics. The findings presented in this paper are also invaluable both to the long-term protection and preservation of the large rock cavern relics of national and international interests and importance, and to extend and enrich our experience and knowledge on the long-term stability and integrity of man-made underground rock cavern engineering projects.展开更多
Discontinuous deformation analysis （DDA） provides a powerful numerical tool for the analysis of discontinuous media. This method has been widely applied to the 2D analysis of discontinuous deformation. However, it i...Discontinuous deformation analysis （DDA） provides a powerful numerical tool for the analysis of discontinuous media. This method has been widely applied to the 2D analysis of discontinuous deformation. However, it is hindered from analyzing 3D rock engineering problems mainly due to the lack of reliable 3D contact detection algorithms for polyhedra. Contact detection is a key in 3-D DDA analysis. The limitations and advantages of existing contact detection schemes are discussed in this paper, and a new approach, called the incision body （IB）, is proposed, taking into account the advantages of the existing methods. A computer code 3DIB, which uses the IB scheme as a 3D contact detection algorithm, was programmed with Visual C^＋＋. Static and dynamic stability analysis for three realistic engineering problems has been carried out. Furthermore, the focus is on studying the stability of a gravity dam on jointed rock foundation and dynamic stability of a fractured gravity dam subject to earthquake shaking. The simulation results show that the program 3DIB and incision body scheme are capable of detecting 3D block contacts correctly and hence simulating the open-close and slide process of jointed block masses. In addition, the code 3DIB could provide an effective tool for evaluating the safety of 3D dam structures, which is quite important for engineering problems.展开更多
Rigid Finite Element Method (RFEM) was proposed to simulate the mechanical behavior of discontinuous structures such as rock and soil structures. The authors' work on the theory and applications of RFEM is summari...Rigid Finite Element Method (RFEM) was proposed to simulate the mechanical behavior of discontinuous structures such as rock and soil structures. The authors' work on the theory and applications of RFEM is summarized in this paper. Based on the theory of RFEM, the Elastic Body-Seams Model (EBSM) is proposed to take the deformation and damage of rock masses into account.展开更多
Based on the analyses of data obtained from the underground powerhouse at Jinping I hydropower station, a comprehensive review of engineering rock mechanics practice in the underground powerhouse is first conducted. T...Based on the analyses of data obtained from the underground powerhouse at Jinping I hydropower station, a comprehensive review of engineering rock mechanics practice in the underground powerhouse is first conducted. The distribution of strata, lithology, and initial geo-stress, the excavation process and corresponding rock mass support measures, the deformation and failure characteristics of the surrounding rock mass, the stress characteristics of anchorage structures in the cavern complex, and numerical simulations of surrounding rock mass stability and anchor support performance are presented. The results indicate that the underground powerhouse of Jinping I hydropower station is characterized by high to extremely high geo-stresses during rock excavation. Excessive surrounding rock mass deformation and high stress of anchorage structures, surrounding rock mass unloading damage, and local cracking failure of surrounding rock masses, etc., are mainly caused by rock mass excavation. Deformations of surrounding rock masses and stresses in anchorage structures here are larger than those found elsewhere： 20% of extensometers in the main powerhouse record more than 50 mm with the maximum at around 250 mm observed in the downstream sidewall of the transformer hall. There are about 25% of the anchor bolts having recorded stresses of more than 200 MPa. Jinping I hydropower plant is the first to have an underground powerhouse construction conducted in host rocks under extremely high geo-stress conditions, with the ratio of rock mass strength to geo-stress of less than 2.0. The results can provide a reference to underground powerhouse construction in similar geological conditions.展开更多
基金Supported by the National Natural Science Foundation of China (40902088 and 40672190)the Key Project of Zhejiang Province Science and Technology (2007C23093)
文摘This paper presents a comprehensive summary of data, analyses and findings from the investigations over the past twelve years about the relics of large Longyou rock caverns carved about 2 000 years ago at shallow depths in argillaceous siltstone. The paper presents the typical features associated with the rock caverns. They include structures, large spans, portals, extreme shallow-buried depths, imprints, drainages, inclined ceiling, inclined sidewalls, slender rock pillars, rock staircases, site and strata selections, caving lighting, carving method, and underground construction surveying. They are used to reconstruct and highlight the design and construction methods adopted by the ancients. The paper further demonstrates that the relics of the complete large rock caverns are a consequence of coincidental combinations of ancient human effort and natural factors. The full occupation of water with weak acidity in the large rock caverns with the soft surrounding rocks of weak alkalinity is found to be the main factor ensuring and preserving the caverns to have been stable and integral over 2 000 years. However, the five unwatered complete rock cavern relics have been experiencing various deteriorations and small failures including cracks, seepage, small rock falls and delaminating ceiling rocks. Although these deteriorations have been repaired and stabilized effectively, the paper demonstrates that an entire roof collapse failure is highly possible in the near future to each of the five unwatered rock cavern relics. The findings presented in this paper are also invaluable both to the long-term protection and preservation of the large rock cavern relics of national and international interests and importance, and to extend and enrich our experience and knowledge on the long-term stability and integrity of man-made underground rock cavern engineering projects.
基金Key Program of National Natural Science Foundation of China Under Grant No.90510018 and Natural Science Foundation of Liaoning Province of China Under Grant No.20041077.
文摘Discontinuous deformation analysis （DDA） provides a powerful numerical tool for the analysis of discontinuous media. This method has been widely applied to the 2D analysis of discontinuous deformation. However, it is hindered from analyzing 3D rock engineering problems mainly due to the lack of reliable 3D contact detection algorithms for polyhedra. Contact detection is a key in 3-D DDA analysis. The limitations and advantages of existing contact detection schemes are discussed in this paper, and a new approach, called the incision body （IB）, is proposed, taking into account the advantages of the existing methods. A computer code 3DIB, which uses the IB scheme as a 3D contact detection algorithm, was programmed with Visual C^＋＋. Static and dynamic stability analysis for three realistic engineering problems has been carried out. Furthermore, the focus is on studying the stability of a gravity dam on jointed rock foundation and dynamic stability of a fractured gravity dam subject to earthquake shaking. The simulation results show that the program 3DIB and incision body scheme are capable of detecting 3D block contacts correctly and hence simulating the open-close and slide process of jointed block masses. In addition, the code 3DIB could provide an effective tool for evaluating the safety of 3D dam structures, which is quite important for engineering problems.
文摘Rigid Finite Element Method (RFEM) was proposed to simulate the mechanical behavior of discontinuous structures such as rock and soil structures. The authors' work on the theory and applications of RFEM is summarized in this paper. Based on the theory of RFEM, the Elastic Body-Seams Model (EBSM) is proposed to take the deformation and damage of rock masses into account.
基金the valuable support from Yalong River Hydropower Development Company,Ltd.HydroChina Chengdu Engineering Corporation,Ltdthe National Natural Science Foundation of China(Grant Nos.51179014,51579016,51379022,and 51539002)
文摘Based on the analyses of data obtained from the underground powerhouse at Jinping I hydropower station, a comprehensive review of engineering rock mechanics practice in the underground powerhouse is first conducted. The distribution of strata, lithology, and initial geo-stress, the excavation process and corresponding rock mass support measures, the deformation and failure characteristics of the surrounding rock mass, the stress characteristics of anchorage structures in the cavern complex, and numerical simulations of surrounding rock mass stability and anchor support performance are presented. The results indicate that the underground powerhouse of Jinping I hydropower station is characterized by high to extremely high geo-stresses during rock excavation. Excessive surrounding rock mass deformation and high stress of anchorage structures, surrounding rock mass unloading damage, and local cracking failure of surrounding rock masses, etc., are mainly caused by rock mass excavation. Deformations of surrounding rock masses and stresses in anchorage structures here are larger than those found elsewhere： 20% of extensometers in the main powerhouse record more than 50 mm with the maximum at around 250 mm observed in the downstream sidewall of the transformer hall. There are about 25% of the anchor bolts having recorded stresses of more than 200 MPa. Jinping I hydropower plant is the first to have an underground powerhouse construction conducted in host rocks under extremely high geo-stress conditions, with the ratio of rock mass strength to geo-stress of less than 2.0. The results can provide a reference to underground powerhouse construction in similar geological conditions.
