The aim of this work was to propose a possibility of using plastic aggregates from waste to reduce the shrinkage and expansion observed in concrete. The process of obtaining plastic aggregates was presented. Natural a...The aim of this work was to propose a possibility of using plastic aggregates from waste to reduce the shrinkage and expansion observed in concrete. The process of obtaining plastic aggregates was presented. Natural aggregates were partially substituted by plastic aggregates in the percentages: 0%, 5%, 10%, 20% and 30%. Drying shrinkage, water absorption and expansion tests were carried out on three families of concrete: control concrete (BT), concrete with addition of BAgP-PEHD high-density polyethylene plastic aggregate and with polyvinyl chloride BAgP-PVC. Given the slow appearance of the internal sulfate attack (ISA), an experimental technique was proposed to accelerate the appearance of this pathology. This technique involves heat treatment which stimulates the heating of the concrete at a young age, followed by a cycle of drying and cooling and ends with total immersion in water. The method of measuring expansions through sample image correlation was also proposed. The results showed an increased skrinkage of BAgP-HDPE compared to BT. On the other hand, a significant decrease in shrinkage was observed in BAgP-PVC samples. Water absorption increased in BAgP-HDPE and BAgP-PVC compared to BT. Greater expansion was observed at the cement paste-plastic aggregate interface than at the cement paste-natural aggregate interface. Given these properties, BAgP-PVC can be recommended for paving surfaces exposed to the hard weather conditions.展开更多
In recent years, the rationalization of concrete mix ratios which batches equal volumes of sand and gravel in building projects has been gaining grounds in the Cameroon construction industry. The main objective of thi...In recent years, the rationalization of concrete mix ratios which batches equal volumes of sand and gravel in building projects has been gaining grounds in the Cameroon construction industry. The main objective of this study is therefore to investigate if the concrete produced with rationalized mix ratio can be adopted as conventional mix ratio in terms of minimum required compression strength of concrete for buildings. Specifically this work compared the conventional mix ratio of 350 kg of cement: 400 liters of sand: 800 liters of gravel for a cubic meter and the rationalized batch of 350 kg of cement: 600 liters of sand: 600 liters of 5/15 gravel, 15/25 gravel and a combination of 5/15 + 15/25 gravel. Average compressive tests’results for both the conventional and the rationalized mix ratios were found to meet the minimum compressive strength of 65% at 7 days, 90% at 14 days and 99% at 28 days for gravel size combination 5/15 + 15/25. Single size gravel of 5/15 and 15/25 did not meet the minimum required compressive strength of 20 N/mm<sup>2</sup> for the rationalized mix ratio at 28 days curing based on the minimum compressive strength required, this study arrives at the conclusion that the equal volumes of sand and gravel mix ratio of 350 kg/m<sup>3</sup> of cement: 600 liters of sand: 600 liters of gravel mix ratio can be adopted as a conventional concrete mix ratio for gravel size 5/15 + 15/25.展开更多
文摘The aim of this work was to propose a possibility of using plastic aggregates from waste to reduce the shrinkage and expansion observed in concrete. The process of obtaining plastic aggregates was presented. Natural aggregates were partially substituted by plastic aggregates in the percentages: 0%, 5%, 10%, 20% and 30%. Drying shrinkage, water absorption and expansion tests were carried out on three families of concrete: control concrete (BT), concrete with addition of BAgP-PEHD high-density polyethylene plastic aggregate and with polyvinyl chloride BAgP-PVC. Given the slow appearance of the internal sulfate attack (ISA), an experimental technique was proposed to accelerate the appearance of this pathology. This technique involves heat treatment which stimulates the heating of the concrete at a young age, followed by a cycle of drying and cooling and ends with total immersion in water. The method of measuring expansions through sample image correlation was also proposed. The results showed an increased skrinkage of BAgP-HDPE compared to BT. On the other hand, a significant decrease in shrinkage was observed in BAgP-PVC samples. Water absorption increased in BAgP-HDPE and BAgP-PVC compared to BT. Greater expansion was observed at the cement paste-plastic aggregate interface than at the cement paste-natural aggregate interface. Given these properties, BAgP-PVC can be recommended for paving surfaces exposed to the hard weather conditions.
文摘In recent years, the rationalization of concrete mix ratios which batches equal volumes of sand and gravel in building projects has been gaining grounds in the Cameroon construction industry. The main objective of this study is therefore to investigate if the concrete produced with rationalized mix ratio can be adopted as conventional mix ratio in terms of minimum required compression strength of concrete for buildings. Specifically this work compared the conventional mix ratio of 350 kg of cement: 400 liters of sand: 800 liters of gravel for a cubic meter and the rationalized batch of 350 kg of cement: 600 liters of sand: 600 liters of 5/15 gravel, 15/25 gravel and a combination of 5/15 + 15/25 gravel. Average compressive tests’results for both the conventional and the rationalized mix ratios were found to meet the minimum compressive strength of 65% at 7 days, 90% at 14 days and 99% at 28 days for gravel size combination 5/15 + 15/25. Single size gravel of 5/15 and 15/25 did not meet the minimum required compressive strength of 20 N/mm<sup>2</sup> for the rationalized mix ratio at 28 days curing based on the minimum compressive strength required, this study arrives at the conclusion that the equal volumes of sand and gravel mix ratio of 350 kg/m<sup>3</sup> of cement: 600 liters of sand: 600 liters of gravel mix ratio can be adopted as a conventional concrete mix ratio for gravel size 5/15 + 15/25.
