The directionally solidified samples of an ultra-high temperature Nb-Si-Ti-Hf-Cr-Al alloy have been prepared with the use of an electron beam floating zone melting (EBFZM) furnace, and their microstructural characteri...The directionally solidified samples of an ultra-high temperature Nb-Si-Ti-Hf-Cr-Al alloy have been prepared with the use of an electron beam floating zone melting (EBFZM) furnace, and their microstructural characteristics have been analyzed. All the primary dendrites of Nb solid solution (Nbss), eutectic colonies of Nba, plus (Nb, Ti)3 Si/(Nb, Ti)5 Si3 and chains of (Nb, Ti)3 Si/(Nb, Ti)5 Si3 plates align along the growth direction of the samples. With increasing of the withdrawing rate, the microstructure is refined, and the amounts of Nbss+ (Nb, Ti)3 Si/(Nb, Ti)5 Si3 eutectic colonies and (Nb, Ti)3 Si/(Nb, Ti)5 Si3 plates increase. There appear nodes in the (Nb, Ti)3 Si/(Nb, Ti)5 Si3 plates.展开更多
This note addresses diagnosis and performance degradation detection issues from an integrated viewpoint of functionality maintenance and cyber security of automatic control systems.It calls for more research attention...This note addresses diagnosis and performance degradation detection issues from an integrated viewpoint of functionality maintenance and cyber security of automatic control systems.It calls for more research attention on three aspects:(i)application of control and detection uni ed framework to enhancing the diagnosis capability of feedback control systems,(ii)projection-based fault detection,and complementary and explainable applications of projection-and machine learning-based techniques,and(iii)system performance degradation detection that is of elemental importance for today's automatic control systems.Some ideas and conceptual schemes are presented and illustrated by means of examples,serving as convincing arguments for research e orts in these aspects.They would contribute to the future development of capable diagnosis systems for functionality safe and cyber secure automatic control systems.展开更多
MHD stability of the Large Helical Device (LHD) plasmas produced with intenseneutral beam injection is experimentally studied. When the steep pressure gradient near the edge isproduced through L-H transition or linear...MHD stability of the Large Helical Device (LHD) plasmas produced with intenseneutral beam injection is experimentally studied. When the steep pressure gradient near the edge isproduced through L-H transition or linear density ramp experiment, interchange-like MHD modes whoserational surface is located very close to the last closed flux surface are strongly excited in acertain discharge condition and affect the plasma transport appreciably. In NBI-heated plasmasproduced at low toroidal field, various Alfven eigenmodes are often excited. Bursting toroidalAlfven egenmodes excited by the presence of energetic ions induce appreciable amount of energeticion loss, but also trigger the formation of internal and edge transport barriers.展开更多
Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays...Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η).The fit fractions of individual components are obtained,and large interferences among the dominant components of the decays D^(0)→a_(1)(1260)π,D^(0)→π(1300)π,D^(0)→ρ(770)ρ(770),and D^(0)→2(ππ)_(S)are observed in both channels.With the obtained amplitude model,the CP-even fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are determined to be(75.2±1.1_(stat).±1.5_(syst.))%and(68.9±1.5_(stat).±2.4_(syst.))%,respectively.The branching fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are measured to be(0.688±0.010_(stat.)±0.010_(syst.))%and(0.951±0.025_(stat.)±0.021_(syst.))%,respectively.The amplitude analysis provides an important model for the binning strategy in measuring the strong phase parameters of D^(0)→4πwhen used to determine the CKM angleγ(ϕ_(3))via the B^(−)→DK^(−)decay.展开更多
Ceramic matrix composites consisting of an alumina matrix containing 20 vol% nickel particles has been fabricated using hot pressing technique. It is found that fracture toughness of the composite is much higher than ...Ceramic matrix composites consisting of an alumina matrix containing 20 vol% nickel particles has been fabricated using hot pressing technique. It is found that fracture toughness of the composite is much higher than the alumina matrix. This is due to the energy dissipation of the nickel particles that bridge the propagating cracks.展开更多
Titanium (Ti) and hydroxyapatite (HA) coatings have been prepared via air (APS) and vacuum plasma spraying (VPS), and then their composition, structure, bonding strength and bioactivity were examined. The results obta...Titanium (Ti) and hydroxyapatite (HA) coatings have been prepared via air (APS) and vacuum plasma spraying (VPS), and then their composition, structure, bonding strength and bioactivity were examined. The results obtained reveal that in APS process many of Ti were oxidized, but in VPS the oxidization was avoided. VPS T i coating possesses better bonding condition than APS Ti coating. As for HA coat ing, higher crystallinity has been obtained while the coating was deposited by V PS as compared with APS. The simulated body fluid (SBF) tests show that both of APS and VPS HA coatings possess good bioactivity. As compared with APS, VPS is r ecommended as a better method to deposit Ti and HA coatings that can be applied as hard tissue replacement implants.展开更多
The article uses the method of regression statistics to obtain the regression formula of iron fluid nodule ratio Q and compacted graphite ratio R, through rare earth magnesium treatment. At the same time it has given ...The article uses the method of regression statistics to obtain the regression formula of iron fluid nodule ratio Q and compacted graphite ratio R, through rare earth magnesium treatment. At the same time it has given thejudging figure of Q and R, considering oxygen activity and temperature. When using oxygen activity to judgenodule ratio and compacted graphite ratio of the ironfluid treated by rare earth magnesium alloy, its limit value changes with the change of temperature.展开更多
The research is carried out through specification measurement of magnetic property, photo analysis of electronic microscope, metallographic analysis, micro hard and so on means. The initial researches have been d...The research is carried out through specification measurement of magnetic property, photo analysis of electronic microscope, metallographic analysis, micro hard and so on means. The initial researches have been done about the influence on material property by solid solution treatment, heat magnetic treatment and aging treatment technology of the low cobalt Fe Cr Co alloy. Therefore, better productive technologies have been found.展开更多
Solid solution strengthening(SSS)is one kind of strengthening mechanisms and plays an important role in alloy design,in particular for single-phase alloys including high-entropy alloys(HEAs).The classical Labusch–Nab...Solid solution strengthening(SSS)is one kind of strengthening mechanisms and plays an important role in alloy design,in particular for single-phase alloys including high-entropy alloys(HEAs).The classical Labusch–Nabarro model and its expansions are most widely applicable to treating SSS of solid solution alloys including both conventional alloys(CAs)and HEAs.In this study,the SSS effects in a series of Febased CAs and HEAs are investigated by using the classical Labusch–Nabarro model and its expansions.The size misfit and shear modulus misfit parameters are derived from first-principles calculations.Based on available experimental data in combination with empirical SSS model,we propose fitting constants(i.e.,the ratio between experimental hardness and predicted SSS effect)for these two families of alloys.The predicted host/alloy family-dependent fitting constants can be used to estimate the hardness of these SSS alloys.General agreement between predicted and measured hardness values is satisfactory for both CAs and HEAs,implying that the proposed approach is reliable and successful.展开更多
Grain-boundary(GB)precipitation has a significant adverse effect on plasticity of alloys,which easily leads to catastrophic intergranular failure in safety-critical applications under high external loading.Herein,we r...Grain-boundary(GB)precipitation has a significant adverse effect on plasticity of alloys,which easily leads to catastrophic intergranular failure in safety-critical applications under high external loading.Herein,we report a novel strategy that uses the local stress concentration induced by GB precipitates as a driving force to trigger phase transformation of preset non-equiatomic high-entropy solid-solution phase at GBs.This in situ deformation-induced phase transformation at GBs introduces a well-known effect:transformation-induced plasticity(TRIP),which enables an exceptional elongation to fracture(above 38%)at a high strength(above 1.5 GPa)in a GB precipitation-hardened high-entropy alloy(HEA).The present strategy in terms of"local stress concentration-induced phase transformations at GBs"may provide a fundamental approach by taking advantage of(rather than avoiding)the GB precipitation to gain a superior combination of high strength and high ductility in HEAs.展开更多
The corrosion behavior of type 1045（AISI） carbon steel（CS） in oil-water fluids was investigated by considering the surface wetting state as the breakthrough point.The surface water wetting percentage（SWWP）and co...The corrosion behavior of type 1045（AISI） carbon steel（CS） in oil-water fluids was investigated by considering the surface wetting state as the breakthrough point.The surface water wetting percentage（SWWP）and corrosion weight loss of CS in different oil-water fluids were measured.The morphology and composition of the corrosion films were detected via scanning electron microscopy,electron-probe facescanning technology and Fourier-transform infrared spectroscopy.The results indicated that the corrosion weight loss of CS in the oil-water fluids corresponded with SWWP and that the corrosion process was influenced by the participation of oil.展开更多
基金supported by the National Natural Science Foundation of China(No.50271056)National High Technical Research and Development Programme of China(No.2003AA305810)the Special Research Fund for Doctoral Disciplines in Colleges and Universities of M.0.E,China(No.20020699025).
文摘The directionally solidified samples of an ultra-high temperature Nb-Si-Ti-Hf-Cr-Al alloy have been prepared with the use of an electron beam floating zone melting (EBFZM) furnace, and their microstructural characteristics have been analyzed. All the primary dendrites of Nb solid solution (Nbss), eutectic colonies of Nba, plus (Nb, Ti)3 Si/(Nb, Ti)5 Si3 and chains of (Nb, Ti)3 Si/(Nb, Ti)5 Si3 plates align along the growth direction of the samples. With increasing of the withdrawing rate, the microstructure is refined, and the amounts of Nbss+ (Nb, Ti)3 Si/(Nb, Ti)5 Si3 eutectic colonies and (Nb, Ti)3 Si/(Nb, Ti)5 Si3 plates increase. There appear nodes in the (Nb, Ti)3 Si/(Nb, Ti)5 Si3 plates.
文摘This note addresses diagnosis and performance degradation detection issues from an integrated viewpoint of functionality maintenance and cyber security of automatic control systems.It calls for more research attention on three aspects:(i)application of control and detection uni ed framework to enhancing the diagnosis capability of feedback control systems,(ii)projection-based fault detection,and complementary and explainable applications of projection-and machine learning-based techniques,and(iii)system performance degradation detection that is of elemental importance for today's automatic control systems.Some ideas and conceptual schemes are presented and illustrated by means of examples,serving as convincing arguments for research e orts in these aspects.They would contribute to the future development of capable diagnosis systems for functionality safe and cyber secure automatic control systems.
基金The project supported by the Core-University Program between Japan and China on Plasmas and Nuclear Fusion, and a Grant-in-Aid for Scientific Research from Japan Society for the Promotion of Science
文摘MHD stability of the Large Helical Device (LHD) plasmas produced with intenseneutral beam injection is experimentally studied. When the steep pressure gradient near the edge isproduced through L-H transition or linear density ramp experiment, interchange-like MHD modes whoserational surface is located very close to the last closed flux surface are strongly excited in acertain discharge condition and affect the plasma transport appreciably. In NBI-heated plasmasproduced at low toroidal field, various Alfven eigenmodes are often excited. Bursting toroidalAlfven egenmodes excited by the presence of energetic ions induce appreciable amount of energeticion loss, but also trigger the formation of internal and edge transport barriers.
基金Supported in part by the National Key R&D Program of China(2020YFA0406300,2020YFA0406400)the National Natural Science Foundation of China(NSFC)(11625523,11635010,11735014,11835012,11935015,11935016,11935018,11961141012,12025502,12035009,12035013,12061131003,12105276,12122509,12192260,12192261,12192262,12192263,12192264,12192265,12221005,12225509,12235017)+15 种基金the Chinese Academy of Sciences(CAS)Large-Scale Scientific Facility Programthe CAS Center for Excellence in Particle Physics(CCEPP)Joint Large-Scale Scientific Facility Funds of the NSFC and CAS(U1732263,U1832103,U1832207,U2032111)CAS Key Research Program of Frontier Sciences(QYZDJ-SSW-SLH003,QYZDJ-SSW-SLH040)100 Talents Program of CASThe Institute of Nuclear and Particle Physics(INPAC)and Shanghai Key Laboratory for Particle Physics and CosmologyEuropean Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement(894790)German Research Foundation DFG(455635585),Collaborative Research Center CRC 1044,FOR5327,GRK 2149Istituto Nazionale di Fisica Nucleare,ItalyMinistry of Development of Turkey(DPT2006K-120470)National Research Foundation of Korea(NRF-2022R1A2C1092335)National Science and Technology fund of MongoliaNational Science Research and Innovation Fund(NSRF)via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation of Thailand(B16F640076)Polish National Science Centre(2019/35/O/ST2/02907)The Swedish Research CouncilU.S.Department of Energy(DE-FG02-05ER41374)。
文摘Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η).The fit fractions of individual components are obtained,and large interferences among the dominant components of the decays D^(0)→a_(1)(1260)π,D^(0)→π(1300)π,D^(0)→ρ(770)ρ(770),and D^(0)→2(ππ)_(S)are observed in both channels.With the obtained amplitude model,the CP-even fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are determined to be(75.2±1.1_(stat).±1.5_(syst.))%and(68.9±1.5_(stat).±2.4_(syst.))%,respectively.The branching fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are measured to be(0.688±0.010_(stat.)±0.010_(syst.))%and(0.951±0.025_(stat.)±0.021_(syst.))%,respectively.The amplitude analysis provides an important model for the binning strategy in measuring the strong phase parameters of D^(0)→4πwhen used to determine the CKM angleγ(ϕ_(3))via the B^(−)→DK^(−)decay.
文摘Ceramic matrix composites consisting of an alumina matrix containing 20 vol% nickel particles has been fabricated using hot pressing technique. It is found that fracture toughness of the composite is much higher than the alumina matrix. This is due to the energy dissipation of the nickel particles that bridge the propagating cracks.
基金This work was suppored by the National Natural Science Foundution of China(No.50102008)Shanghai Science and Technology R&D Fund(No.03JC14074 and No.035211081).
文摘Titanium (Ti) and hydroxyapatite (HA) coatings have been prepared via air (APS) and vacuum plasma spraying (VPS), and then their composition, structure, bonding strength and bioactivity were examined. The results obtained reveal that in APS process many of Ti were oxidized, but in VPS the oxidization was avoided. VPS T i coating possesses better bonding condition than APS Ti coating. As for HA coat ing, higher crystallinity has been obtained while the coating was deposited by V PS as compared with APS. The simulated body fluid (SBF) tests show that both of APS and VPS HA coatings possess good bioactivity. As compared with APS, VPS is r ecommended as a better method to deposit Ti and HA coatings that can be applied as hard tissue replacement implants.
文摘The article uses the method of regression statistics to obtain the regression formula of iron fluid nodule ratio Q and compacted graphite ratio R, through rare earth magnesium treatment. At the same time it has given thejudging figure of Q and R, considering oxygen activity and temperature. When using oxygen activity to judgenodule ratio and compacted graphite ratio of the ironfluid treated by rare earth magnesium alloy, its limit value changes with the change of temperature.
文摘The research is carried out through specification measurement of magnetic property, photo analysis of electronic microscope, metallographic analysis, micro hard and so on means. The initial researches have been done about the influence on material property by solid solution treatment, heat magnetic treatment and aging treatment technology of the low cobalt Fe Cr Co alloy. Therefore, better productive technologies have been found.
基金The National Natural Science Foundation of China(No.51871175)Opening Project of Key Laboratory of Shaanxi Province for Craniofacial Precision Medicine Research,College of Stomatology,Xi’an Jiaotong University(No.2021LHM-KFKT005)+2 种基金the Innovation Fund of Materials Research of the Chinese Academy of Engineering Physics(No.CX201909)Fund of Key Laboratory of Surface Physics and Chemistry(No.XKFZ201902)are acknowledged for financial supportthe financial support of the US AFOSR(No.FA9550-20-1-0015)。
文摘Solid solution strengthening(SSS)is one kind of strengthening mechanisms and plays an important role in alloy design,in particular for single-phase alloys including high-entropy alloys(HEAs).The classical Labusch–Nabarro model and its expansions are most widely applicable to treating SSS of solid solution alloys including both conventional alloys(CAs)and HEAs.In this study,the SSS effects in a series of Febased CAs and HEAs are investigated by using the classical Labusch–Nabarro model and its expansions.The size misfit and shear modulus misfit parameters are derived from first-principles calculations.Based on available experimental data in combination with empirical SSS model,we propose fitting constants(i.e.,the ratio between experimental hardness and predicted SSS effect)for these two families of alloys.The predicted host/alloy family-dependent fitting constants can be used to estimate the hardness of these SSS alloys.General agreement between predicted and measured hardness values is satisfactory for both CAs and HEAs,implying that the proposed approach is reliable and successful.
基金supported financially by the National Natural Science Foundation of China(No.51871178)。
文摘Grain-boundary(GB)precipitation has a significant adverse effect on plasticity of alloys,which easily leads to catastrophic intergranular failure in safety-critical applications under high external loading.Herein,we report a novel strategy that uses the local stress concentration induced by GB precipitates as a driving force to trigger phase transformation of preset non-equiatomic high-entropy solid-solution phase at GBs.This in situ deformation-induced phase transformation at GBs introduces a well-known effect:transformation-induced plasticity(TRIP),which enables an exceptional elongation to fracture(above 38%)at a high strength(above 1.5 GPa)in a GB precipitation-hardened high-entropy alloy(HEA).The present strategy in terms of"local stress concentration-induced phase transformations at GBs"may provide a fundamental approach by taking advantage of(rather than avoiding)the GB precipitation to gain a superior combination of high strength and high ductility in HEAs.
基金supported by the National Natural Science Foundation of China (No.51041007)the Tribology Science Fund of State Key Laboratory of Tribology (No.SKLTKF10B07)
文摘The corrosion behavior of type 1045（AISI） carbon steel（CS） in oil-water fluids was investigated by considering the surface wetting state as the breakthrough point.The surface water wetting percentage（SWWP）and corrosion weight loss of CS in different oil-water fluids were measured.The morphology and composition of the corrosion films were detected via scanning electron microscopy,electron-probe facescanning technology and Fourier-transform infrared spectroscopy.The results indicated that the corrosion weight loss of CS in the oil-water fluids corresponded with SWWP and that the corrosion process was influenced by the participation of oil.
