Cyclic symmetrical tension-compression fatigue tests in an axial plastic strain range of 2.0×10-4 to 1.5×10-3 were performed on three copper tetracrystal specimens containing two grain boundary triple lines ...Cyclic symmetrical tension-compression fatigue tests in an axial plastic strain range of 2.0×10-4 to 1.5×10-3 were performed on three copper tetracrystal specimens containing two grain boundary triple lines as well as one copper tricrystal specimen employing a multiple step method. Experimental results show that the strengthening effect of triple junction (TJ) on axial saturation stress increased with increasing plastic strain amplitude. The strengthening effects owe much to the strain incompatibilities at TJ. The cyclic stress-strain (CSS) curves of tetracrystals are higher than that of tricrystal. At low strain amplitude, deformation at TJ is smaller than that near grain boundary (GB), which results in that the width of TJ effect zone is smaller than that near GB. Whether GB split or not is associated with the angle between GB and loading axis, activation of slip systems beside GB and the accommodation and annihilation of residual dislocations on GB planes.展开更多
The effects of Ce addition(310 ppm and 1500 ppm)on the microstructure,texture and properties of ultrahigh-purity copper(99.99999%)were systematically studied using scanning electron microscopy(SEM),transmission electr...The effects of Ce addition(310 ppm and 1500 ppm)on the microstructure,texture and properties of ultrahigh-purity copper(99.99999%)were systematically studied using scanning electron microscopy(SEM),transmission electron microscopy(TEM)and electron backscattered diffraction(EBSD)analyses,combined with the microhardness and conductivity tests.Regarding the microstructure of the as-cast and as-extruded samples,the addition of Ce refines the grain size of the ultrahigh-purity copper and the refinement effect of 310Ce alloy is greater than that of 1500Ce alloy.This is due to the stronger compone nt supercooling and the accele rated recrystallization caused by lower Ce co ntent.In addition,Ce can react with Cu to form the Cu-Ce eutectic phases,which are deformable during the hot deformation.Furthermore,the added Ce can weaken the texture,showing a variation of brass recrystallization(BR),rotated cube,copper and S texture components,which depends on the recrystallization,the particle stimulated nucleation(PSN)as well as the stacking fault energy(SFE).Most remarkably,the introduction of Ce enhances the hardness of the ultrahigh-purity copper without obviously reducing its conductivity.The major{111}orientations and the stress distributions are responsible for such a superior conductivity of the Ce-containing alloys.展开更多
Cu−0.5wt.%Cr alloy with high strength and high conductivity was processed by cryorolling(CR)and room temperature rolling(RTR),respectively.The microstructure,mechanical property and electrical conductivity of Cu−0.5Cr...Cu−0.5wt.%Cr alloy with high strength and high conductivity was processed by cryorolling(CR)and room temperature rolling(RTR),respectively.The microstructure,mechanical property and electrical conductivity of Cu−0.5Cr alloy after CR/RTR and aging treatment were investigated.The results indicate that obvious dislocation entanglement can be observed in matrix of CR alloy.The Cr particles in the alloy after CR and aging treatment possess finer particle size and exhibit dispersive distribution.The peak hardness of CR alloy is HV 167.4,significantly higher than that of RTR alloy.The optimum mechanical property of CR alloy is obtained after aging at 450℃ for 120 min.The conductivity of CR Cu−0.5Cr alloy reaches 92.5%IACS after aging at 450℃ for 120 min,which is slightly higher than that of RTR alloy.展开更多
文摘Cyclic symmetrical tension-compression fatigue tests in an axial plastic strain range of 2.0×10-4 to 1.5×10-3 were performed on three copper tetracrystal specimens containing two grain boundary triple lines as well as one copper tricrystal specimen employing a multiple step method. Experimental results show that the strengthening effect of triple junction (TJ) on axial saturation stress increased with increasing plastic strain amplitude. The strengthening effects owe much to the strain incompatibilities at TJ. The cyclic stress-strain (CSS) curves of tetracrystals are higher than that of tricrystal. At low strain amplitude, deformation at TJ is smaller than that near grain boundary (GB), which results in that the width of TJ effect zone is smaller than that near GB. Whether GB split or not is associated with the angle between GB and loading axis, activation of slip systems beside GB and the accommodation and annihilation of residual dislocations on GB planes.
基金Project supported by the Henan Province Science and Technology Tackling Key Problems Project(222102230001)the Henan Province Young Talent Lifting Engineering Project(2021HYTP018)+1 种基金the Central Plain Scholar Workstation Project(224400510025)the National Natural Science Foundation of China(52071133,51904090 and 52071284)。
文摘The effects of Ce addition(310 ppm and 1500 ppm)on the microstructure,texture and properties of ultrahigh-purity copper(99.99999%)were systematically studied using scanning electron microscopy(SEM),transmission electron microscopy(TEM)and electron backscattered diffraction(EBSD)analyses,combined with the microhardness and conductivity tests.Regarding the microstructure of the as-cast and as-extruded samples,the addition of Ce refines the grain size of the ultrahigh-purity copper and the refinement effect of 310Ce alloy is greater than that of 1500Ce alloy.This is due to the stronger compone nt supercooling and the accele rated recrystallization caused by lower Ce co ntent.In addition,Ce can react with Cu to form the Cu-Ce eutectic phases,which are deformable during the hot deformation.Furthermore,the added Ce can weaken the texture,showing a variation of brass recrystallization(BR),rotated cube,copper and S texture components,which depends on the recrystallization,the particle stimulated nucleation(PSN)as well as the stacking fault energy(SFE).Most remarkably,the introduction of Ce enhances the hardness of the ultrahigh-purity copper without obviously reducing its conductivity.The major{111}orientations and the stress distributions are responsible for such a superior conductivity of the Ce-containing alloys.
基金Project(2016YFB0101206)supported by the National Key Research and Development Program of ChinaProject(3132019328)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Cu−0.5wt.%Cr alloy with high strength and high conductivity was processed by cryorolling(CR)and room temperature rolling(RTR),respectively.The microstructure,mechanical property and electrical conductivity of Cu−0.5Cr alloy after CR/RTR and aging treatment were investigated.The results indicate that obvious dislocation entanglement can be observed in matrix of CR alloy.The Cr particles in the alloy after CR and aging treatment possess finer particle size and exhibit dispersive distribution.The peak hardness of CR alloy is HV 167.4,significantly higher than that of RTR alloy.The optimum mechanical property of CR alloy is obtained after aging at 450℃ for 120 min.The conductivity of CR Cu−0.5Cr alloy reaches 92.5%IACS after aging at 450℃ for 120 min,which is slightly higher than that of RTR alloy.
