In this work,ultrasonic surface rolling process(USRP)was utilized to produce a gradient structured layer on 7 B50-T7751 aluminum alloy,and the mechanical properties and corrosion fatigue behavior of treated samples we...In this work,ultrasonic surface rolling process(USRP)was utilized to produce a gradient structured layer on 7 B50-T7751 aluminum alloy,and the mechanical properties and corrosion fatigue behavior of treated samples were studied.These results reveal that underwent USRP,a 425~m thick gradient structure and a 700~m deep compressive residual stress field are created,aluminum grain size become fine(~67 nm),and the corrosion rate of treated surface reduces by 60.08%owing to the combined effect of compressive residual stress and surface nanocrystallization.The corrosion fatigue strength is enhanced to 117%of that of 7 B50 Al alloys by means of USRP due to the introduced compressive residual stress,which is considered as the major favorable factor in suppressing the initiation and early propagation of corrosion fatigue cracks.Besides,the gradient structure is an important factor in providing a significant synergistic contribution to the improvement of corrosion fatigue performance.展开更多
Inspired by the nature,lotus leaf-derived gradient hierarchical porous C/MoS2 morphology genetic composites(GHPCM)were successfully fabricated through an in situ strategy.The biological microstructure of lotus leaf wa...Inspired by the nature,lotus leaf-derived gradient hierarchical porous C/MoS2 morphology genetic composites(GHPCM)were successfully fabricated through an in situ strategy.The biological microstructure of lotus leaf was well preserved after treatment.Different pores with gradient pore sizes ranging from 300 to 5μm were hierarchically distributed in the composites.In addition,the surface states of lotus leaf resulted in the Janus-like morphologies of MoS2.The GHPCM exhibit excellent electromagnetic wave absorption performance,with the minimum reflection loss of−50.1 dB at a thickness of 2.4 mm and the maximum effective bandwidth of 6.0 GHz at a thickness of 2.2 mm.The outstanding performance could be attributed to the synergy of conductive loss,polarization loss,and impedance matching.In particularly,we provided a brand-new dielectric sum-quotient model to analyze the electromagnetic performance of the non-magnetic material system.It suggests that the specific sum and quotient of permittivity are the key to keep reflection loss below−10 dB within a certain frequency range.Furthermore,based on the concept of material genetic engineering,the dielectric constant could be taken into account to seek for suitable materials with designable electromagnetic absorption performance.展开更多
The effects of gradient structure on the microstructure and properties of coated cemented carbides were researched with optical microscopy （OM）, scanning electron microscopy （SEM）, strength measurements, and cutti...The effects of gradient structure on the microstructure and properties of coated cemented carbides were researched with optical microscopy （OM）, scanning electron microscopy （SEM）, strength measurements, and cutting tests. It shows that vacuum sintering of WC-Ti（C, N）-TaC-Co cemented carbides results in the formation of a surface ductile zone. The ductile zone prevents crack propagation and leads to the increase of transverse rupture strength of the substrate. The impact resistance of coated gradient inserts was obviously improved on the basis of maintaining resistance to abrasion and the forming mechanism of the gradient structure was also analyzed.展开更多
Al80Ni6 Y8 Co4 Cu2 amorphous ribbons were isothermally annealed and a mixed structure consisting of α-Al particle with a size of less than 15nm and Al3Ni compound with a size of about 30nm was obtained. The crystall...Al80Ni6 Y8 Co4 Cu2 amorphous ribbons were isothermally annealed and a mixed structure consisting of α-Al particle with a size of less than 15nm and Al3Ni compound with a size of about 30nm was obtained. The crystallization kinetics of Al80Ni6 Y8 Co4 Cu2 amorphous alloy shows that the precipitation of α-Al particles is the growth process controlled by diffusion of the solute elements rejected from the growing crystals. By quenching at different cooling rates, a mixed structure consisting of nanoscale α-Al particles and the remaining glass matrix or structure consisting of nanoscale particle (Al phase or Al3Ni compound) with a size of about 100nm was formed. The addition of Co elements and Cu elements to Al-Ni-Y alloy systems increases the glass formation ability of the alloy and the thermal stability of the supercooled liquid region against crystallization, which results from significant difference of atomic size, strong bonding nature among constituent elements and the low diffisivity of the solute elements due to the concentration gradient in the growing front of crystals.展开更多
基金supported financially by the National Natural Science Foundation of China(No.51771155)the Equipment Pre-research Field Foundation(No.61409220202).
文摘In this work,ultrasonic surface rolling process(USRP)was utilized to produce a gradient structured layer on 7 B50-T7751 aluminum alloy,and the mechanical properties and corrosion fatigue behavior of treated samples were studied.These results reveal that underwent USRP,a 425~m thick gradient structure and a 700~m deep compressive residual stress field are created,aluminum grain size become fine(~67 nm),and the corrosion rate of treated surface reduces by 60.08%owing to the combined effect of compressive residual stress and surface nanocrystallization.The corrosion fatigue strength is enhanced to 117%of that of 7 B50 Al alloys by means of USRP due to the introduced compressive residual stress,which is considered as the major favorable factor in suppressing the initiation and early propagation of corrosion fatigue cracks.Besides,the gradient structure is an important factor in providing a significant synergistic contribution to the improvement of corrosion fatigue performance.
基金This project was supported by the National Natural Science Foundation of China(Nos.51971162,U1933112,51671146)the Program of Shanghai Technology Research Leader(18XD1423800)the Fundamental Research Funds for the Central Universities(22120180096).
文摘Inspired by the nature,lotus leaf-derived gradient hierarchical porous C/MoS2 morphology genetic composites(GHPCM)were successfully fabricated through an in situ strategy.The biological microstructure of lotus leaf was well preserved after treatment.Different pores with gradient pore sizes ranging from 300 to 5μm were hierarchically distributed in the composites.In addition,the surface states of lotus leaf resulted in the Janus-like morphologies of MoS2.The GHPCM exhibit excellent electromagnetic wave absorption performance,with the minimum reflection loss of−50.1 dB at a thickness of 2.4 mm and the maximum effective bandwidth of 6.0 GHz at a thickness of 2.2 mm.The outstanding performance could be attributed to the synergy of conductive loss,polarization loss,and impedance matching.In particularly,we provided a brand-new dielectric sum-quotient model to analyze the electromagnetic performance of the non-magnetic material system.It suggests that the specific sum and quotient of permittivity are the key to keep reflection loss below−10 dB within a certain frequency range.Furthermore,based on the concept of material genetic engineering,the dielectric constant could be taken into account to seek for suitable materials with designable electromagnetic absorption performance.
文摘The effects of gradient structure on the microstructure and properties of coated cemented carbides were researched with optical microscopy （OM）, scanning electron microscopy （SEM）, strength measurements, and cutting tests. It shows that vacuum sintering of WC-Ti（C, N）-TaC-Co cemented carbides results in the formation of a surface ductile zone. The ductile zone prevents crack propagation and leads to the increase of transverse rupture strength of the substrate. The impact resistance of coated gradient inserts was obviously improved on the basis of maintaining resistance to abrasion and the forming mechanism of the gradient structure was also analyzed.
文摘Al80Ni6 Y8 Co4 Cu2 amorphous ribbons were isothermally annealed and a mixed structure consisting of α-Al particle with a size of less than 15nm and Al3Ni compound with a size of about 30nm was obtained. The crystallization kinetics of Al80Ni6 Y8 Co4 Cu2 amorphous alloy shows that the precipitation of α-Al particles is the growth process controlled by diffusion of the solute elements rejected from the growing crystals. By quenching at different cooling rates, a mixed structure consisting of nanoscale α-Al particles and the remaining glass matrix or structure consisting of nanoscale particle (Al phase or Al3Ni compound) with a size of about 100nm was formed. The addition of Co elements and Cu elements to Al-Ni-Y alloy systems increases the glass formation ability of the alloy and the thermal stability of the supercooled liquid region against crystallization, which results from significant difference of atomic size, strong bonding nature among constituent elements and the low diffisivity of the solute elements due to the concentration gradient in the growing front of crystals.
