Zeolite membranes offer great application potentials in membrane separation and/or reaction due to their excellent separation performance and catalytic ability. Up to present, various synthesis methods of zeolite mem-...Zeolite membranes offer great application potentials in membrane separation and/or reaction due to their excellent separation performance and catalytic ability. Up to present, various synthesis methods of zeolite mem- branes have been developed, including embedded method, in-situ hydrothermal synthesis method, and secondary growth method etc. Compared with the in-situ hydrothermal synthesis method, the secondary growth method possesses a variety of advantages such as easier operation, higher con- trollability in crystal orientation, microstructure and film thickness, leading to much better reproducibility. This review provides a concise summary and analysis of various synthesis methods reported in the literature. In particular, the secon- dary growth method was discussed in detail in terms of crys- tal orientation, defects and crystal grain layers. Some critical issues were also highlighted, which were conducive to the improvement in the synthesis technology of zeolite mem- branes.展开更多
The b-oriented silicalite-1 membrane on the substrate α-Al2O3 pre-coated with a silica-zirconia intermediate layer was synthesized by using in-situ crystallization. The influence of chemical properties of the substra...The b-oriented silicalite-1 membrane on the substrate α-Al2O3 pre-coated with a silica-zirconia intermediate layer was synthesized by using in-situ crystallization. The influence of chemical properties of the substrate surface on crystal growth and orientation was investigated. The result indicated that the surface modification by pre-coating a thin film of chitosan was conducive to the formation of b-oriented silicalite-1 membrane with good quality.展开更多
Low-toxicity single crystal Sn S nanowires had been successfully synthesized by the catalystassistant chemical vapor deposition. Au nanoparticles were applied on the ITO surface as the catalysis, using Sn S powder and...Low-toxicity single crystal Sn S nanowires had been successfully synthesized by the catalystassistant chemical vapor deposition. Au nanoparticles were applied on the ITO surface as the catalysis, using Sn S powder and S powder as forerunners. The structure, morphology and optical properties of the prepared Sn S nanowires were characterized. The experimental results show the as-synthesized nanowires are single crystalline with a preferential orientation. The synthesized Sn S nanowires show strong absorption in the visible and nearinfrared spectral region, and the direct energy band gap of Sn S nanowires is 1.46 e V.展开更多
The pore size distribution(PSD)measured by the gas bubble point(GBP)method ofceramic microfiltration(MF)membranes prepared by suspension technique was found to be signifi-cantly influenced by the membrane thickness.A ...The pore size distribution(PSD)measured by the gas bubble point(GBP)method ofceramic microfiltration(MF)membranes prepared by suspension technique was found to be signifi-cantly influenced by the membrane thickness.A culm-like model for pore structure was introduced tocharacterize the membrane pores instead of the conventional model which does not reflect the radiusvariation along the pore passages and is unable to explain the thickness effect on the membrane PSD.A laminate structure,taking the culm-like model for pore structure into consideration,was hypoth-esized for ceramic MF membranes.A mathematical model was then established to quantitativelydescribe the relationship between the membrane number PSD and the membrane thickness.Goodresults were obtained for the correlation of mean pore size and simulation of the PSD for ceramicMF membranes.展开更多
Seamless switching is an important guarantee for the inverter to work continuously without stopping when gridconnected power generation system is the transient process from grid-connected to isolated island and from i...Seamless switching is an important guarantee for the inverter to work continuously without stopping when gridconnected power generation system is the transient process from grid-connected to isolated island and from isolated island reclosing. Based on the principle of pre-synchronous operation of traditional synchronous generators, this paper analyzes the principle of pre-synchronous process and its effect on the steady-state of micro grid with multiple virtual synchronous generators. At the same time, the paper analyzes the transient influence of the closed pre-synchronous switch on the power distribution of the micro grid under different phase modes. This paper proposes a pre-synchronous control strategy based on phase recognition. MATLAB/Simulink simulation software is used to verify the correctness and validity of the proposed method.展开更多
The mechanical strength of solid catalysts is one of the key parameters for reliable and efficient perform-ance of a fixed bed reactor. Some recent developments and their basic mechanics within this context are review...The mechanical strength of solid catalysts is one of the key parameters for reliable and efficient perform-ance of a fixed bed reactor. Some recent developments and their basic mechanics within this context are reviewed. The main concepts discussed are brittle fracture which leads to the mechanical failure of the catalyst pellets, measurement and statistical properties of the catalyst strength data, and mechanical reliability of the catalyst pellets and their packed bed. The scientific basis for the issues on the catalyst mechanical properties calls yet for further elucidation and ad-vancement.展开更多
There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B fac...There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B factories, and the observation of an intriguing proton-antiproton threshold enhancement and the possibly related X(1835) meson state at BESⅢ, as well as the threshold measurements of charm mesons and charm baryons. We present a detailed survey of the important topics in tau-charm physics and hadron physics that can be further explored at BESⅢ during the remaining operation period of BEPCⅡ. This survey will help in the optimization of the data-taking plan over the coming years, and provides physics motivation for the possible upgrade of BEPCⅡ to higher luminosity.展开更多
In authors’ previous work [Mater. Charact. 141 (2018) 212-222]. it was found that the heterogeneous deformed microstructures can be replaced by the relatively homogeneous recrystallized grains through an annealing tr...In authors’ previous work [Mater. Charact. 141 (2018) 212-222]. it was found that the heterogeneous deformed microstructures can be replaced by the relatively homogeneous recrystallized grains through an annealing treatment. However, there are still some relatively large recrystallized grains. To find the reasons for the formation of large grains, some new annealing treatment tests were done, and the cellular automation (CA) simulations were carried out in the present work. The experimental results showed that the microstructural evolution during annealing treatment is significantly affected by the content of S phase. So. the effects of δ phase on the nucleation and growth of grains are carefully considered in the CA model to accurately simulate the microstructural evolution behavior. By the CA simulation, it is found that the dislocation density rapidly decreases due to the nucleation of static recrystallization (SRX) and the growth of dynamc recrystallization (DRX) nuclei at the early stage of annealing. The high initial dislocation density provide the high velocity for the growth of DRX nuclei, which is responsible for the formation of coarse grains, However, the growth rate of SRX nuclei is relatively small due to the low dislocation density and pinning effects of δ phase.展开更多
The uniform refinement mechanisms and methods of deformed mixed and coarse grains inside a solution-treatment Ni-based superalloy during two-stage annealing treatment have been investigated.The two-stage heat treatmen...The uniform refinement mechanisms and methods of deformed mixed and coarse grains inside a solution-treatment Ni-based superalloy during two-stage annealing treatment have been investigated.The two-stage heat treatment experiments include an aging annealing treatment(AT)and a subsequent recrystallization annealing treatment(RT).The object of AT is to precipitate someδphases and consume part of storage energy to inhibit the grain growth during RT,while the RT is to refine mixed and coarse grains by recrystallization.It can be found that the recrystallization grains will quickly grow up to a large size when the AT time is too low or the RT temperature is too high,while the deformed coarse grains cannot be eliminated when the AT time is too long or the RT temperature is too low.In addition,the mixed microstructure composed of some abnormal coarse recrystallization grains(ACRGs)and a large number of fine grains can be observed in the annealed specimen when the AT time is 3 h and RT temperature is 980℃.The phenomenon attributes to the uneven distribution ofδphase resulted from the heterogeneous deformation energy when the AT time is too short.In the regions with a large number ofδphases,the recrystallization nucleation rate is promoted and the growth of grains is limited,which results in fine grains.However,in the regions with fewδphases,the recrystallization grains around grain boundaries can easily grow up,and the new recrystallization nucleus is difficult to form inside grain,which leads to ACRGs.Thus,in order to obtain uniform and fine annealed microstructure,it is a prerequisite to precipitate even-distributedδphase by choosing a suitable AT time,such as 12 h.Moreover,a relative high RT temperature is also needed to promote the recrystallization nucleation aroundδphase.The optimal annealing parameters range for uniformly refining mixed crystal can be summarized as:900℃×12 h+990℃×(40-60 min)and 900℃×12 h+1000℃×(10-15 min).展开更多
The mechanical properties and microstructure characteristics of a high speed steel (HSS) for roll has been studied. As compared with the as-cast HSS, the spray-formed HSS have fine grain and segregation free microstru...The mechanical properties and microstructure characteristics of a high speed steel (HSS) for roll has been studied. As compared with the as-cast HSS, the spray-formed HSS have fine grain and segregation free microstructures. Carbides distribute uniformly. The morphology and types of the carbides in spray-formed HSS are different from those in as-cast HSS. The results of the high temperature tensile experiment show that, as to spray-formed HSS, there is a possibility of superplastic deformation in the range of 780-810℃.展开更多
Isothermal compression experiments were conducted to study the hot deformation behaviors of a Sr-modified Al-Si-Mg alloy in the temperature range of 300-420°C and strain rate range of 0.01-10 s-1.A physically-bas...Isothermal compression experiments were conducted to study the hot deformation behaviors of a Sr-modified Al-Si-Mg alloy in the temperature range of 300-420°C and strain rate range of 0.01-10 s-1.A physically-based model was developed to accurately predict the flow stress.Meanwhile,processing maps were established to optimize hot working parameters.It is found that decreasing the strain rate or increasing the deformation temperature reduces the flow stress.The high activation energy is closely related to the pinning of dislocations from Si-containing dispersoids.Moreover,the deformed grains and the Si-containing dispersoids in the matrix are elongated perpendicular to the compression direction,and incomplete dynamic recrystallization(DRX)is discovered on the elongated boundaries in domain with peak efficiency.The flow instability is mainly attributed to the flow localization,brittle fracture of eutectic Si phase,and formation of adiabatic shear band.The optimum hot working window is 380-420°C and 0.03-0.28 s-1.展开更多
This work gives a comparison on the microstructural characteristics,textural discrepancies,and twinning behaviors of lamellar and equiaxed nearβ-Ti alloys during multi-pass cross rolling with a rolling reduction of 2...This work gives a comparison on the microstructural characteristics,textural discrepancies,and twinning behaviors of lamellar and equiaxed nearβ-Ti alloys during multi-pass cross rolling with a rolling reduction of 20%,50%and 80%.The results showed that the restoration mechanism of the alloy inβphase is strongly dependent on theαmorphologies,and in comparison,strain path has weaker influences on the grain refinement of theβmatrix.Therefore,the texture intensities of bothαandβphases were weakened owing to the dynamic recrystallization(DRX)of the two phases in the equiaxed microstructure.While,with regard to the lamellar microstructure,dynamic recovery(DRV)of theβphase predominated,forming elongatedβsubgrains.Besides,theαandβmatrix in lamellar microstructures obeyed the Burgers orientation relationship,which was gradually broken down until the final reduction.Lastly,the{1101}twinning exhibits a strong size effect.With the continuous DRX ofαphases,theα-twinning is suppressed owing to progressive grain refinement.The activation ofβ-twinning,namely{332}?113?and{112}?111?,in nearβ-Ti alloys is heavily dependent on the deficientβ-stabilizing elements and the local stress concentration.These findings provide an effective way to obtain ultra-fine grain microstructures of this alloy.展开更多
A new search for two-neutrino double-beta(2νββ)decay of^(136)Xe to the 0+1 excited state of 136Ba is performed with the full EXO-200 dataset.A deep learning-based convolutional neural network is used to discriminat...A new search for two-neutrino double-beta(2νββ)decay of^(136)Xe to the 0+1 excited state of 136Ba is performed with the full EXO-200 dataset.A deep learning-based convolutional neural network is used to discriminate signal from background events.Signal detection efficiency is increased relative to previous searches by EXO-200 by more than a factor of two.With the addition of the Phase II dataset taken with an upgraded detector,the median 90%confidence level half-life sensitivity of 2νββdecay to the 0+1 state of 136Ba is 2.9×10^(24)yr using a total^(136)Xe exposure of 234.1 kg yr.No statistically significant evidence for 2νββdecay to the 0^(+)_(1)state is observed,leading to a lower limit of T2ν1/2(0^(+)→0^(+)_(1))>1.4×10^(24)yr at 90%confidence level,improved by 70%relative to the current world's best constraint.展开更多
Two sets of La_(2)NiMnO_(6)ceramics with different B-site ordering degree were prepared and evaluated.The valence states of Ni^(2+)and Mn^(4+)were con-rmed,and the B-site ordering degree was estimated qualitatively us...Two sets of La_(2)NiMnO_(6)ceramics with different B-site ordering degree were prepared and evaluated.The valence states of Ni^(2+)and Mn^(4+)were con-rmed,and the B-site ordering degree was estimated qualitatively using magnetic and Raman analysis.The ordering of Ni^(2+)and Mn^(4+)was the primary origin for the relaxor-like behavior of the present ceramics.The ordering degree of B-site ions greatly affected the dielectric properties,i.e.,more ordered sample indicated higher dielectric constant.Meanwhile,the grain boundary layer capacitor(GBLC)effect was also activated but limited at the high temperatures and low frequencies.展开更多
文摘Zeolite membranes offer great application potentials in membrane separation and/or reaction due to their excellent separation performance and catalytic ability. Up to present, various synthesis methods of zeolite mem- branes have been developed, including embedded method, in-situ hydrothermal synthesis method, and secondary growth method etc. Compared with the in-situ hydrothermal synthesis method, the secondary growth method possesses a variety of advantages such as easier operation, higher con- trollability in crystal orientation, microstructure and film thickness, leading to much better reproducibility. This review provides a concise summary and analysis of various synthesis methods reported in the literature. In particular, the secon- dary growth method was discussed in detail in terms of crys- tal orientation, defects and crystal grain layers. Some critical issues were also highlighted, which were conducive to the improvement in the synthesis technology of zeolite mem- branes.
文摘The b-oriented silicalite-1 membrane on the substrate α-Al2O3 pre-coated with a silica-zirconia intermediate layer was synthesized by using in-situ crystallization. The influence of chemical properties of the substrate surface on crystal growth and orientation was investigated. The result indicated that the surface modification by pre-coating a thin film of chitosan was conducive to the formation of b-oriented silicalite-1 membrane with good quality.
基金partially supported by the National Science Foundation of China(No.50902117,No.11104126 and No.50825101)the Natural Science Foundation of Fujian Province of China(Grant No.2009J01263)+1 种基金the National Basic Research Program of China(No.2012CB933103)Scientific and Technological Innovation Platform of Fujian Province(2006L2003)
文摘Low-toxicity single crystal Sn S nanowires had been successfully synthesized by the catalystassistant chemical vapor deposition. Au nanoparticles were applied on the ITO surface as the catalysis, using Sn S powder and S powder as forerunners. The structure, morphology and optical properties of the prepared Sn S nanowires were characterized. The experimental results show the as-synthesized nanowires are single crystalline with a preferential orientation. The synthesized Sn S nanowires show strong absorption in the visible and nearinfrared spectral region, and the direct energy band gap of Sn S nanowires is 1.46 e V.
基金Supported by the National Natural Science Foundation of China.
文摘The pore size distribution(PSD)measured by the gas bubble point(GBP)method ofceramic microfiltration(MF)membranes prepared by suspension technique was found to be signifi-cantly influenced by the membrane thickness.A culm-like model for pore structure was introduced tocharacterize the membrane pores instead of the conventional model which does not reflect the radiusvariation along the pore passages and is unable to explain the thickness effect on the membrane PSD.A laminate structure,taking the culm-like model for pore structure into consideration,was hypoth-esized for ceramic MF membranes.A mathematical model was then established to quantitativelydescribe the relationship between the membrane number PSD and the membrane thickness.Goodresults were obtained for the correlation of mean pore size and simulation of the PSD for ceramicMF membranes.
文摘Seamless switching is an important guarantee for the inverter to work continuously without stopping when gridconnected power generation system is the transient process from grid-connected to isolated island and from isolated island reclosing. Based on the principle of pre-synchronous operation of traditional synchronous generators, this paper analyzes the principle of pre-synchronous process and its effect on the steady-state of micro grid with multiple virtual synchronous generators. At the same time, the paper analyzes the transient influence of the closed pre-synchronous switch on the power distribution of the micro grid under different phase modes. This paper proposes a pre-synchronous control strategy based on phase recognition. MATLAB/Simulink simulation software is used to verify the correctness and validity of the proposed method.
文摘The mechanical strength of solid catalysts is one of the key parameters for reliable and efficient perform-ance of a fixed bed reactor. Some recent developments and their basic mechanics within this context are reviewed. The main concepts discussed are brittle fracture which leads to the mechanical failure of the catalyst pellets, measurement and statistical properties of the catalyst strength data, and mechanical reliability of the catalyst pellets and their packed bed. The scientific basis for the issues on the catalyst mechanical properties calls yet for further elucidation and ad-vancement.
基金Supported in part by National Key Basic Research Program of China (2015CB856700)National Natural Science Foundation of China (NSFC) (11335008,11425524, 11625523, 11635010, 11735014, 11822506, 11935018)+18 种基金the Chinese Academy of Sciences (CAS) Large-Scale Scientific Facility Programthe CAS Center for Excellence in Particle Physics (CCEPP)Joint Large-Scale Scientific Facility Funds of the NSFC and CAS (U1532257, U1532258, U1732263)CAS Key Research Program of Frontier Science (QYZDJ-SSW-SLH003, QYZDJ-SSW-SLH040)100 Talents Program of CASCAS PIFIthe Thousand Talents Program of ChinaIN-PAC and Shanghai Key Laboratory for Particle Physics and CosmologyGerman Research Foundation DFG under Contracts NosCollaborative Research Center CRC 1044, FOR 2359Istituto Nazionale di Fisica Nucleare, ItalyKoninklijke Nederlandse Akademie van Wetenschappen (KNAW) (530-4CDP03)Ministry of Development of Turkey (DPT2006K-120470)National Science and Technology fundThe Knut and Alice Wallenberg Foundation (Sweden) (2016.0157)The Swedish Research CouncilU. S. Department of Energy (DE-FG02-05ER41374, DESC-0010118, DE-SC-0012069)University of Groningen (Ru G) and the Helmholtzzentrum fuer Schwerionenforschung Gmb H (GSI), Darmstadtthe Russian Ministry of Science and Higher Education (14.W03.31.0026).
文摘There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B factories, and the observation of an intriguing proton-antiproton threshold enhancement and the possibly related X(1835) meson state at BESⅢ, as well as the threshold measurements of charm mesons and charm baryons. We present a detailed survey of the important topics in tau-charm physics and hadron physics that can be further explored at BESⅢ during the remaining operation period of BEPCⅡ. This survey will help in the optimization of the data-taking plan over the coming years, and provides physics motivation for the possible upgrade of BEPCⅡ to higher luminosity.
基金supported by the Hunan Provincial Natural Science Foundation of China (No. 2017JJ3380)the National Natural Science Foundation of China (No. 51775564)+3 种基金the State key Laboratory of High Performance Complex Manufacturing (No. zzyjkt2014-01)the Open-End Fund for the Valuable and Precision Instruments of Central South University (No. CSUZC201821)Hebei Iron and Steel Joint Funds (No. E2015209243)the Fundamental Research Funds for the Central Universities of Central South University (No. 153711025)
文摘In authors’ previous work [Mater. Charact. 141 (2018) 212-222]. it was found that the heterogeneous deformed microstructures can be replaced by the relatively homogeneous recrystallized grains through an annealing treatment. However, there are still some relatively large recrystallized grains. To find the reasons for the formation of large grains, some new annealing treatment tests were done, and the cellular automation (CA) simulations were carried out in the present work. The experimental results showed that the microstructural evolution during annealing treatment is significantly affected by the content of S phase. So. the effects of δ phase on the nucleation and growth of grains are carefully considered in the CA model to accurately simulate the microstructural evolution behavior. By the CA simulation, it is found that the dislocation density rapidly decreases due to the nucleation of static recrystallization (SRX) and the growth of dynamc recrystallization (DRX) nuclei at the early stage of annealing. The high initial dislocation density provide the high velocity for the growth of DRX nuclei, which is responsible for the formation of coarse grains, However, the growth rate of SRX nuclei is relatively small due to the low dislocation density and pinning effects of δ phase.
基金the National Natural Science Foundation of China(No.51975593)the Hunan Provincial Natural Science Foundation of China(No.2020JJ4113)the Science and Technology Innovation Planning Project of Hunan Province(No.2019XK2301)。
文摘The uniform refinement mechanisms and methods of deformed mixed and coarse grains inside a solution-treatment Ni-based superalloy during two-stage annealing treatment have been investigated.The two-stage heat treatment experiments include an aging annealing treatment(AT)and a subsequent recrystallization annealing treatment(RT).The object of AT is to precipitate someδphases and consume part of storage energy to inhibit the grain growth during RT,while the RT is to refine mixed and coarse grains by recrystallization.It can be found that the recrystallization grains will quickly grow up to a large size when the AT time is too low or the RT temperature is too high,while the deformed coarse grains cannot be eliminated when the AT time is too long or the RT temperature is too low.In addition,the mixed microstructure composed of some abnormal coarse recrystallization grains(ACRGs)and a large number of fine grains can be observed in the annealed specimen when the AT time is 3 h and RT temperature is 980℃.The phenomenon attributes to the uneven distribution ofδphase resulted from the heterogeneous deformation energy when the AT time is too short.In the regions with a large number ofδphases,the recrystallization nucleation rate is promoted and the growth of grains is limited,which results in fine grains.However,in the regions with fewδphases,the recrystallization grains around grain boundaries can easily grow up,and the new recrystallization nucleus is difficult to form inside grain,which leads to ACRGs.Thus,in order to obtain uniform and fine annealed microstructure,it is a prerequisite to precipitate even-distributedδphase by choosing a suitable AT time,such as 12 h.Moreover,a relative high RT temperature is also needed to promote the recrystallization nucleation aroundδphase.The optimal annealing parameters range for uniformly refining mixed crystal can be summarized as:900℃×12 h+990℃×(40-60 min)and 900℃×12 h+1000℃×(10-15 min).
文摘The mechanical properties and microstructure characteristics of a high speed steel (HSS) for roll has been studied. As compared with the as-cast HSS, the spray-formed HSS have fine grain and segregation free microstructures. Carbides distribute uniformly. The morphology and types of the carbides in spray-formed HSS are different from those in as-cast HSS. The results of the high temperature tensile experiment show that, as to spray-formed HSS, there is a possibility of superplastic deformation in the range of 780-810℃.
基金Project(51375502)supported by the National Natural Science Foundation of ChinaProject(2015CX002)supported by the Innovation-driven Plan in Central South University,China+2 种基金Project(2016RS2006)supported by the Science and Technology Leading Talent in Hunan Province,ChinaProject(Q2015140)supported by the Program of Chang Jiang Scholars of Ministry of Education,ChinaProject(2016JJ1017)supported by the Natural Science Foundation for Distinguished Young Scholars of Hunan Province,China
文摘Isothermal compression experiments were conducted to study the hot deformation behaviors of a Sr-modified Al-Si-Mg alloy in the temperature range of 300-420°C and strain rate range of 0.01-10 s-1.A physically-based model was developed to accurately predict the flow stress.Meanwhile,processing maps were established to optimize hot working parameters.It is found that decreasing the strain rate or increasing the deformation temperature reduces the flow stress.The high activation energy is closely related to the pinning of dislocations from Si-containing dispersoids.Moreover,the deformed grains and the Si-containing dispersoids in the matrix are elongated perpendicular to the compression direction,and incomplete dynamic recrystallization(DRX)is discovered on the elongated boundaries in domain with peak efficiency.The flow instability is mainly attributed to the flow localization,brittle fracture of eutectic Si phase,and formation of adiabatic shear band.The optimum hot working window is 380-420°C and 0.03-0.28 s-1.
基金financial supports from the National Natural Science Foundation of China(No.51871242)Scientific and technological innovation projects of Hunan Province,China(No.2017GK2292)the National Key R&D Program of China(2018YFB0704100)。
文摘This work gives a comparison on the microstructural characteristics,textural discrepancies,and twinning behaviors of lamellar and equiaxed nearβ-Ti alloys during multi-pass cross rolling with a rolling reduction of 20%,50%and 80%.The results showed that the restoration mechanism of the alloy inβphase is strongly dependent on theαmorphologies,and in comparison,strain path has weaker influences on the grain refinement of theβmatrix.Therefore,the texture intensities of bothαandβphases were weakened owing to the dynamic recrystallization(DRX)of the two phases in the equiaxed microstructure.While,with regard to the lamellar microstructure,dynamic recovery(DRV)of theβphase predominated,forming elongatedβsubgrains.Besides,theαandβmatrix in lamellar microstructures obeyed the Burgers orientation relationship,which was gradually broken down until the final reduction.Lastly,the{1101}twinning exhibits a strong size effect.With the continuous DRX ofαphases,theα-twinning is suppressed owing to progressive grain refinement.The activation ofβ-twinning,namely{332}?113?and{112}?111?,in nearβ-Ti alloys is heavily dependent on the deficientβ-stabilizing elements and the local stress concentration.These findings provide an effective way to obtain ultra-fine grain microstructures of this alloy.
文摘A new search for two-neutrino double-beta(2νββ)decay of^(136)Xe to the 0+1 excited state of 136Ba is performed with the full EXO-200 dataset.A deep learning-based convolutional neural network is used to discriminate signal from background events.Signal detection efficiency is increased relative to previous searches by EXO-200 by more than a factor of two.With the addition of the Phase II dataset taken with an upgraded detector,the median 90%confidence level half-life sensitivity of 2νββdecay to the 0+1 state of 136Ba is 2.9×10^(24)yr using a total^(136)Xe exposure of 234.1 kg yr.No statistically significant evidence for 2νββdecay to the 0^(+)_(1)state is observed,leading to a lower limit of T2ν1/2(0^(+)→0^(+)_(1))>1.4×10^(24)yr at 90%confidence level,improved by 70%relative to the current world's best constraint.
基金supported by National Sci-ence Foundation of China under Grant numbers 50832005 and 50702049.
文摘Two sets of La_(2)NiMnO_(6)ceramics with different B-site ordering degree were prepared and evaluated.The valence states of Ni^(2+)and Mn^(4+)were con-rmed,and the B-site ordering degree was estimated qualitatively using magnetic and Raman analysis.The ordering of Ni^(2+)and Mn^(4+)was the primary origin for the relaxor-like behavior of the present ceramics.The ordering degree of B-site ions greatly affected the dielectric properties,i.e.,more ordered sample indicated higher dielectric constant.Meanwhile,the grain boundary layer capacitor(GBLC)effect was also activated but limited at the high temperatures and low frequencies.
