The demand for the swirl nozzle with enhanced temperature resistance and lightweight properties is in-creasing as the thrust-to-weight ratio of aero-engines rises.The Al_(2)O_(3) ceramic swirl nozzle can maintain high...The demand for the swirl nozzle with enhanced temperature resistance and lightweight properties is in-creasing as the thrust-to-weight ratio of aero-engines rises.The Al_(2)O_(3) ceramic swirl nozzle can maintain high strength in a hostile environment of high temperature and severe corrosion,while also meeting the requirements of aircraft to enhance efficiency and decrease weight.However,Al_(2)O_(3) ceramics are limited in their application for aerospace components due to their poor thermal shock resistance(TSR)stemming from their inherent brittleness.This work reported an innovative design and fabrication strategy based on photopolymerization 3D printing technology to realize the three-dimensional shell structure through element interdiffusion and nanoscale stacking of the reinforced phase.With this strategy,a novel type of the new dual-structure Al_(2)O_(3) ceramic composed of MgAl_(2)O_(4) shell structure and matrix could be con-structed in situ.The nano-sized MgAl_(2)O_(4) caused a crack passivation effect after the thermal shock,which could improve the strength and TSR of 3D-printed Al_(2)O_(3) ceramic.In addition,the effects of MgO content and sintering temperature on sintering behavior,flexural strength,porosity,and TSR of Al_(2)O_(3) ceram-ics manufactured by digital light processing(DLP)processing were systematically studied.The optimum overall performance of Al_(2)O_(3) ceramics was obtained at the sintering temperature of 1550℃and the MgO content of 1.0 wt.%,with a maximum flexural strength of 111.929 MPa and a critical temperature difference of 374.24℃for TSR.Based on the above research,an aero-engine swirl nozzle with high ther-mal shock resistance has been successfully prepared by ceramic 3D printing technology,which enhances high-temperature resistance and promotes lightweight design in aero-engine.展开更多
Intramedullary tumors are a class of central nervous system tumors with an incidence of 2 to 4%.As they are located very deep and frequently cause postoperative neurological complications,surgical resection is difficu...Intramedullary tumors are a class of central nervous system tumors with an incidence of 2 to 4%.As they are located very deep and frequently cause postoperative neurological complications,surgical resection is difficult.In recent years,many surgeons have performed electrophysiological monitoring to effectively reduce the occurrence of post-operative neurological complications.Modern electrophysiological monitoring technology has advanced considerably,leading to the development of many monitoring methods,such as SSEPs,MEPs,DCM,and EMG,to monitor intramedullary tumors.However,electrophysiological monitoring in tumor resection is still being studied.In this article,we discussed the different monitoring methods and their role in monitoring intramedullary tumors by reviewing previous studies.Intratumorally tumors need to be monitored for a summary of the condition of the patient.Only by using various monitoring methods flexibly and through clear communication between surgeons and neurophysiological experts can good decisions be made during surgery and positive surgical results be achieved.展开更多
Regulating macrophage phenotypes to reconcile the conflict between bacterial suppression and tissue regeneration is ideal for treating infectious skin wounds. Here, an injectable immunoregulatory hydrogel (SrmE20) tha...Regulating macrophage phenotypes to reconcile the conflict between bacterial suppression and tissue regeneration is ideal for treating infectious skin wounds. Here, an injectable immunoregulatory hydrogel (SrmE20) that sequentially drives macrophage phenotypic polarization (M0 to M1, then to M2) was constructed by integrating anti-inflammatory components and proinflammatory solvents. In vitro experiments demonstrated that the proinflammatory solvent ethanol stabilized the hydrogel structure, maintained the phenolic hydroxyl group activity, and achieved macrophages' proinflammatory transition (M0 to M1) to enhance antibacterial effects. With ethanol depletion, the hydrogel's cations and phenolic hydroxyl groups synergistically regulated macrophages' anti-inflammatory transition (M1 to M2) to initiate regeneration. In the anti-contraction full-thickness wound model with infection, this hydrogel effectively eliminated bacteria and even achieved anti-inflammatory M2 macrophage accumulation at three days post-surgery, accelerated angiogenesis and collagen deposition. By sequentially driving macrophage phenotypic polarization, this injectable immunoregulatory hydrogel will bring new guidance for the care and treatment of infected wounds.展开更多
Dispersion-strengthened copper alloys can achieve ultra-high strength,but usually at the expense of duc-tility.In this study,a strategy for overcoming strength-ductility tradeoffof Cu alloys is realized through the in...Dispersion-strengthened copper alloys can achieve ultra-high strength,but usually at the expense of duc-tility.In this study,a strategy for overcoming strength-ductility tradeoffof Cu alloys is realized through the introduction of bimodal grains structures.Cu-Ta alloys with only 0.5 at.%Ta content were successfully prepared by mechanical alloying combined with spark plasm sintering.The samples prepared by one-step and two-step ball milling methods are named as Cu-Ta(Ⅰ)and Cu-Ta(Ⅱ),respectively.The microstructural characterizations revealed that ultra-fine equiaxed grains with uniformly dispersed Ta precipitates were obtained in the Cu-Ta alloys.High strength of 377 MPa for yield strength together with elongation of∼8%was obtained in Cu-Ta(Ⅰ).Bimodal grains structures composed of fine-grain zones and coarse-grain zones were successfully introduced into Cu-Ta(Ⅱ)by a two-step ball milling approach,and both yield strength(463 MPa)and elongation(∼15%)were significantly synergistic enhanced.The hardness values of both Cu-Ta(Ⅰ)and Cu-Ta(Ⅱ)were almost kept nearly constant with the increase of annealing time,and the softening temperatures of Cu-Ta(Ⅰ)and Cu-Ta(Ⅱ)are 1018 and 1013℃,reaching 93.9%and 93.5%T m of pure Cu(1083℃),respectively.It reveals that the Cu-0.5 at.%Ta alloys exhibit excellent thermal stability and exceptional softening resistance.Ta nanoclusters with semi-coherent structures play an essential role in enhancing the strength and microstructural stability of alloys.Bimodal structures are beneficial to the activation of back stress strengthening and the initiation and propagation of microcracks,thus obtaining the extraordinary combination of strength and elongation.This study provides a new way to fabricate dispersion-strengthened Cu alloys with high strength,high elongation,excellent thermal stability and softening resistance,which have potential application value in the field of the future fusion reactor.展开更多
Osteoarthritis(OA)is a highly incident total joint degenerative disease with cartilage degeneration as the primary pathogenesis.The cartilage matrix is mainly composed of collagen,a matrix protein with a hallmark trip...Osteoarthritis(OA)is a highly incident total joint degenerative disease with cartilage degeneration as the primary pathogenesis.The cartilage matrix is mainly composed of collagen,a matrix protein with a hallmark triplehelix structure,which unfolds with collagen degradation on the cartilage surface.A collagen hybridizing peptide(CHP)is a synthetic peptide that binds the denatured collagen triple helix,conferring a potential diseasetargeting possibility for early-stage OA.Here,we constructed an albumin nanoparticle(An)conjugated with CHP,loaded with a chondrogenesis-promoting small molecule drug,kartogenin(KGN).The CHP-KGN-An particle exhibited sustained release of KGN in vitro and prolonged in vivo retention selectively within the degenerated cartilage in the knee joints of model mice with early-stage OA.Compared to treatment with KGN alone,CHP-KGN-An robustly attenuated cartilage degradation,synovitis,osteophyte formation,and subchondral bone sclerosis in OA model mice and exhibited a more prominent effect on physical activity improvement and pain alleviation.Our study showcases that targeting the degenerated cartilage by collagen hybridization can remarkably promote the efficacy of small molecule drugs and may provide a novel delivery strategy for earlystage OA therapeutics.展开更多
Power-conversion-efficiencies(PCEs)of organic solar cells(OSCs)in laboratory,normally processed by spin-coating technology with toxic halogenated solvents,have reached over 19%.However,there is usually a marked PCE dr...Power-conversion-efficiencies(PCEs)of organic solar cells(OSCs)in laboratory,normally processed by spin-coating technology with toxic halogenated solvents,have reached over 19%.However,there is usually a marked PCE drop when the bladecoating and/or green-solvents toward large-scale printing are used instead,which hampers the practical development of OSCs.Here,a new series of N-alkyl-tailored small molecule acceptors named YR-SeNF with a same molecular main backbone are developed by combining selenium-fused central-core and naphthalene-fused endgroup.Thanks to the N-alkyl engineering,NIR-absorbing YR-SeNF series show different crystallinity,packing patterns,and miscibility with polymeric donor.The studies exhibit that the molecular packing,crystallinity,and vertical distribution of active layer morphologies are well optimized by introducing newly designed guest acceptor associated with tailored N-alkyl chains,providing the improved charge transfer dynamics and stability for the PM6:L8-BO:YRSeNF-based OSCs.As a result,a record-high PCE approaching 19%is achieved in the blade-coating OSCs fabricated from a greensolvent o-xylene with high-boiling point.Notably,ternary OSCs offer robust operating stability under maximum-power-point tracking and well-keep>80%of the initial PCEs for even over 400 h.Our alkyl-tailored guest acceptor strategy provides a unique approach to develop green-solvent and blade-coating processed high-efficiency and operating stable OSCs,which paves a way for industrial development.展开更多
基金National Key Research and Development Program of China(No.2017YFA0700704)National Defense Basic Scientific Research Program of China(Grant No.JCKY2022130C005)+3 种基金National Natural Science Foundation of China(No.U22A20129)National Science and Technology Major Project(No.2017-VI-0002–0072)National Key Research and Development Program of China(No.2018YFB1106600)Students’Innovation and Entrepreneurship Foundation of USTC(Nos.CY2022G10 and CY2022C24)。
文摘The demand for the swirl nozzle with enhanced temperature resistance and lightweight properties is in-creasing as the thrust-to-weight ratio of aero-engines rises.The Al_(2)O_(3) ceramic swirl nozzle can maintain high strength in a hostile environment of high temperature and severe corrosion,while also meeting the requirements of aircraft to enhance efficiency and decrease weight.However,Al_(2)O_(3) ceramics are limited in their application for aerospace components due to their poor thermal shock resistance(TSR)stemming from their inherent brittleness.This work reported an innovative design and fabrication strategy based on photopolymerization 3D printing technology to realize the three-dimensional shell structure through element interdiffusion and nanoscale stacking of the reinforced phase.With this strategy,a novel type of the new dual-structure Al_(2)O_(3) ceramic composed of MgAl_(2)O_(4) shell structure and matrix could be con-structed in situ.The nano-sized MgAl_(2)O_(4) caused a crack passivation effect after the thermal shock,which could improve the strength and TSR of 3D-printed Al_(2)O_(3) ceramic.In addition,the effects of MgO content and sintering temperature on sintering behavior,flexural strength,porosity,and TSR of Al_(2)O_(3) ceram-ics manufactured by digital light processing(DLP)processing were systematically studied.The optimum overall performance of Al_(2)O_(3) ceramics was obtained at the sintering temperature of 1550℃and the MgO content of 1.0 wt.%,with a maximum flexural strength of 111.929 MPa and a critical temperature difference of 374.24℃for TSR.Based on the above research,an aero-engine swirl nozzle with high ther-mal shock resistance has been successfully prepared by ceramic 3D printing technology,which enhances high-temperature resistance and promotes lightweight design in aero-engine.
文摘Intramedullary tumors are a class of central nervous system tumors with an incidence of 2 to 4%.As they are located very deep and frequently cause postoperative neurological complications,surgical resection is difficult.In recent years,many surgeons have performed electrophysiological monitoring to effectively reduce the occurrence of post-operative neurological complications.Modern electrophysiological monitoring technology has advanced considerably,leading to the development of many monitoring methods,such as SSEPs,MEPs,DCM,and EMG,to monitor intramedullary tumors.However,electrophysiological monitoring in tumor resection is still being studied.In this article,we discussed the different monitoring methods and their role in monitoring intramedullary tumors by reviewing previous studies.Intratumorally tumors need to be monitored for a summary of the condition of the patient.Only by using various monitoring methods flexibly and through clear communication between surgeons and neurophysiological experts can good decisions be made during surgery and positive surgical results be achieved.
基金National Key R&D Project of China(No.2022YFC2401800)National Natural Science Foundation of China(32071352 and 32271419).
文摘Regulating macrophage phenotypes to reconcile the conflict between bacterial suppression and tissue regeneration is ideal for treating infectious skin wounds. Here, an injectable immunoregulatory hydrogel (SrmE20) that sequentially drives macrophage phenotypic polarization (M0 to M1, then to M2) was constructed by integrating anti-inflammatory components and proinflammatory solvents. In vitro experiments demonstrated that the proinflammatory solvent ethanol stabilized the hydrogel structure, maintained the phenolic hydroxyl group activity, and achieved macrophages' proinflammatory transition (M0 to M1) to enhance antibacterial effects. With ethanol depletion, the hydrogel's cations and phenolic hydroxyl groups synergistically regulated macrophages' anti-inflammatory transition (M1 to M2) to initiate regeneration. In the anti-contraction full-thickness wound model with infection, this hydrogel effectively eliminated bacteria and even achieved anti-inflammatory M2 macrophage accumulation at three days post-surgery, accelerated angiogenesis and collagen deposition. By sequentially driving macrophage phenotypic polarization, this injectable immunoregulatory hydrogel will bring new guidance for the care and treatment of infected wounds.
基金supported by the National Natural Science Foundation of China (Grant No.52005434)the China Scholarship Council (Grant No.202008320145)+1 种基金the China Postdoctoral Science Foundation (Grant No.2023M733151)the Natural Science Foundation of Jiangsu Province (Grant No.BK20190912).
基金supported by the National Natural Science Foundation of China(Nos.51971021,52203382,and U1967212)the National Magnetic Confinement Fusion Program of China(Nos.2019YFE03120004 and 2019YFE03130002)the Natu-ral Science Basic Research Plan in Shaanxi Province of China(No.2022JQ-439).
文摘Dispersion-strengthened copper alloys can achieve ultra-high strength,but usually at the expense of duc-tility.In this study,a strategy for overcoming strength-ductility tradeoffof Cu alloys is realized through the introduction of bimodal grains structures.Cu-Ta alloys with only 0.5 at.%Ta content were successfully prepared by mechanical alloying combined with spark plasm sintering.The samples prepared by one-step and two-step ball milling methods are named as Cu-Ta(Ⅰ)and Cu-Ta(Ⅱ),respectively.The microstructural characterizations revealed that ultra-fine equiaxed grains with uniformly dispersed Ta precipitates were obtained in the Cu-Ta alloys.High strength of 377 MPa for yield strength together with elongation of∼8%was obtained in Cu-Ta(Ⅰ).Bimodal grains structures composed of fine-grain zones and coarse-grain zones were successfully introduced into Cu-Ta(Ⅱ)by a two-step ball milling approach,and both yield strength(463 MPa)and elongation(∼15%)were significantly synergistic enhanced.The hardness values of both Cu-Ta(Ⅰ)and Cu-Ta(Ⅱ)were almost kept nearly constant with the increase of annealing time,and the softening temperatures of Cu-Ta(Ⅰ)and Cu-Ta(Ⅱ)are 1018 and 1013℃,reaching 93.9%and 93.5%T m of pure Cu(1083℃),respectively.It reveals that the Cu-0.5 at.%Ta alloys exhibit excellent thermal stability and exceptional softening resistance.Ta nanoclusters with semi-coherent structures play an essential role in enhancing the strength and microstructural stability of alloys.Bimodal structures are beneficial to the activation of back stress strengthening and the initiation and propagation of microcracks,thus obtaining the extraordinary combination of strength and elongation.This study provides a new way to fabricate dispersion-strengthened Cu alloys with high strength,high elongation,excellent thermal stability and softening resistance,which have potential application value in the field of the future fusion reactor.
基金supported by the National Natural Science Foundation of China(82325035,82172481,32271409,82071977,and 92059104)the Six Talent Peaks Project of Jiangsu Province(WSW-079)+1 种基金the 2018 High-Level Health Team of Zhuhai,the Innovation Project of National Orthopedics and Sports Medicine Rehabilitation Clinical Medical Research Center(2021-NCRC-CXJJ-ZH-16)the Guangdong-Hong Kong-Macao University Joint Laboratory of Interventional Medicine Foundation of Guangdong Province(2023LSYS001).Fig.1a was created by Biorender.com.
文摘Osteoarthritis(OA)is a highly incident total joint degenerative disease with cartilage degeneration as the primary pathogenesis.The cartilage matrix is mainly composed of collagen,a matrix protein with a hallmark triplehelix structure,which unfolds with collagen degradation on the cartilage surface.A collagen hybridizing peptide(CHP)is a synthetic peptide that binds the denatured collagen triple helix,conferring a potential diseasetargeting possibility for early-stage OA.Here,we constructed an albumin nanoparticle(An)conjugated with CHP,loaded with a chondrogenesis-promoting small molecule drug,kartogenin(KGN).The CHP-KGN-An particle exhibited sustained release of KGN in vitro and prolonged in vivo retention selectively within the degenerated cartilage in the knee joints of model mice with early-stage OA.Compared to treatment with KGN alone,CHP-KGN-An robustly attenuated cartilage degradation,synovitis,osteophyte formation,and subchondral bone sclerosis in OA model mice and exhibited a more prominent effect on physical activity improvement and pain alleviation.Our study showcases that targeting the degenerated cartilage by collagen hybridization can remarkably promote the efficacy of small molecule drugs and may provide a novel delivery strategy for earlystage OA therapeutics.
基金the support from the NSFC (22209131, 22005121, 21875182, and 52173023)National Key Research and Development Program of China (2022YFE0132400)+4 种基金Key Scientific and Technological Innovation Team Project of Shaanxi Province (2020TD-002)111 project 2.0 (BP0618008)Open Fund of Jiangsu Engineering Laboratory of Light-Electricity-Heat Energy-Converting Materials and Applications (Changzhou University, GDRGCS2022002)Open Fund of Key Laboratory of Fluorine and Silicon for Energy Materials and Chemistry of Ministry of Education (Jiangxi Normal University, KFSEMC-202201)acquired at beamlines 7.3.3 and 11.0.1.2 at the Advanced Light Source, which is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC0205CH11231
文摘Power-conversion-efficiencies(PCEs)of organic solar cells(OSCs)in laboratory,normally processed by spin-coating technology with toxic halogenated solvents,have reached over 19%.However,there is usually a marked PCE drop when the bladecoating and/or green-solvents toward large-scale printing are used instead,which hampers the practical development of OSCs.Here,a new series of N-alkyl-tailored small molecule acceptors named YR-SeNF with a same molecular main backbone are developed by combining selenium-fused central-core and naphthalene-fused endgroup.Thanks to the N-alkyl engineering,NIR-absorbing YR-SeNF series show different crystallinity,packing patterns,and miscibility with polymeric donor.The studies exhibit that the molecular packing,crystallinity,and vertical distribution of active layer morphologies are well optimized by introducing newly designed guest acceptor associated with tailored N-alkyl chains,providing the improved charge transfer dynamics and stability for the PM6:L8-BO:YRSeNF-based OSCs.As a result,a record-high PCE approaching 19%is achieved in the blade-coating OSCs fabricated from a greensolvent o-xylene with high-boiling point.Notably,ternary OSCs offer robust operating stability under maximum-power-point tracking and well-keep>80%of the initial PCEs for even over 400 h.Our alkyl-tailored guest acceptor strategy provides a unique approach to develop green-solvent and blade-coating processed high-efficiency and operating stable OSCs,which paves a way for industrial development.
