Nanostructured silver was obtained by potentiostatic electrolysis.The effects of ionized surfactant(sodium dodecanesulphonate)and the substrate(Cu and Ti)on the morphology of depositions were investigated.It is found ...Nanostructured silver was obtained by potentiostatic electrolysis.The effects of ionized surfactant(sodium dodecanesulphonate)and the substrate(Cu and Ti)on the morphology of depositions were investigated.It is found that morphologies of silver nanostructures can be simply controlled via change of the substrate.Spherical Ag nanoparticles with narrow size distribution were obtained by electrodeposition in Ag NO3-SDS aqueous solution on copper substrate.In the case of titanium substrate,silver dendrite structures were obtained.Despite of different morphologies,XRD and TEM results showed that the as-prepared samples belong to face-centered cubic silver structure with good crystallinity.The formation mechanism of different silver nanostructures was discussed.展开更多
High-pressure torsion(HPT)processing under a pressure of 6.0 GPa was applied to Ti29.7Ni50.3Hf20(at.%)alloy.Two types of structure were observed after HPT with 3 revolutions:first one is the mixture of amorphous phase...High-pressure torsion(HPT)processing under a pressure of 6.0 GPa was applied to Ti29.7Ni50.3Hf20(at.%)alloy.Two types of structure were observed after HPT with 3 revolutions:first one is the mixture of amorphous phase and retained nanocrystalline;second is the alternating bands of amorphous phase and high defect density crystalline.As a result,post deformation annealing(PDA)at 500-700℃leads to the non-uniform distribution of martensite and parent phase grains.The grains of martensite are twice larger compared to that of parent phase.The nanocrystalline and ultrafine grains form after annealing at 500-600℃and 700℃,respectively.The twinning mechanism does not change with the reduction of martensitic grains up to^35 nm.The relationship between strength and grain size in Ti29.7Ni50.3Hf20 alloy obeys the classical Hall-Petch relationship with a coefficient of 10.80±0.39 GPa nm^1/2.展开更多
Precipitate hardening is the most easiest and effective way to enhance strain recovery properties in NiTiHf high-temperature shape memory alloys.This paper discusses the precipitation,coarsening and age hardening of H...Precipitate hardening is the most easiest and effective way to enhance strain recovery properties in NiTiHf high-temperature shape memory alloys.This paper discusses the precipitation,coarsening and age hardening of H-phase precipitates in Ni_(50)Ti_(30)Hf_(20)alloy during isothermal aging at temperatures between 450℃and 650℃for time to 75 h.The H-phase mean size and volume fraction were determined using transmission electron microscopy.Precipitation kinetics was analyzed using the Johnson-Mehl-Avrami-Kolmogorov equation and an Arrhenius type law.From these analyses,a Time-Temperature-Transformation diagram was constructed.The evolution of H-phase size suggests classical matrix diffusion limited Lifshitz-Slyozov-Wagner coarsening for all considered temperatures.The coarsening rate constants of H-phase precipitation have been determined using a modified coarsening rate equation for nondilute solutions.Critical size of H-phase precipitates for breaking down the precipitate/matrix interface coherency was estimated through a combination of age hardening and precipitate size evolution data.Moreover,time-temperature-hardness diagram was constructed from the precipitation and coarsening kinetics and age hardening of H-phase precipitates in Ni_(50)Ti_(30)Hf_(20)alloy.展开更多
基金supported by the National Foundations of China-Australia Special Fund for Scientific and Technological Cooperation(grant No.20711120186)the Natural Science Foundations of China(grant No.20873184)+2 种基金the Natural Science Foundations of Guangdong Province(grant No.8151027501000095)the Science and Technology plan Projects of Guangdong Province(grant No.2008B010600040)the Instrumental Technique Research Foundation of Instrumental Analysis and Research Center,Sun Yat-sen University(grant No.2009006)
文摘Nanostructured silver was obtained by potentiostatic electrolysis.The effects of ionized surfactant(sodium dodecanesulphonate)and the substrate(Cu and Ti)on the morphology of depositions were investigated.It is found that morphologies of silver nanostructures can be simply controlled via change of the substrate.Spherical Ag nanoparticles with narrow size distribution were obtained by electrodeposition in Ag NO3-SDS aqueous solution on copper substrate.In the case of titanium substrate,silver dendrite structures were obtained.Despite of different morphologies,XRD and TEM results showed that the as-prepared samples belong to face-centered cubic silver structure with good crystallinity.The formation mechanism of different silver nanostructures was discussed.
基金supported by National Key R&D Program of China[grant number 2017YFE0123500]National Natural Science Foundation of China[grant number 51971072,51671064]+2 种基金the Fundamental Research Funds for the Central University[grant number HEUCFG201836]the support from the RFBR-CNPq-DST research project№19-58-80018the support in part from the Russian Foundation for Basic Research(project No.20-03-00614)。
文摘High-pressure torsion(HPT)processing under a pressure of 6.0 GPa was applied to Ti29.7Ni50.3Hf20(at.%)alloy.Two types of structure were observed after HPT with 3 revolutions:first one is the mixture of amorphous phase and retained nanocrystalline;second is the alternating bands of amorphous phase and high defect density crystalline.As a result,post deformation annealing(PDA)at 500-700℃leads to the non-uniform distribution of martensite and parent phase grains.The grains of martensite are twice larger compared to that of parent phase.The nanocrystalline and ultrafine grains form after annealing at 500-600℃and 700℃,respectively.The twinning mechanism does not change with the reduction of martensitic grains up to^35 nm.The relationship between strength and grain size in Ti29.7Ni50.3Hf20 alloy obeys the classical Hall-Petch relationship with a coefficient of 10.80±0.39 GPa nm^1/2.
基金supported by the National Natural Sci-ence Foundation of China(Nos.52050410340 and 51971072)the Fundamental Research Funds for the Central University(No.3072021CFJ1002).
文摘Precipitate hardening is the most easiest and effective way to enhance strain recovery properties in NiTiHf high-temperature shape memory alloys.This paper discusses the precipitation,coarsening and age hardening of H-phase precipitates in Ni_(50)Ti_(30)Hf_(20)alloy during isothermal aging at temperatures between 450℃and 650℃for time to 75 h.The H-phase mean size and volume fraction were determined using transmission electron microscopy.Precipitation kinetics was analyzed using the Johnson-Mehl-Avrami-Kolmogorov equation and an Arrhenius type law.From these analyses,a Time-Temperature-Transformation diagram was constructed.The evolution of H-phase size suggests classical matrix diffusion limited Lifshitz-Slyozov-Wagner coarsening for all considered temperatures.The coarsening rate constants of H-phase precipitation have been determined using a modified coarsening rate equation for nondilute solutions.Critical size of H-phase precipitates for breaking down the precipitate/matrix interface coherency was estimated through a combination of age hardening and precipitate size evolution data.Moreover,time-temperature-hardness diagram was constructed from the precipitation and coarsening kinetics and age hardening of H-phase precipitates in Ni_(50)Ti_(30)Hf_(20)alloy.
