There have been considerable advances in the understanding of species concepts in the genus Colletotrichum.This has lead to the need to carry out fresh surveys of Colletotrichum species associated with important hosts...There have been considerable advances in the understanding of species concepts in the genus Colletotrichum.This has lead to the need to carry out fresh surveys of Colletotrichum species associated with important hosts.Colletotrichum species are associated with Citrus plants as saprobes,important pre-harvest and post-harvest pathogens,as well as endophytes.In this study,a total of 312 Colletotrichum strains were isolated from leaves,shoots and fruits of cultivated Citrus and Fortunella species with or without disease symptoms across the main citrus production areas in China.The morphology of all strains were studied and multilocus(ACT,TUB2,CAL,GAPDH,GS,ITS)phylogeny established.Strains were from four important species complexes of Colletotrichum,namely C.gloeosporioides species complex,C.boninense species complex,C.acutatum species complex and a final group including C.truncatum,which was rare on Citrus species.The species belonging to the C.gloeosporioides species complex comprised C.gloeos porioides and C.fructicola,the C.boninense complex comprised C.karstii and a new species C.citricola and the C.acutatum complex included a new species,C.citri.The ability of strains to cause anthracnose on citrus fruits was tested by inoculation and strains of Colletotrichum gloeosporioides,C.fructicola and C.truncatum were pathogenic.展开更多
Low temperature plasma nitrocarburizing of 17-4PH martensitic stainless steel was conducted at 430 ℃ with and without rare earth （RE） addition. The microstructure, kinetics, microhardness, wear behavior as well as ...Low temperature plasma nitrocarburizing of 17-4PH martensitic stainless steel was conducted at 430 ℃ with and without rare earth （RE） addition. The microstructure, kinetics, microhardness, wear behavior as well as corrosion resistance of the modified layer were studied by optical microscopy, X-ray diffraction, Vickers microhardness tester, pin-on-disc tribometer and potentiodynamic polarization tests. The results show that the thickness of plasma RE nitrocarburized layer is much thicker than that formed by nitrocarburizing without RE addition. The incorporation of RE does not change the kind of the phases and the nitrocarburized layer consists mainly of nitrogen and carbon expanded martensite （aN）, γ-Fe4N and a-Fe with a trace of CrN phases. The surface microhardness of plasma nitrocarburized layer can be increased by 100 HV after RE addition. Wear resistance of the specimen can be apparently improved by low temperature plasma nitrocarburizing with and without RE addition and without sacrificing its corrosion resistance. Wear reduction effect of low temperature plasma nitrocarburizing with RE addition is better than that of the conventional one.展开更多
A new search for two-neutrino double-beta(2νββ)decay of^(136)Xe to the 0+1 excited state of 136Ba is performed with the full EXO-200 dataset.A deep learning-based convolutional neural network is used to discriminat...A new search for two-neutrino double-beta(2νββ)decay of^(136)Xe to the 0+1 excited state of 136Ba is performed with the full EXO-200 dataset.A deep learning-based convolutional neural network is used to discriminate signal from background events.Signal detection efficiency is increased relative to previous searches by EXO-200 by more than a factor of two.With the addition of the Phase II dataset taken with an upgraded detector,the median 90%confidence level half-life sensitivity of 2νββdecay to the 0+1 state of 136Ba is 2.9×10^(24)yr using a total^(136)Xe exposure of 234.1 kg yr.No statistically significant evidence for 2νββdecay to the 0^(+)_(1)state is observed,leading to a lower limit of T2ν1/2(0^(+)→0^(+)_(1))>1.4×10^(24)yr at 90%confidence level,improved by 70%relative to the current world's best constraint.展开更多
On the basis of the Euler-Bernoulli hypothesis, nonlinear static and dynamic responses of a viscoelastic microbeam under two kinds of electric forces [a purely direct current （DC） and a combined current composed of ...On the basis of the Euler-Bernoulli hypothesis, nonlinear static and dynamic responses of a viscoelastic microbeam under two kinds of electric forces [a purely direct current （DC） and a combined current composed of a DC and an alternating current] are studied. By using Taylor series expansion, a governing equation of nonlinear integro-differential type is derived, and numerical analyses are performed. When a purely DC is applied, there exist an instantaneous pull-in voltage and a durable pull-in voltage of which the physical meanings are also given, whereas under an applied combined current, the effect of the element relaxation coefficient on the dynamic pull-in phenomenon is observed where the largest Lyapunov exponent is taken as a criterion for the dynamic pull-in instability of viscoelastic microbeams.展开更多
Based on Timoshenko-Mindlin kinematic hypotheses and Hamilton's principle,a dynamic non-linear theory for general laminated circular cylindrical shells with transverse shear deformation is developed.A multi-mode s...Based on Timoshenko-Mindlin kinematic hypotheses and Hamilton's principle,a dynamic non-linear theory for general laminated circular cylindrical shells with transverse shear deformation is developed.A multi-mode solution for periodic in- plane loads is formulated for the non-linear dynamic stability of an anti-symmetric angle-ply cylinder with its ends elastically restrained against rotation.The resulted equations in terms of time function are solved by the incremental harmonic balance method.展开更多
Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays...Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η).The fit fractions of individual components are obtained,and large interferences among the dominant components of the decays D^(0)→a_(1)(1260)π,D^(0)→π(1300)π,D^(0)→ρ(770)ρ(770),and D^(0)→2(ππ)_(S)are observed in both channels.With the obtained amplitude model,the CP-even fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are determined to be(75.2±1.1_(stat).±1.5_(syst.))%and(68.9±1.5_(stat).±2.4_(syst.))%,respectively.The branching fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are measured to be(0.688±0.010_(stat.)±0.010_(syst.))%and(0.951±0.025_(stat.)±0.021_(syst.))%,respectively.The amplitude analysis provides an important model for the binning strategy in measuring the strong phase parameters of D^(0)→4πwhen used to determine the CKM angleγ(ϕ_(3))via the B^(−)→DK^(−)decay.展开更多
In the context of tensor network states,we for the first time reformulate the corner transfer matrix renormalization group(CTMRG)method into a variational bilevel optimization algorithm.The solution of the optimizatio...In the context of tensor network states,we for the first time reformulate the corner transfer matrix renormalization group(CTMRG)method into a variational bilevel optimization algorithm.The solution of the optimization problem corresponds to the fixed-point environment pursued in the conventional CTMRG method,from which the partition function of a classical statistical model,represented by an infinite tensor network,can be efficiently evaluated.The validity of this variational idea is demonstrated by the high-precision calculation of the residual entropy of the dimer model,and is further verified by investigating several typical phase transitions in classical spin models,where the obtained critical points and critical exponents all agree with the best known results in literature.Its extension to three-dimensional tensor networks or quantum lattice models is straightforward,as also discussed briefly.展开更多
Silicon carbonitride (SiCN) coatings were deposited on silicon and tungsten carbide substrates by co-sputtering silicon and carbon in argon and nitrogen mixture atmosphere using magnetron-sputtering system. The effect...Silicon carbonitride (SiCN) coatings were deposited on silicon and tungsten carbide substrates by co-sputtering silicon and carbon in argon and nitrogen mixture atmosphere using magnetron-sputtering system. The effect of the N2 concentration, RF substrate bias voltage and target current on film deposition rate, roughness, adhesion, mechanical and tribological properties of coatings were investigated. The deposition rate was found to increase with the increasing nitrogen concentration. X-ray photoelectron spectroscopy analysis showed that high nitrogen concentration in the nitrogen-argon gas mixture enhanced the incorporation of C and N but reduced the incorporation of Si. SiCN coatings have good tribological properties at a N2 concentration of approximately 60%.展开更多
There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B fac...There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B factories, and the observation of an intriguing proton-antiproton threshold enhancement and the possibly related X(1835) meson state at BESⅢ, as well as the threshold measurements of charm mesons and charm baryons. We present a detailed survey of the important topics in tau-charm physics and hadron physics that can be further explored at BESⅢ during the remaining operation period of BEPCⅡ. This survey will help in the optimization of the data-taking plan over the coming years, and provides physics motivation for the possible upgrade of BEPCⅡ to higher luminosity.展开更多
Sludge consisting of heavy element phases and oxides is often generated during the casting operation of aluminum(Al)and magnesium(Mg)alloys.With the help of the well-established Sludge Factor(SF)formula,it is relative...Sludge consisting of heavy element phases and oxides is often generated during the casting operation of aluminum(Al)and magnesium(Mg)alloys.With the help of the well-established Sludge Factor(SF)formula,it is relatively easy to control the sludge generation in aluminum alloys.But formation mechanisms and characteristics of sludge in die casting magnesium alloys are still unclear.To ensure the production of high quality die cast components at a low cost,a full understanding of sludge in die casting Mg alloys and its proper control measures need to be developed,since excessive sludge formation affects deleteriously material and operation cost,and casting performance.In the present report,the formation,characteristics and control of Mg die-casting sludge,based on the established knowledge of sludge formation and sludge factor in Al die casting alloys,are reviewed.Previous work on characterization and assessment of sludge in die cast Mg alloys are reviewed.Metallurgical principles for control of sludge in ingot production in association with die casting of Mg alloys are discussed.Rapid assessment of Mg oxide and intermetallics relevant to sludge formation in Mg alloys are highlighted.展开更多
Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important issue.But,very often it is overlooked by academia,original equipment manufacturers(OEM)...Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important issue.But,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die casters.The aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process parameters.The Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn ratio.The design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding time.The sludge yield(SY)and intermetallic size(IS)was selected as two responses.The optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,respectively.The best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,respectively.Three groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg alloys.The CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental data.The Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed easily.The Physical Sludge Factor could be used for mass production with a single type of Mg 展开更多
We study the hadronic decays of ∧c+ to the final states ∑+η and ∑+η’,using an e+e-annihilation data sample of 567 pb-1 taken at a center-of-mass energy of 4.6 GeV with the BESIII detector at the BEPCⅡ collider....We study the hadronic decays of ∧c+ to the final states ∑+η and ∑+η’,using an e+e-annihilation data sample of 567 pb-1 taken at a center-of-mass energy of 4.6 GeV with the BESIII detector at the BEPCⅡ collider.We find evidence for the decays ∧c+→∑+η and ∑+η’ with statistical significance of 2.5σ and 3.2σ,respectively.Normalizing to the reference decays ∧c+→∑+π0 and ∑+ω,we obtain the ratios of the branching fractions■and ■to be 0.35±0.16±0.02 and 0.86±0.34±0.04,respectively.The upper limits at the 90% confidence level are set to be■and■.Using BESIII measurements of the branching fractions of the reference decays,we determine B（∧c+→∑+η）=（0.41±0.19±0.05）%（<0.68%）and B（∧c+→∑+η’）=（1.34±0.53 ±0.19）%（<1.9%）.Here,the first uncertainties are statistical and the second systematic.The obtained branching fraction of ∧c+→∑+η is consistent with the previous measurement,and the branching fraction of ∧c+→∑+η’ is measured for the first time.展开更多
Studies of e^+e~→D_s^+■^((*)0)K^-and the P-wave charmed-strange mesons are performed based on an e^+e^-collision data sample corresponding to an integrated luminosity of 567 pb^(-1) collected with the BESIII detecto...Studies of e^+e~→D_s^+■^((*)0)K^-and the P-wave charmed-strange mesons are performed based on an e^+e^-collision data sample corresponding to an integrated luminosity of 567 pb^(-1) collected with the BESIII detector at s^(1/2)=4.600 GeV. The processes of e^+e^-→D_s^+■^(*0)K^- and D_s^+■~0K^- are observed for the first time and are found to be dominated by the modes D_s^+D_(s1)(2536)^-and D_s^+D_(s2)~*(2573)^-, respectively. The Born cross sections are measured to be σ~B(e^+e^-→D_s^+■^(*0)K^-) =(10.1±2.3±0.8) pb and σ~B(e^+e^-→D_s^+■~0K^-) =(19.4±2.3± 1.6) pb, and the products of Born cross section and the decay branching fraction are measured to be σ~B(e^+e^-→D_s^+D_(s1)(2536)^-+c.c.)·B(D_(s1)(2536)^-→■^(*0)K^-)=(7.5±1.8±0.7) pb and σ~B(e^+e^-→D_s^+D_(s2)~*(2573)^-+ c.c.)·B(D_(s2)~*(2573)^-→■~0 K^-)=(19.7 ± 2.9 ±2.0) pb. For the D_(s1)(2536)^-and D_(s2)~*(2573)^-mesons, the masses and widths are measured to be M(D_(s1)(2536)^-)=(2537.7±0.5 ±3.1) MeV/c2, Γ(D_(s1)(2536)^-) =(1.7 ±1.2 ±0.6)MeV, and M(D_(s2)~*(2573)^-)=(2570.7±2.0 ±1.7) MeV/c^2, Γ(D_(s2)~*(2573)^-)=(17.2 ±3.6 ±1.1) MeV. The spin-parity of the D_(s2)~*(2573)^-meson is determined to be J^p= 2^+. In addition, the processes e^+e^-→D_s^+■^((*)0)K^-are searched for using the data samples taken at four(two) center-of-mass energies between 4.416(4.527) and 4.575 GeV, and upper limits at the 90% confidence level on the cross sections are determined.展开更多
Photocatalytic degradations of p-nitrochlorbenzene (p-NCB) with distilled water wereinvestigated with ZnO crystals (catalyst) of 70nm in diameter under UV irradiation.The suitable experimental conditions are determine...Photocatalytic degradations of p-nitrochlorbenzene (p-NCB) with distilled water wereinvestigated with ZnO crystals (catalyst) of 70nm in diameter under UV irradiation.The suitable experimental conditions are determined as: ZnO 0.25g, pH 7, p-NCBconcentration 30mg/L. These variables in terms of the degradation rate have beendiscussed, which was defined as the rate of the initial degradation to the final degrada-tion of p-NCB. When all of the experimental degradation rate values are plotted as afunction of irradiation time, all of the points appeared on a single line for wide range ofp-NCB degradations. On the basis of these results, it has been concluded that at lowerZnO catalyst amount, much of the light is transmitted through the slurry in the con-tainer beaker, while at higher catalyst amount, all the incident photons are observedby the slurry. Degradation rates of p-NCB were found to decrease with increasingsolution pH. It has been concluded that the maximum degradation rate values of p-NCB under principally the same experimental conditions mentioned above are 97.4%,98.8% and 95.5% at 100min respectively. The results suggest that the photocatalyticdegradation is initiated by an oxidation of the p-NCB through ZnO surface-adsorbedhydroxyl radicals. Absorption spectra are recorded using spectrophotometer before andafter UV-irradiation in the wavelength range 200-400nm at room temperature. Itis found that the variation of irradiation time over the range 20-100min resulted inchange in the form of the spectrum linear absorption and a higher maximum valuewill be obtained at longer irradiation time.展开更多
In ordertoimprovethe dischargecapacity of Ti2 Ni hydrogen storage alloy, the phases and effecton the property for Ti Nialloy with alittle La( La contentisbetween 5 25 wt% and12 62 wt%) were investigated in this pa...In ordertoimprovethe dischargecapacity of Ti2 Ni hydrogen storage alloy, the phases and effecton the property for Ti Nialloy with alittle La( La contentisbetween 5 25 wt% and12 62 wt%) were investigated in this paper. It is found that La exists in the form ofLaNi5 ,thesecond phase,in Ti Nialloy when La> 8 wt% . LaNi5 phasecaneffectivelyim provethe activity property and discharge capacity of Ti Ni alloy. While the soluble Ti inmain phase Ti2 Niisadverseto hydrogen adsorption desorption cycle and itshould be dimin ished .展开更多
Nanometer Zn particles with mean diameters 12-100nm made by evaporating its powders in argon gas were studied mainly by X-ray diffraction and electron microscopy. They are collected at various distances and those fact...Nanometer Zn particles with mean diameters 12-100nm made by evaporating its powders in argon gas were studied mainly by X-ray diffraction and electron microscopy. They are collected at various distances and those factors influencing the mean particle size were studied. The optimal synthetic conditions were obtained, i.e., evaporation temperature is 1200℃; argon flow rate is 0.4m3/h; amount of powder charged is 3g; distance from evaporation source is 10cm. It was found that the size of particles was governed by argon flow rate, evaporation temperature, amount of metal charged and distance from the source. The size increases remarkably with distance in the space where no metal vapor exists. This implies that the crystallites grow by coalescence. Electron micrographs and diffraction patterns are reproduced to show the size, shape and state of oxidations. Nanoparticles with definite crystal habits were sometimes observed among those with irregular ones.展开更多
A reduced surface electric field in an AlGaN/GaN high electron mobility transistor （HEMT） is investigated by employing a localized Mg-doped layer under the two-dimensional electron gas （2-DEG） channel as an electr...A reduced surface electric field in an AlGaN/GaN high electron mobility transistor （HEMT） is investigated by employing a localized Mg-doped layer under the two-dimensional electron gas （2-DEG） channel as an electric field shaping layer. The electric field strength around the gate edge is effectively relieved and the surface electric field is distributed evenly as compared with those of HEMTs with conventional source-connected field plate and double field plate structures with the same device physical dimensions. Compared with the HEMTs with conventional sourceconnected field plates and double field plates, the HEMT with a Mg-doped layer also shows that the breakdown location shifts from the surface of the gate edge to the bulk Mg-doped layer edge. By optimizing both the length of Mg-doped layer, Lm, and the doping concentration, a 5.5 times and 3 times the reduction in the peak electric field near the drain side gate edge is observed as compared with those of the HEMTs with source-connected field plate structure and double field plate structure, respectively. In a device with VGS = -5 V, Lm 1.5 m, a peak Mg doping concentration of 8×10^17 cm-3 and a drift region length of 10 m, the breakdown voltage is observed to increase from 560 V in a conventional device without field plate structure to over 900 V without any area overhead penalty.展开更多
基金supported by the China Agriculture Research System (CARS-27)L. Cai acknowledges grantsKSCX2-YW-Z-1026 ⁄ NSFC31070020K.D. Hyde thanks theNational Research Council of Thailand, Colletotrichum grant number54201020003 for financial support.
文摘There have been considerable advances in the understanding of species concepts in the genus Colletotrichum.This has lead to the need to carry out fresh surveys of Colletotrichum species associated with important hosts.Colletotrichum species are associated with Citrus plants as saprobes,important pre-harvest and post-harvest pathogens,as well as endophytes.In this study,a total of 312 Colletotrichum strains were isolated from leaves,shoots and fruits of cultivated Citrus and Fortunella species with or without disease symptoms across the main citrus production areas in China.The morphology of all strains were studied and multilocus(ACT,TUB2,CAL,GAPDH,GS,ITS)phylogeny established.Strains were from four important species complexes of Colletotrichum,namely C.gloeosporioides species complex,C.boninense species complex,C.acutatum species complex and a final group including C.truncatum,which was rare on Citrus species.The species belonging to the C.gloeosporioides species complex comprised C.gloeos porioides and C.fructicola,the C.boninense complex comprised C.karstii and a new species C.citricola and the C.acutatum complex included a new species,C.citri.The ability of strains to cause anthracnose on citrus fruits was tested by inoculation and strains of Colletotrichum gloeosporioides,C.fructicola and C.truncatum were pathogenic.
基金the National Natural Science Foundation of China(No.51071061)the Heilongjiang Postdoctoral Subsidies,China(No.LBHZ10199)+1 种基金the Fundamental Research Funds for the Central Universities,China(No.HEUCFR1129)the China Postdoctoral Science Foundation(No.20110491026)for financial support of this research work
文摘Low temperature plasma nitrocarburizing of 17-4PH martensitic stainless steel was conducted at 430 ℃ with and without rare earth （RE） addition. The microstructure, kinetics, microhardness, wear behavior as well as corrosion resistance of the modified layer were studied by optical microscopy, X-ray diffraction, Vickers microhardness tester, pin-on-disc tribometer and potentiodynamic polarization tests. The results show that the thickness of plasma RE nitrocarburized layer is much thicker than that formed by nitrocarburizing without RE addition. The incorporation of RE does not change the kind of the phases and the nitrocarburized layer consists mainly of nitrogen and carbon expanded martensite （aN）, γ-Fe4N and a-Fe with a trace of CrN phases. The surface microhardness of plasma nitrocarburized layer can be increased by 100 HV after RE addition. Wear resistance of the specimen can be apparently improved by low temperature plasma nitrocarburizing with and without RE addition and without sacrificing its corrosion resistance. Wear reduction effect of low temperature plasma nitrocarburizing with RE addition is better than that of the conventional one.
文摘A new search for two-neutrino double-beta(2νββ)decay of^(136)Xe to the 0+1 excited state of 136Ba is performed with the full EXO-200 dataset.A deep learning-based convolutional neural network is used to discriminate signal from background events.Signal detection efficiency is increased relative to previous searches by EXO-200 by more than a factor of two.With the addition of the Phase II dataset taken with an upgraded detector,the median 90%confidence level half-life sensitivity of 2νββdecay to the 0+1 state of 136Ba is 2.9×10^(24)yr using a total^(136)Xe exposure of 234.1 kg yr.No statistically significant evidence for 2νββdecay to the 0^(+)_(1)state is observed,leading to a lower limit of T2ν1/2(0^(+)→0^(+)_(1))>1.4×10^(24)yr at 90%confidence level,improved by 70%relative to the current world's best constraint.
文摘On the basis of the Euler-Bernoulli hypothesis, nonlinear static and dynamic responses of a viscoelastic microbeam under two kinds of electric forces [a purely direct current （DC） and a combined current composed of a DC and an alternating current] are studied. By using Taylor series expansion, a governing equation of nonlinear integro-differential type is derived, and numerical analyses are performed. When a purely DC is applied, there exist an instantaneous pull-in voltage and a durable pull-in voltage of which the physical meanings are also given, whereas under an applied combined current, the effect of the element relaxation coefficient on the dynamic pull-in phenomenon is observed where the largest Lyapunov exponent is taken as a criterion for the dynamic pull-in instability of viscoelastic microbeams.
文摘Based on Timoshenko-Mindlin kinematic hypotheses and Hamilton's principle,a dynamic non-linear theory for general laminated circular cylindrical shells with transverse shear deformation is developed.A multi-mode solution for periodic in- plane loads is formulated for the non-linear dynamic stability of an anti-symmetric angle-ply cylinder with its ends elastically restrained against rotation.The resulted equations in terms of time function are solved by the incremental harmonic balance method.
基金Supported in part by the National Key R&D Program of China(2020YFA0406300,2020YFA0406400)the National Natural Science Foundation of China(NSFC)(11625523,11635010,11735014,11835012,11935015,11935016,11935018,11961141012,12025502,12035009,12035013,12061131003,12105276,12122509,12192260,12192261,12192262,12192263,12192264,12192265,12221005,12225509,12235017)+15 种基金the Chinese Academy of Sciences(CAS)Large-Scale Scientific Facility Programthe CAS Center for Excellence in Particle Physics(CCEPP)Joint Large-Scale Scientific Facility Funds of the NSFC and CAS(U1732263,U1832103,U1832207,U2032111)CAS Key Research Program of Frontier Sciences(QYZDJ-SSW-SLH003,QYZDJ-SSW-SLH040)100 Talents Program of CASThe Institute of Nuclear and Particle Physics(INPAC)and Shanghai Key Laboratory for Particle Physics and CosmologyEuropean Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement(894790)German Research Foundation DFG(455635585),Collaborative Research Center CRC 1044,FOR5327,GRK 2149Istituto Nazionale di Fisica Nucleare,ItalyMinistry of Development of Turkey(DPT2006K-120470)National Research Foundation of Korea(NRF-2022R1A2C1092335)National Science and Technology fund of MongoliaNational Science Research and Innovation Fund(NSRF)via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation of Thailand(B16F640076)Polish National Science Centre(2019/35/O/ST2/02907)The Swedish Research CouncilU.S.Department of Energy(DE-FG02-05ER41374)。
文摘Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η).The fit fractions of individual components are obtained,and large interferences among the dominant components of the decays D^(0)→a_(1)(1260)π,D^(0)→π(1300)π,D^(0)→ρ(770)ρ(770),and D^(0)→2(ππ)_(S)are observed in both channels.With the obtained amplitude model,the CP-even fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are determined to be(75.2±1.1_(stat).±1.5_(syst.))%and(68.9±1.5_(stat).±2.4_(syst.))%,respectively.The branching fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are measured to be(0.688±0.010_(stat.)±0.010_(syst.))%and(0.951±0.025_(stat.)±0.021_(syst.))%,respectively.The amplitude analysis provides an important model for the binning strategy in measuring the strong phase parameters of D^(0)→4πwhen used to determine the CKM angleγ(ϕ_(3))via the B^(−)→DK^(−)decay.
基金supported by the National R&D Program of China (Grant No. 2017YFA0302900)the National Natural Science Foundation of China (Grant Nos. 11774420 and 12134020)+1 种基金the Natural Science Foundation of Hunan Province (Grant No. 851204035)the Fundamental Research Funds for the Central Universities and the Research Funds of Renmin University of China (Grant No. 20XNLG19)
文摘In the context of tensor network states,we for the first time reformulate the corner transfer matrix renormalization group(CTMRG)method into a variational bilevel optimization algorithm.The solution of the optimization problem corresponds to the fixed-point environment pursued in the conventional CTMRG method,from which the partition function of a classical statistical model,represented by an infinite tensor network,can be efficiently evaluated.The validity of this variational idea is demonstrated by the high-precision calculation of the residual entropy of the dimer model,and is further verified by investigating several typical phase transitions in classical spin models,where the obtained critical points and critical exponents all agree with the best known results in literature.Its extension to three-dimensional tensor networks or quantum lattice models is straightforward,as also discussed briefly.
文摘Silicon carbonitride (SiCN) coatings were deposited on silicon and tungsten carbide substrates by co-sputtering silicon and carbon in argon and nitrogen mixture atmosphere using magnetron-sputtering system. The effect of the N2 concentration, RF substrate bias voltage and target current on film deposition rate, roughness, adhesion, mechanical and tribological properties of coatings were investigated. The deposition rate was found to increase with the increasing nitrogen concentration. X-ray photoelectron spectroscopy analysis showed that high nitrogen concentration in the nitrogen-argon gas mixture enhanced the incorporation of C and N but reduced the incorporation of Si. SiCN coatings have good tribological properties at a N2 concentration of approximately 60%.
基金Supported in part by National Key Basic Research Program of China (2015CB856700)National Natural Science Foundation of China (NSFC) (11335008,11425524, 11625523, 11635010, 11735014, 11822506, 11935018)+18 种基金the Chinese Academy of Sciences (CAS) Large-Scale Scientific Facility Programthe CAS Center for Excellence in Particle Physics (CCEPP)Joint Large-Scale Scientific Facility Funds of the NSFC and CAS (U1532257, U1532258, U1732263)CAS Key Research Program of Frontier Science (QYZDJ-SSW-SLH003, QYZDJ-SSW-SLH040)100 Talents Program of CASCAS PIFIthe Thousand Talents Program of ChinaIN-PAC and Shanghai Key Laboratory for Particle Physics and CosmologyGerman Research Foundation DFG under Contracts NosCollaborative Research Center CRC 1044, FOR 2359Istituto Nazionale di Fisica Nucleare, ItalyKoninklijke Nederlandse Akademie van Wetenschappen (KNAW) (530-4CDP03)Ministry of Development of Turkey (DPT2006K-120470)National Science and Technology fundThe Knut and Alice Wallenberg Foundation (Sweden) (2016.0157)The Swedish Research CouncilU. S. Department of Energy (DE-FG02-05ER41374, DESC-0010118, DE-SC-0012069)University of Groningen (Ru G) and the Helmholtzzentrum fuer Schwerionenforschung Gmb H (GSI), Darmstadtthe Russian Ministry of Science and Higher Education (14.W03.31.0026).
文摘There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B factories, and the observation of an intriguing proton-antiproton threshold enhancement and the possibly related X(1835) meson state at BESⅢ, as well as the threshold measurements of charm mesons and charm baryons. We present a detailed survey of the important topics in tau-charm physics and hadron physics that can be further explored at BESⅢ during the remaining operation period of BEPCⅡ. This survey will help in the optimization of the data-taking plan over the coming years, and provides physics motivation for the possible upgrade of BEPCⅡ to higher luminosity.
基金the Meridian Lightweight Technologies Inc., Strathroy, Ontario Canadathe University of Windsor, Windsor, Ontario, Canada for supporting this workpart of a large project funded by Meridian Lightweight Technologies, Inc.
文摘Sludge consisting of heavy element phases and oxides is often generated during the casting operation of aluminum(Al)and magnesium(Mg)alloys.With the help of the well-established Sludge Factor(SF)formula,it is relatively easy to control the sludge generation in aluminum alloys.But formation mechanisms and characteristics of sludge in die casting magnesium alloys are still unclear.To ensure the production of high quality die cast components at a low cost,a full understanding of sludge in die casting Mg alloys and its proper control measures need to be developed,since excessive sludge formation affects deleteriously material and operation cost,and casting performance.In the present report,the formation,characteristics and control of Mg die-casting sludge,based on the established knowledge of sludge formation and sludge factor in Al die casting alloys,are reviewed.Previous work on characterization and assessment of sludge in die cast Mg alloys are reviewed.Metallurgical principles for control of sludge in ingot production in association with die casting of Mg alloys are discussed.Rapid assessment of Mg oxide and intermetallics relevant to sludge formation in Mg alloys are highlighted.
基金Meridian Lightweight Technologies Inc.,Strathroy,Ontario Canadathe University of Windsor,Windsor,Ontario,Canada for supporting this workpart of a large project funded by Meridian Lightweight Technologies,Inc.
文摘Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important issue.But,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die casters.The aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process parameters.The Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn ratio.The design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding time.The sludge yield(SY)and intermetallic size(IS)was selected as two responses.The optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,respectively.The best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,respectively.Three groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg alloys.The CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental data.The Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed easily.The Physical Sludge Factor could be used for mass production with a single type of Mg
基金Supported in part by National Key Basic Research Program of China(2015CB856700)National Natural Science Foundation of China(NSFC)(11235011,11275266,11335008,11425524,11625523,11635010)+16 种基金the Chinese Academy of Sciences(CAS) Large-Scale Scientific Facility Programthe CAS Center for Excellence in Particle Physics(CCEPP)Joint Large-Scale Scientific Facility Funds of the NSFC and CAS(U1332201,U1532257,U1532258)CAS(KJCX2-YW-N29,KJCX2-YW-N45,QYZDJ-SSW-SLH003)100 Talents Program of CASNational 1000 Talents Program of ChinaINPAC and Shanghai Key Laboratory for Particle Physics and CosmologyGerman Research Foundation DFG(Collaborative Research Center CRC 1044,FOR 2359)Istituto Nazionale di Fisica Nucleare,ItalyKoninklijke Nederlandse Akademie van Wetenschappen(KNAW)(530-4CDP03)Ministry of Development of Turkey(DPT2006K-120470)National Science and Technology fundThe Swedish Research CouncilU.S. Department of Energy under(DE-FG02-05ER41374,DE-SC-0010118,DE-SC-0010504,DE-SC-0012069)University of Groningen(RuG)the Helmholtzzentrum fuer Schwerionenforschung GmbH(GSI),DarmstadtWCU Program of National Research Foundation of Korea(R32-2008-000-10155-0)
文摘We study the hadronic decays of ∧c+ to the final states ∑+η and ∑+η’,using an e+e-annihilation data sample of 567 pb-1 taken at a center-of-mass energy of 4.6 GeV with the BESIII detector at the BEPCⅡ collider.We find evidence for the decays ∧c+→∑+η and ∑+η’ with statistical significance of 2.5σ and 3.2σ,respectively.Normalizing to the reference decays ∧c+→∑+π0 and ∑+ω,we obtain the ratios of the branching fractions■and ■to be 0.35±0.16±0.02 and 0.86±0.34±0.04,respectively.The upper limits at the 90% confidence level are set to be■and■.Using BESIII measurements of the branching fractions of the reference decays,we determine B（∧c+→∑+η）=（0.41±0.19±0.05）%（<0.68%）and B（∧c+→∑+η’）=（1.34±0.53 ±0.19）%（<1.9%）.Here,the first uncertainties are statistical and the second systematic.The obtained branching fraction of ∧c+→∑+η is consistent with the previous measurement,and the branching fraction of ∧c+→∑+η’ is measured for the first time.
基金Supported in part by National Key Basic Research Program of China(2015CB856700)National Natural Science Foundation of China(NSFC)(11335008,11425524,11625523,11635010,11735014)+9 种基金the Chinese Academy of Sciences(CAS)Large-Scale Scientific Facility Program,the CAS Center for Excellence in Particle Physics(CCEPP)Joint Large-Scale Scientific Facility Funds of the NSFC and CAS(U1532257,U1532258,U1732263)CAS Key Research Program of Frontier Sciences(QYZDJ-SSW-SLH003,QYZDJ-SSW-SLH040)100 Talents Program of CASINPAC,Shanghai Key Laboratory for Particle Physics and Cosmology,German Research Foundation DFG under Contracts Nos.Collaborative Research Center CRC 1044,FOR 2359Istituto Nazionale di Fisica Nucleare,Italy,Koninklijke Nederlandse Akademie van Wetenschappen(KNAW)(530-4CDP03)Ministry of Development of Turkey(DPT2006K-120470)National Science and Technology fund,The Swedish Research CouncilU.S.Department of Energy(DE-FG02-05ER41374,DE-SC-0010118,DE-SC-0010504,DE-SC-0012069),University of Groningen(RuG)the Helmholtzzentrum fuer Schwerionenforschung GmbH(GSI),Darmstadt
文摘Studies of e^+e~→D_s^+■^((*)0)K^-and the P-wave charmed-strange mesons are performed based on an e^+e^-collision data sample corresponding to an integrated luminosity of 567 pb^(-1) collected with the BESIII detector at s^(1/2)=4.600 GeV. The processes of e^+e^-→D_s^+■^(*0)K^- and D_s^+■~0K^- are observed for the first time and are found to be dominated by the modes D_s^+D_(s1)(2536)^-and D_s^+D_(s2)~*(2573)^-, respectively. The Born cross sections are measured to be σ~B(e^+e^-→D_s^+■^(*0)K^-) =(10.1±2.3±0.8) pb and σ~B(e^+e^-→D_s^+■~0K^-) =(19.4±2.3± 1.6) pb, and the products of Born cross section and the decay branching fraction are measured to be σ~B(e^+e^-→D_s^+D_(s1)(2536)^-+c.c.)·B(D_(s1)(2536)^-→■^(*0)K^-)=(7.5±1.8±0.7) pb and σ~B(e^+e^-→D_s^+D_(s2)~*(2573)^-+ c.c.)·B(D_(s2)~*(2573)^-→■~0 K^-)=(19.7 ± 2.9 ±2.0) pb. For the D_(s1)(2536)^-and D_(s2)~*(2573)^-mesons, the masses and widths are measured to be M(D_(s1)(2536)^-)=(2537.7±0.5 ±3.1) MeV/c2, Γ(D_(s1)(2536)^-) =(1.7 ±1.2 ±0.6)MeV, and M(D_(s2)~*(2573)^-)=(2570.7±2.0 ±1.7) MeV/c^2, Γ(D_(s2)~*(2573)^-)=(17.2 ±3.6 ±1.1) MeV. The spin-parity of the D_(s2)~*(2573)^-meson is determined to be J^p= 2^+. In addition, the processes e^+e^-→D_s^+■^((*)0)K^-are searched for using the data samples taken at four(two) center-of-mass energies between 4.416(4.527) and 4.575 GeV, and upper limits at the 90% confidence level on the cross sections are determined.
文摘Photocatalytic degradations of p-nitrochlorbenzene (p-NCB) with distilled water wereinvestigated with ZnO crystals (catalyst) of 70nm in diameter under UV irradiation.The suitable experimental conditions are determined as: ZnO 0.25g, pH 7, p-NCBconcentration 30mg/L. These variables in terms of the degradation rate have beendiscussed, which was defined as the rate of the initial degradation to the final degrada-tion of p-NCB. When all of the experimental degradation rate values are plotted as afunction of irradiation time, all of the points appeared on a single line for wide range ofp-NCB degradations. On the basis of these results, it has been concluded that at lowerZnO catalyst amount, much of the light is transmitted through the slurry in the con-tainer beaker, while at higher catalyst amount, all the incident photons are observedby the slurry. Degradation rates of p-NCB were found to decrease with increasingsolution pH. It has been concluded that the maximum degradation rate values of p-NCB under principally the same experimental conditions mentioned above are 97.4%,98.8% and 95.5% at 100min respectively. The results suggest that the photocatalyticdegradation is initiated by an oxidation of the p-NCB through ZnO surface-adsorbedhydroxyl radicals. Absorption spectra are recorded using spectrophotometer before andafter UV-irradiation in the wavelength range 200-400nm at room temperature. Itis found that the variation of irradiation time over the range 20-100min resulted inchange in the form of the spectrum linear absorption and a higher maximum valuewill be obtained at longer irradiation time.
文摘In ordertoimprovethe dischargecapacity of Ti2 Ni hydrogen storage alloy, the phases and effecton the property for Ti Nialloy with alittle La( La contentisbetween 5 25 wt% and12 62 wt%) were investigated in this paper. It is found that La exists in the form ofLaNi5 ,thesecond phase,in Ti Nialloy when La> 8 wt% . LaNi5 phasecaneffectivelyim provethe activity property and discharge capacity of Ti Ni alloy. While the soluble Ti inmain phase Ti2 Niisadverseto hydrogen adsorption desorption cycle and itshould be dimin ished .
文摘Nanometer Zn particles with mean diameters 12-100nm made by evaporating its powders in argon gas were studied mainly by X-ray diffraction and electron microscopy. They are collected at various distances and those factors influencing the mean particle size were studied. The optimal synthetic conditions were obtained, i.e., evaporation temperature is 1200℃; argon flow rate is 0.4m3/h; amount of powder charged is 3g; distance from evaporation source is 10cm. It was found that the size of particles was governed by argon flow rate, evaporation temperature, amount of metal charged and distance from the source. The size increases remarkably with distance in the space where no metal vapor exists. This implies that the crystallites grow by coalescence. Electron micrographs and diffraction patterns are reproduced to show the size, shape and state of oxidations. Nanoparticles with definite crystal habits were sometimes observed among those with irregular ones.
文摘A reduced surface electric field in an AlGaN/GaN high electron mobility transistor （HEMT） is investigated by employing a localized Mg-doped layer under the two-dimensional electron gas （2-DEG） channel as an electric field shaping layer. The electric field strength around the gate edge is effectively relieved and the surface electric field is distributed evenly as compared with those of HEMTs with conventional source-connected field plate and double field plate structures with the same device physical dimensions. Compared with the HEMTs with conventional sourceconnected field plates and double field plates, the HEMT with a Mg-doped layer also shows that the breakdown location shifts from the surface of the gate edge to the bulk Mg-doped layer edge. By optimizing both the length of Mg-doped layer, Lm, and the doping concentration, a 5.5 times and 3 times the reduction in the peak electric field near the drain side gate edge is observed as compared with those of the HEMTs with source-connected field plate structure and double field plate structure, respectively. In a device with VGS = -5 V, Lm 1.5 m, a peak Mg doping concentration of 8×10^17 cm-3 and a drift region length of 10 m, the breakdown voltage is observed to increase from 560 V in a conventional device without field plate structure to over 900 V without any area overhead penalty.
