In 2011,the Chinese Academy of Sciences launched an engineering project to develop an acceleratordriven subcritical system(ADS)for nuclear waste transmutation.The China Lead-based Reactor(CLEAR),proposed by the Instit...In 2011,the Chinese Academy of Sciences launched an engineering project to develop an acceleratordriven subcritical system(ADS)for nuclear waste transmutation.The China Lead-based Reactor(CLEAR),proposed by the Institute of Nuclear Energy Safety Technology,was selected as the reference reactor for ADS development,as well as for the technology development of the Generation IV lead-cooled fast reactor.The conceptual design of CLEAR-I with 10 MW thermal power has been completed.KYLIN series lead-bismuth eutectic experimental loops have been constructed to investigate the technologies of the coolant,key components,structural materials,fuel assembly,operation,and control.In order to validate and test the key components and integrated operating technology of the lead-based reactor,the lead alloy-cooled non-nuclear reactor CLEAR-S,the lead-based zero-power nuclear reactor CLEAR-0,and the lead-based virtual reactor CLEAR-V are under realization.展开更多
The effects of rare earth （RE） on the microstructures and properties of high carbon high speed steel （HCHSS） were investigated. The results show that when suitable RE is added to the HCHSS, the effect of RE on the...The effects of rare earth （RE） on the microstructures and properties of high carbon high speed steel （HCHSS） were investigated. The results show that when suitable RE is added to the HCHSS, the effect of RE on the austenite and eutectic carbides is obvious. The austenite grain and coarse eutectic structure are refined, and flake carbides in the eutectic structures become short and fine. After heat treatment, most of the eutectic carbides are spheroidized and distributed in a uniform manner. The hardness and red hardness of modified HCHSS are slightly increased; impact toughness is greatly increased by 37.81% and reaches 10.17 J/cm^2. The mechanism by which RE improves the structures and properties of HCHSS is also analyzed.展开更多
Biomass is renewable, abundant, cheap, biocompatible, and biodegradable materials and has been used to produce chemicals, materials,energy, and fuels. However, most of the biomass, especially most of the biomass polym...Biomass is renewable, abundant, cheap, biocompatible, and biodegradable materials and has been used to produce chemicals, materials,energy, and fuels. However, most of the biomass, especially most of the biomass polymers are not soluble in common solvents, which hinders their pretreatment and conversion. Deep eutectic solvents(DESs) are environmental-friendly, cheap, and highly tunable, with high solubility,which renders them potential applications in biomass pretreatment and conversion. They could be used as solvents or catalysts and so on. This paper intends to review the application of DESs for the pretreatment of biomass and conversion of biomass to value-added products. We focus on the following topics related to biomass and DESs:(1) DESs for the pretreatment of biomass;(2) DESs for the dissolution and separation of biomass or extraction of chemicals from biomass;(3) DESs for biomass conversion;(4) Drawbacks, and recyclability of DESs for pretreatment and conversion of biomass.展开更多
This review divides the acidic deep eutectic solvents(ADES) into Br?nsted and Lewis DES according to their diversity of acidic character.The hydrogen bond donors and halide salts for formulating an ADES are classified...This review divides the acidic deep eutectic solvents(ADES) into Br?nsted and Lewis DES according to their diversity of acidic character.The hydrogen bond donors and halide salts for formulating an ADES are classified, the synthesis methods are described, and the physicochemical properties including freezing point, acidity, density, viscosity and conductivity are presented. Furthermore, the applications of Br?nsted acidic deep eutectic solvents(BADES) and Lewis acidic deep eutectic solvents(LADES) are overviewed, respectively, covering the fields in dissolution, extraction, organic reaction and metal electrodeposition. It is expected that the ADES has great potential to replace the pollutional mineral acid, expensive and unstable solid acid, and costly ionic liquid in many acid-employed chemical processes, thus meeting the demands of green chemistry.展开更多
The effects of Sm additions （0, 0.5 wt.%, 1.0 wt.%and 1.5 wt.%） on the eutectic Si and β-Al5FeSi phases of ADC12 as-cast alloys were studied by optical microscopy （OM）, scanning electron microscopy （SEM） and di...The effects of Sm additions （0, 0.5 wt.%, 1.0 wt.%and 1.5 wt.%） on the eutectic Si and β-Al5FeSi phases of ADC12 as-cast alloys were studied by optical microscopy （OM）, scanning electron microscopy （SEM） and differential thermal analysis （DTA）. The experimental results showed that Sm was an effective modifying agent for the eutectic Si of ADC12 alloy, when 1.0 wt.%-1.5 wt.%Sm was added to the alloy, the coarse acicular eutectic Si was modified into fine particle or short rod structure. Moreover, the appropriate addition of Sm （about 1.0 wt.%） had marked effects on shortening the length of needle-likeβ-Al5FeSi phase. Whereas, Sm was less effective on modifying the needle-likeβ-iron to the Chinese script or sphericalα-iron phase. The modification mecha-nism was also discussed.展开更多
The study systematically investigated the effects of master alloy addition containing rare earth elements La and Yb on the microstructures characteristic and tensile properties of A1Sil0Cu3 alloy. It was studied by me...The study systematically investigated the effects of master alloy addition containing rare earth elements La and Yb on the microstructures characteristic and tensile properties of A1Sil0Cu3 alloy. It was studied by means of optical microscopy, X-ray diffraction, scanning electron microscopy, energy diffraction spectnam and differential thermal analyzer. The results showed that the ad-dition of （La＋Yb） obviously reduced the sizes of the primary a-Al phase and eutectic Si particles as well as 13-A15FeSi phase and im- proved the morphology of the primary a-A1 phase and eutectic Si particles. The optimum addition of（La＋Yb） addition was 0.6 wt.%. Comparing the 0.6 wt.% （La＋Yb） modified A1Sil0Cu3 alloy with the unmodified alloy, it was found that the mean diameter, mean area and SADS of primary a-A1 phase were decreased by 50.80%, 75.74% and 50.83% respectively; the aspect ratio, size （length） and mean area of eutectic Si particles were decreased by 66.30%, 81.78% and 78.99%, respectively, and the average size of the β-AlsFeSi phase was 16.4 pro. In addition, the addition of （La＋Yb） greatly improved the tensile properties ofA1Si 10Cu3 alloy, especially in the ultimate tensile strength and elongation as a result of the significant improvement in microstructure.展开更多
The influence of rare earth （RE） elements on the solidification process and eutectic transformation and mechanical properties of the high-V type cast, high-speed steel roll was studied. Test materials with different...The influence of rare earth （RE） elements on the solidification process and eutectic transformation and mechanical properties of the high-V type cast, high-speed steel roll was studied. Test materials with different RE additions were prepared on a horizontal centrifugal casting machine. The solidification process, eutectic structure transformation, carbide morphology, and the elements present, were all investigated by means of differential scanning calorimetry （DSC） and scanning electron microscopy energy dispersive spectrometry （SEM-EDS）. The energy produced by crack initiation and crack extension was analyzed using a digital impact test machine. It was found that rare earth elements increased the tensile strength of the steel by inducing crystallization of earlier eutectic γ-Fe during the solidification process, which in turn increased the solidification temperature and thinned the dendritic grains. Rare earth elements with large atomic radius changed the lattice parameters of the MC carbide by forming rare earth carbides. This had the effect of dispersing longpole M C carbides to provide carbide grains, thereby, reducing the formation of the gross carbide and making more V available, to increase the secondary hardening process and improve the hardness level. The presence of rare earth elements in the steel raised the impact toughness by changing the mechanism of MC carbide formation, thereby increasing the crack initiation energy.展开更多
文摘In 2011,the Chinese Academy of Sciences launched an engineering project to develop an acceleratordriven subcritical system(ADS)for nuclear waste transmutation.The China Lead-based Reactor(CLEAR),proposed by the Institute of Nuclear Energy Safety Technology,was selected as the reference reactor for ADS development,as well as for the technology development of the Generation IV lead-cooled fast reactor.The conceptual design of CLEAR-I with 10 MW thermal power has been completed.KYLIN series lead-bismuth eutectic experimental loops have been constructed to investigate the technologies of the coolant,key components,structural materials,fuel assembly,operation,and control.In order to validate and test the key components and integrated operating technology of the lead-based reactor,the lead alloy-cooled non-nuclear reactor CLEAR-S,the lead-based zero-power nuclear reactor CLEAR-0,and the lead-based virtual reactor CLEAR-V are under realization.
文摘The effects of rare earth （RE） on the microstructures and properties of high carbon high speed steel （HCHSS） were investigated. The results show that when suitable RE is added to the HCHSS, the effect of RE on the austenite and eutectic carbides is obvious. The austenite grain and coarse eutectic structure are refined, and flake carbides in the eutectic structures become short and fine. After heat treatment, most of the eutectic carbides are spheroidized and distributed in a uniform manner. The hardness and red hardness of modified HCHSS are slightly increased; impact toughness is greatly increased by 37.81% and reaches 10.17 J/cm^2. The mechanism by which RE improves the structures and properties of HCHSS is also analyzed.
基金supported by the National Natural Science Foundation of China(21773307)
文摘Biomass is renewable, abundant, cheap, biocompatible, and biodegradable materials and has been used to produce chemicals, materials,energy, and fuels. However, most of the biomass, especially most of the biomass polymers are not soluble in common solvents, which hinders their pretreatment and conversion. Deep eutectic solvents(DESs) are environmental-friendly, cheap, and highly tunable, with high solubility,which renders them potential applications in biomass pretreatment and conversion. They could be used as solvents or catalysts and so on. This paper intends to review the application of DESs for the pretreatment of biomass and conversion of biomass to value-added products. We focus on the following topics related to biomass and DESs:(1) DESs for the pretreatment of biomass;(2) DESs for the dissolution and separation of biomass or extraction of chemicals from biomass;(3) DESs for biomass conversion;(4) Drawbacks, and recyclability of DESs for pretreatment and conversion of biomass.
基金The financial support from National Natural Science Foundation of China(21776074,21576081,and 2181101120)is greatly acknowledged
文摘This review divides the acidic deep eutectic solvents(ADES) into Br?nsted and Lewis DES according to their diversity of acidic character.The hydrogen bond donors and halide salts for formulating an ADES are classified, the synthesis methods are described, and the physicochemical properties including freezing point, acidity, density, viscosity and conductivity are presented. Furthermore, the applications of Br?nsted acidic deep eutectic solvents(BADES) and Lewis acidic deep eutectic solvents(LADES) are overviewed, respectively, covering the fields in dissolution, extraction, organic reaction and metal electrodeposition. It is expected that the ADES has great potential to replace the pollutional mineral acid, expensive and unstable solid acid, and costly ionic liquid in many acid-employed chemical processes, thus meeting the demands of green chemistry.
基金Project supported by National Natural Science Foundation of China(51165032,51364035)Department of Education of JiangxiProvince(GJJ13203)+2 种基金Innovative Group of Science and Technology of College of Jiangxi Province(00008713)Jiangxi Province Education Commission Foundation(GJJ13203)University-industry Cooperation Plan of Non-party Experts and Doctor of Nanchang (2012-CYH-DW-XCL-002) for financial support
文摘The effects of Sm additions （0, 0.5 wt.%, 1.0 wt.%and 1.5 wt.%） on the eutectic Si and β-Al5FeSi phases of ADC12 as-cast alloys were studied by optical microscopy （OM）, scanning electron microscopy （SEM） and differential thermal analysis （DTA）. The experimental results showed that Sm was an effective modifying agent for the eutectic Si of ADC12 alloy, when 1.0 wt.%-1.5 wt.%Sm was added to the alloy, the coarse acicular eutectic Si was modified into fine particle or short rod structure. Moreover, the appropriate addition of Sm （about 1.0 wt.%） had marked effects on shortening the length of needle-likeβ-Al5FeSi phase. Whereas, Sm was less effective on modifying the needle-likeβ-iron to the Chinese script or sphericalα-iron phase. The modification mecha-nism was also discussed.
基金supported by the National Natural Science Foundation of China(51364035,51165032)Ministry of Education tied up with the Special Research Fund for the Doctoral Program for Higher School(20133601110001)Loading Program of Science and Technology of College of Jiangxi Province(KJLD14003)
文摘The study systematically investigated the effects of master alloy addition containing rare earth elements La and Yb on the microstructures characteristic and tensile properties of A1Sil0Cu3 alloy. It was studied by means of optical microscopy, X-ray diffraction, scanning electron microscopy, energy diffraction spectnam and differential thermal analyzer. The results showed that the ad-dition of （La＋Yb） obviously reduced the sizes of the primary a-Al phase and eutectic Si particles as well as 13-A15FeSi phase and im- proved the morphology of the primary a-A1 phase and eutectic Si particles. The optimum addition of（La＋Yb） addition was 0.6 wt.%. Comparing the 0.6 wt.% （La＋Yb） modified A1Sil0Cu3 alloy with the unmodified alloy, it was found that the mean diameter, mean area and SADS of primary a-A1 phase were decreased by 50.80%, 75.74% and 50.83% respectively; the aspect ratio, size （length） and mean area of eutectic Si particles were decreased by 66.30%, 81.78% and 78.99%, respectively, and the average size of the β-AlsFeSi phase was 16.4 pro. In addition, the addition of （La＋Yb） greatly improved the tensile properties ofA1Si 10Cu3 alloy, especially in the ultimate tensile strength and elongation as a result of the significant improvement in microstructure.
基金Project supported by"863"Project (2006AA03Z532)the National Natural Science Foundation of China (NSFC 50341050)
文摘The influence of rare earth （RE） elements on the solidification process and eutectic transformation and mechanical properties of the high-V type cast, high-speed steel roll was studied. Test materials with different RE additions were prepared on a horizontal centrifugal casting machine. The solidification process, eutectic structure transformation, carbide morphology, and the elements present, were all investigated by means of differential scanning calorimetry （DSC） and scanning electron microscopy energy dispersive spectrometry （SEM-EDS）. The energy produced by crack initiation and crack extension was analyzed using a digital impact test machine. It was found that rare earth elements increased the tensile strength of the steel by inducing crystallization of earlier eutectic γ-Fe during the solidification process, which in turn increased the solidification temperature and thinned the dendritic grains. Rare earth elements with large atomic radius changed the lattice parameters of the MC carbide by forming rare earth carbides. This had the effect of dispersing longpole M C carbides to provide carbide grains, thereby, reducing the formation of the gross carbide and making more V available, to increase the secondary hardening process and improve the hardness level. The presence of rare earth elements in the steel raised the impact toughness by changing the mechanism of MC carbide formation, thereby increasing the crack initiation energy.
