Virtual synchronous generators(VSGs)are widely introduced to the renewable power generation,the variablespeed pumped storage units,and so on,as a promising gridforming solution.It is noted that VSGs can provide virtua...Virtual synchronous generators(VSGs)are widely introduced to the renewable power generation,the variablespeed pumped storage units,and so on,as a promising gridforming solution.It is noted that VSGs can provide virtual inertia for frequency support,but the larger inertia would worsen the synchronization stability,referring to keeping synchronization with the grid during voltage dips.Thus,this paper presents a transient damping method of VSGs for enhancing the synchronization stability during voltage dips.It is revealed that the loss of synchronization(LOS)of VSGs always accompanies with the positive frequency deviation and the damping is the key factor to remove LOS when the equilibrium point exists.In order to enhance synchronization stability during voltage dips,the transient damping is proposed,which is generated by the frequency deviation in active power loop.Additionally,the proposed method can realize seamless switching between normal state and grid fault.Moreover,detailed control design for transient damping gain is given to ensure the synchronization stability under different inertia requirements during voltage dips.Finally,the experimental results are presented to validate the analysis and the effectiveness of the improved transient damping method.展开更多
Nickel-rich layered oxide LiNi_(x)Co_(y)MnzO_(2)(NCM,x+y+z=1)is the most promising cathode material for high-energy lithium-ion batteries.However,conventional synthesis methods are limited by the slow heating rate,slu...Nickel-rich layered oxide LiNi_(x)Co_(y)MnzO_(2)(NCM,x+y+z=1)is the most promising cathode material for high-energy lithium-ion batteries.However,conventional synthesis methods are limited by the slow heating rate,sluggish reaction dynamics,high energy consumption,and long reaction time.To overcome these chal-lenges,we first employed a high-temperature shock(HTS)strategy for fast synthesis of the NCM,and the approaching ultimate reaction rate of solid phase transition is deeply investigated for the first time.In the HTS process,ultrafast average reaction rate of phase transition from Ni_(0.6)Co_(0.2)Mn_(0.2)(OH)_(2) to Li-containing oxides is 66.7(%s^(-1)),that is,taking only 1.5 s.An ultrahigh heating rate leads to fast reaction kinetics,which induces the rapid phase transition of NCM cathodes.The HTS-synthesized nickel-rich layered oxides perform good cycling performances(94%for NCM523,94%for NCM622,and 80%for NCM811 after 200 cycles at 4.3 V).These findings might also assist to pave the way for preparing effectively Ni-rich layered oxides for lithium-ion batteries.展开更多
Fabricating high integration density,high resolution,and intrinsically stretchable patterns by patterned technologies remain challenging.Template printing enabled high-precision patterned fabrication at a facile opera...Fabricating high integration density,high resolution,and intrinsically stretchable patterns by patterned technologies remain challenging.Template printing enabled high-precision patterned fabrication at a facile operation.However,the pattern spacing constraint is the major limitation to high integration density.In this study,we develop an elastomer-assisted strategy to improve the template printing process,which involves patterning on the prestrain elastic substrate.This strategy overcomes the spacing limitation and enables the realization of a centimeter-scale pattern with submicron precision.Particularly,the integration density of fabricated intrinsically stretchable patterns can reach 1932 lines on a substrate of 0.5 cm2;the assembly lines with a feature size of 880 nm and an interval of 955 nm.Furthermore,we demonstrate a facile approach for constructing silver nanoparticle/liquid metal alloy composite conductive patterns.The as-prepared flexible electrodes can withstand up to 150%strain and a 2-mm bend radius.This method provides new insights into template printing technology.Additionally,it opens a route for the simultaneous construction of functional patterned arrays with large scale,high integration density,and intrinsic stretchability,which will be useful for the integrated fabrication of various flexible electronic devices.展开更多
文摘Virtual synchronous generators(VSGs)are widely introduced to the renewable power generation,the variablespeed pumped storage units,and so on,as a promising gridforming solution.It is noted that VSGs can provide virtual inertia for frequency support,but the larger inertia would worsen the synchronization stability,referring to keeping synchronization with the grid during voltage dips.Thus,this paper presents a transient damping method of VSGs for enhancing the synchronization stability during voltage dips.It is revealed that the loss of synchronization(LOS)of VSGs always accompanies with the positive frequency deviation and the damping is the key factor to remove LOS when the equilibrium point exists.In order to enhance synchronization stability during voltage dips,the transient damping is proposed,which is generated by the frequency deviation in active power loop.Additionally,the proposed method can realize seamless switching between normal state and grid fault.Moreover,detailed control design for transient damping gain is given to ensure the synchronization stability under different inertia requirements during voltage dips.Finally,the experimental results are presented to validate the analysis and the effectiveness of the improved transient damping method.
基金the financial support from the National Natural Science Foundation of China(Grant Nos.92372107 and 52171219).
文摘Nickel-rich layered oxide LiNi_(x)Co_(y)MnzO_(2)(NCM,x+y+z=1)is the most promising cathode material for high-energy lithium-ion batteries.However,conventional synthesis methods are limited by the slow heating rate,sluggish reaction dynamics,high energy consumption,and long reaction time.To overcome these chal-lenges,we first employed a high-temperature shock(HTS)strategy for fast synthesis of the NCM,and the approaching ultimate reaction rate of solid phase transition is deeply investigated for the first time.In the HTS process,ultrafast average reaction rate of phase transition from Ni_(0.6)Co_(0.2)Mn_(0.2)(OH)_(2) to Li-containing oxides is 66.7(%s^(-1)),that is,taking only 1.5 s.An ultrahigh heating rate leads to fast reaction kinetics,which induces the rapid phase transition of NCM cathodes.The HTS-synthesized nickel-rich layered oxides perform good cycling performances(94%for NCM523,94%for NCM622,and 80%for NCM811 after 200 cycles at 4.3 V).These findings might also assist to pave the way for preparing effectively Ni-rich layered oxides for lithium-ion batteries.
基金Beijing National Laboratory for Molecular Sciences,Grant/Award Numbers:BNLMSCXXM‐202005,2019BMS20003National Natural Science Foundation of China,Grant/Award Number:2018YFA0703200+3 种基金K.C.Wong Education Foundation,and China Postdoctoral Science Foundation,Grant/Award Number:2020M670466External Cooperation Program of Chinese Academy of Sciences,Grant/Award Number:GJHZ201948CAS‐VPST Silk Road Science Fund 2022,Grant/Award Number:121111KYSB20210006National Key R&D Program of China,Grant/Award Numbers:52003276,22175185,52003273,51803217,51773206,91963212,51961145102,22002171。
文摘Fabricating high integration density,high resolution,and intrinsically stretchable patterns by patterned technologies remain challenging.Template printing enabled high-precision patterned fabrication at a facile operation.However,the pattern spacing constraint is the major limitation to high integration density.In this study,we develop an elastomer-assisted strategy to improve the template printing process,which involves patterning on the prestrain elastic substrate.This strategy overcomes the spacing limitation and enables the realization of a centimeter-scale pattern with submicron precision.Particularly,the integration density of fabricated intrinsically stretchable patterns can reach 1932 lines on a substrate of 0.5 cm2;the assembly lines with a feature size of 880 nm and an interval of 955 nm.Furthermore,we demonstrate a facile approach for constructing silver nanoparticle/liquid metal alloy composite conductive patterns.The as-prepared flexible electrodes can withstand up to 150%strain and a 2-mm bend radius.This method provides new insights into template printing technology.Additionally,it opens a route for the simultaneous construction of functional patterned arrays with large scale,high integration density,and intrinsic stretchability,which will be useful for the integrated fabrication of various flexible electronic devices.
