The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of...The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or higher.The STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard Model.The STCF project in China is under development with an extensive R&D program.This document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&D and physics case studies.展开更多
<001>textured Pb(Ni_(1/3)Nb_(2/3))O_(3)-PbZrO_(3)-PbTiO_(3)(PNN-PZT)ceramics were prepared by templated grain growth(TGG)technique using 0.36PNN-x PZ-(0.64-x)PT(x=0.23,0.25 and 0.27)powder matrix.Optimum templat...<001>textured Pb(Ni_(1/3)Nb_(2/3))O_(3)-PbZrO_(3)-PbTiO_(3)(PNN-PZT)ceramics were prepared by templated grain growth(TGG)technique using 0.36PNN-x PZ-(0.64-x)PT(x=0.23,0.25 and 0.27)powder matrix.Optimum template content was derived to achieve the best electromechanical properties of textured ceramics.The piezoelectric coefficient d33=1165 pC/N,Curie temperature T_(C)=197℃,longitudinal mode electrome-chanical coupling factor k33=0.86 and a very large effective piezoelectric strain coefficient d_(33)^(*)=2041 pm/V were simultaneously achieved at the morphotropic phase boundary(MPB)composition(x=0.25)with 3 vol.%BaTiO_(3)(BT)templates.Domain structures of textured ceramics were analyzed in detail to reveal the origin of these high piezoelectric and electromechanical properties.展开更多
The microstructure of 40Cr steel sample and its surface is ultra-fined through salt-bath cyclic quenching and high frequency hardening, then the superplasticity is studied under isothermal superplastic compressive def...The microstructure of 40Cr steel sample and its surface is ultra-fined through salt-bath cyclic quenching and high frequency hardening, then the superplasticity is studied under isothermal superplastic compressive deformation condition. The experimental results indicate that the stress-strain curves are shown to take place obvious superplastic flow characteristic at the temperature of 750-770℃ and at the initial strain rate of (1.7-5.0)×10-4 s-1. Its strain rate sensitivity is 0.30-0.38, the steady superplastic flow stress is 60-70MPa, the superplastic flow activation energy is 198-217kJ/mol, and it is close to α-Fe grain boundary self-diffusion activation energy. The super-plastic compressive constitute equations of this steel are correspondingly set up. Due to the finer microstructure of high frequency hardening, it appears bigger strain rate sensitivity value, smaller the steady superplastic flow stress and the superplastic flow activation energy, so it has better superplastic deformation capability.展开更多
The formation of Fe-N compounds by laser nitriding in an atmospheric ambient was reported. By CW-CO2 laser irradiation on pure ferrite iron in the atmospheric ambient, Fe-N compounds (including Fe2N, .Fe3AT and Fe4N) ...The formation of Fe-N compounds by laser nitriding in an atmospheric ambient was reported. By CW-CO2 laser irradiation on pure ferrite iron in the atmospheric ambient, Fe-N compounds (including Fe2N, .Fe3AT and Fe4N) are formed as a result of a laser-enhanced and temperature-enhanced reactions. The samples were analyzed with X-ray diffraction. It is found that the laser power density, scanning speed and nitrogen temperature are the main factors influencing the formation of Fe-N compounds. Nitrogen can be activated by pre-heating at some temperature. Nitrogen activation and sample surface melting by CW-CO2 laser greatly enhance the reaction between the sample surface and nitrogen beam. After annealing at 500℃for 3h, some Fe2N and Fe3N converted into more stable Fe4N.展开更多
基金supported by the National Key R&D Program of China under Contract No.2022YFA1602200the International Partnership Program of the Chineses Academy of Sciences under Grant No.211134KYSB20200057the STCF Key Technology Research and Development Project.
文摘The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or higher.The STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard Model.The STCF project in China is under development with an extensive R&D program.This document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&D and physics case studies.
基金supported in part by the Natural Science Foun-dation of Heilongjiang Province(No.LH2022E048)Postdoctoral Science Foundation of Heilongjiang Province(No.LBH-Z22138)China National Postdoctoral Program for Innovative Talents(No.BX20490103).
文摘<001>textured Pb(Ni_(1/3)Nb_(2/3))O_(3)-PbZrO_(3)-PbTiO_(3)(PNN-PZT)ceramics were prepared by templated grain growth(TGG)technique using 0.36PNN-x PZ-(0.64-x)PT(x=0.23,0.25 and 0.27)powder matrix.Optimum template content was derived to achieve the best electromechanical properties of textured ceramics.The piezoelectric coefficient d33=1165 pC/N,Curie temperature T_(C)=197℃,longitudinal mode electrome-chanical coupling factor k33=0.86 and a very large effective piezoelectric strain coefficient d_(33)^(*)=2041 pm/V were simultaneously achieved at the morphotropic phase boundary(MPB)composition(x=0.25)with 3 vol.%BaTiO_(3)(BT)templates.Domain structures of textured ceramics were analyzed in detail to reveal the origin of these high piezoelectric and electromechanical properties.
基金supported by State Key Laboratory of New Nonferrous Metal Materials Natural Science Foundation of He'nan Province,China(No.984040900)Natural Science Foundation of the Education Department of He'nan Province,China(No.2003430211).
文摘The microstructure of 40Cr steel sample and its surface is ultra-fined through salt-bath cyclic quenching and high frequency hardening, then the superplasticity is studied under isothermal superplastic compressive deformation condition. The experimental results indicate that the stress-strain curves are shown to take place obvious superplastic flow characteristic at the temperature of 750-770℃ and at the initial strain rate of (1.7-5.0)×10-4 s-1. Its strain rate sensitivity is 0.30-0.38, the steady superplastic flow stress is 60-70MPa, the superplastic flow activation energy is 198-217kJ/mol, and it is close to α-Fe grain boundary self-diffusion activation energy. The super-plastic compressive constitute equations of this steel are correspondingly set up. Due to the finer microstructure of high frequency hardening, it appears bigger strain rate sensitivity value, smaller the steady superplastic flow stress and the superplastic flow activation energy, so it has better superplastic deformation capability.
文摘The formation of Fe-N compounds by laser nitriding in an atmospheric ambient was reported. By CW-CO2 laser irradiation on pure ferrite iron in the atmospheric ambient, Fe-N compounds (including Fe2N, .Fe3AT and Fe4N) are formed as a result of a laser-enhanced and temperature-enhanced reactions. The samples were analyzed with X-ray diffraction. It is found that the laser power density, scanning speed and nitrogen temperature are the main factors influencing the formation of Fe-N compounds. Nitrogen can be activated by pre-heating at some temperature. Nitrogen activation and sample surface melting by CW-CO2 laser greatly enhance the reaction between the sample surface and nitrogen beam. After annealing at 500℃for 3h, some Fe2N and Fe3N converted into more stable Fe4N.
