AA2219 aluminium alloy square butt joints without filler metal addition were fabricated using gas tungsten arc welding （GTAW）, electron beam welding （EBW） and friction stir welding （FSW） processes. The effects o...AA2219 aluminium alloy square butt joints without filler metal addition were fabricated using gas tungsten arc welding （GTAW）, electron beam welding （EBW） and friction stir welding （FSW） processes. The effects of three welding processes on the tensile, fatigue and corrosion behaviour were studied. Microstructure analysis was carried out using optical and electron microscopes. The results show that the FSW joints exhibit superior tensile and fatigue properties compared to EBW and GTAW joints. It is also found that the friction stir welds show lower corrosion resistance than EB and GTA welds. This is mainly due to the presence of finer grains and uniform distribution of strengthening precipitates in the weld metal of FSW joints.展开更多
Agricultural environments deteriorate due to excess nitrogen application. Breeding for low nitrogen responsive genotypes can reduce soil nitrogen input. Rice genotypes respond variably to soil available nitrogen. The ...Agricultural environments deteriorate due to excess nitrogen application. Breeding for low nitrogen responsive genotypes can reduce soil nitrogen input. Rice genotypes respond variably to soil available nitrogen. The present study attempted quantification of genotype x nitrogen level interaction and mapping of quantitative trait loci （QTLs） associated with nitrogen use efficiency （NUE） and other associated agronomic traits. Twelve parameters were observed across a set of 82 double haploid （DH） lines derived from IR64/Azucena. Three nitrogen regimes namely, native （0 kg/ha; no nitrogen applied）, optimum （100 kg/ha） and high （200 kg/ha） replicated thrice were the environments. The parents and DH lines were significantly varying for all traits under different nitrogen regimes. All traits except plant height recorded significant genotype × environment interaction. Individual plant yield was positively correlated with nitrogen use efficiency and nitrogen uptake. Sixteen QTLs were detected by composite interval mapping. Eleven QTLs showed significant QTL × environment interactions. On chromosome 3, seven QTLs were detected associated with nitrogen use, plant yield and associated traits. A QTL region between markers RZ678, RZ574 and RZ284 was associated with nitrogen use and yield. This chromosomal region was enriched with expressed gene sequences of known key nitrogen assimilation genes.展开更多
Joining of dissimilar metals will offer many advantages in transportation sectors such as fuel consumption,weightreduction and emission reduction.However,joining of aluminium(Al)alloys with magnesium(Mg)alloys by fusi...Joining of dissimilar metals will offer many advantages in transportation sectors such as fuel consumption,weightreduction and emission reduction.However,joining of aluminium(Al)alloys with magnesium(Mg)alloys by fusion welding processis very complicated.Friction stir welding(FSW)is a feasible method to join these two dissimilar alloys.Mixing these two metalstogether in stir zone(SZ)leads to poor corrosion resistance.In this investigation,an attempt has been made to understand thecorrosion resistance of SZ of FSWed dissimilar joints of AA6061Al alloy and AZ31B Mg alloy.Potentiodynamic polarization testwas conducted by varying chloride ion concentration,pH value of the NaCl solution and exposure time.The corroded surfaces wereanalyzed using optical microscopy,scanning electron microscopy and XRD techniques.Of these three factors investigated,exposuretime is found to be the most significant factor to influence the corrosion behaviour of SZ of friction stir welded dissimilar joints ofAl/Mg alloys.展开更多
Naval grade high strength low alloy(HSLA) steels can be easily welded by all types of fusion welding processes. However, fusion welding of these steels leads to the problems such as cold cracking, residual stress, dis...Naval grade high strength low alloy(HSLA) steels can be easily welded by all types of fusion welding processes. However, fusion welding of these steels leads to the problems such as cold cracking, residual stress, distortion and fatigue damage. These problems can be eliminated by solid state welding process such as friction stir welding(FSW). In this investigation, a comparative evaluation of mechanical(tensile, impact,hardness) properties and microstructural features of shielded metal arc(SMA), gas metal arc(GMA) and friction stir welded(FSW) naval grade HSLA steel joints was carried out. It was found that the use of FSW process eliminated the problems related to fusion welding processes and also resulted in the superior mechanical properties compared to GMA and SMA welded joints.展开更多
The nesting behaviour of sea turtles remains a subject to study, due to their enigmatic pattern of seasonal breeding activities. Over a period of time, several reports have been made in this context associated with th...The nesting behaviour of sea turtles remains a subject to study, due to their enigmatic pattern of seasonal breeding activities. Over a period of time, several reports have been made in this context associated with the nesting behaviour of the Olive Ridley turtles. In the present study, characteristics of the breeding beach and nesting pattern of Olive Ridley (Lepidochelys olivacea) at Ramnagar along N-E coast of Andaman Islands were investigated, during the nesting periods 2016-2017. The study area hosts Olive Ridley, the dominant sea turtles with more than 300 individuals nesting each year. For this study, the number of sea turtles visited, nested, the sediment characters, salinity, and temperature were taken. The exposed sandy nesting beach characteristics are prone to varying degrees of morphological changes every day. The results depict that even though similar grain size (Coarse Sand to Fine Sand and Very well sorted to Poorly Sorted), with an ambient incubating temperature, pH and salinity with wide nesting area, the selective nesting in the particular location of the beach identified because of comfortable energy conditions in the waters (1.5 m/s) favours the female turtles to reach the beach at the preferable site of Ramnagar and nest.展开更多
Nesting behaviour of sea turtles remains a subject to study, due to their enigmatic pattern of seasonal breeding activities. In the present study, characteristics of the breeding turtle, Olive Ridley (Lepidochely...Nesting behaviour of sea turtles remains a subject to study, due to their enigmatic pattern of seasonal breeding activities. In the present study, characteristics of the breeding turtle, Olive Ridley (Lepidochelys olivacea) at Ramnagar along N-E coast of North Andaman Islands were investigated, for the nesting periods 2016-2017. Olive Ridley is the dominant sea turtles, with more than 300 individuals nesting every season with at least a 75% hatching success rate. It is one of the conducive, highly protective and undisturbed nesting sites for Olive Ridley on North Andaman coast. In the present study an initiative is made, to identify nature’s cues and the biological characteristics of Olive Ridley, which leads it to nest at Ramnagar beach, with a high hatchling success rate.展开更多
Friction stir welding(FSW) is a promising welding process that can join age hardenable aluminium alloys with high joint efficiency. However,the thermal cycles experienced by the material to be joined during FSW result...Friction stir welding(FSW) is a promising welding process that can join age hardenable aluminium alloys with high joint efficiency. However,the thermal cycles experienced by the material to be joined during FSW resulted in the deterioration of mechanical properties due to the coarsening and dissolution of strengthening precipitates in the thermo-mechanical affected zone(TMAZ) and heat affected zone(HAZ). Under water friction stir welding(UWFSW) is a variant of FSW process which can maintain low heat input as well as constant heat input along the weld line. The heat conduction and dissipation during UWFSW controls the width of TMAZ and HAZ and also improves the joint properties. In this investigation, an attempt has been made to evaluate the mechanical properties and microstructural characteristics of AA2519-T87 aluminium alloy joints made by FSW and UWFSW processes. Finite element analysis has been used to estimate the temperature distribution and width of TMAZ region in both the joints and the results have been compared with experimental results and subsequently correlated with mechanical properties.? 2016 China Ordnance Society. Production and hosting by Elsevier B.V. All rights reserved.展开更多
An attempt was made to optimize friction welding parameters to attain a minimum hardness at the interface and a maximum tensile strength of the dissimilar joints of AISI 304 austenitic stainless steel （ASS） and copp...An attempt was made to optimize friction welding parameters to attain a minimum hardness at the interface and a maximum tensile strength of the dissimilar joints of AISI 304 austenitic stainless steel （ASS） and copper （Cu） alloy using response surface methodology （RSM）. Three-factor, five-level central composite design matrix was used to specify experimental conditions. Twenty joints were fabricated using ASS and Cu alloy. Tensile strength and interface hardness were measured experimentally. Analysis of variance （ANOVA） method was used to find out significant main and interaction parameters and empirical relationships were developed using regression analysis. The friction welding parameters were optimized by constructing response graphs and contour plots using design expert software. The developed empirical relationships can be effectively used to predict tensile strength and interface hardness of friction welded ASS-Cu joints at 95% confidence level. The developed contour plots can be used to attain required level of optimum conditions to join ASS-Cu alloy by friction welding process.展开更多
Micro-arc oxidation(MAO) technique is capable of producing dense oxide films on the aluminium alloy surface. This oxide film protects the aluminium alloy from the corrosion attack for longer duration.Empirical relatio...Micro-arc oxidation(MAO) technique is capable of producing dense oxide films on the aluminium alloy surface. This oxide film protects the aluminium alloy from the corrosion attack for longer duration.Empirical relationships were derived to evaluate the MAO coating properties(porosity and hardness) by incorporating very important MAO parameters(current density, inter-electrode distance and oxidation time). MAO parameters were also optimized to achieve coatings with minimum porosity and maximum hardness. Further, the effect of MAO parameters on coating characteristics was analysed. From the results, it is found that the current density has greater influence on the responses than the other two parameters.展开更多
AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the...AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the best suitable process among the fusion welding processes such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) by evaluating the tensile properties of AA5059 aluminium alloy joints. The fracture path was identified by mapping the low hardness distribution profile (LHDP) across the weld cross section under tensile loading. Optical and scanning electron microscopies were used to characterize the microstructural features of the welded joints at various zones. It is evident from the results that GTAW joints showed superior tensile properties compared to GMAW joints and this is primarily owing to the presence of finer grains in the weld metal zone (WMZ) and narrow heat-affected zone (HAZ). The lower heat input associated with the GTAW process effectively reduced the size of the WMZ and HAZ compared to GMAW process. Lower heat input of GTAW process results in faster cooling rate which hinders the grain growth and reduces the evaporation of magnesium in weld metal compared to GMAW joints. The fracture surface of GTAW joint consists of more dimples than GMAW joints which is an indication that the GTAW joint possess improved ductility than GMAW joint.展开更多
In the Digital World scenario,the confidentiality of information in video transmission plays an important role.Chaotic systems have been shown to be effective for video signal encryption.To improve video transmission ...In the Digital World scenario,the confidentiality of information in video transmission plays an important role.Chaotic systems have been shown to be effective for video signal encryption.To improve video transmission secrecy,compressive encryption method is proposed to accomplish compression and encryption based on fractional order hyper chaotic system that incorporates Compressive Sensing(CS),pixel level,bit level scrambling and nucleotide Sequences operations.The measurement matrix generates by the fractional order hyper chaotic system strengthens the efficiency of the encryption process.To avoid plain text attack,the CS measurement is scrambled to its pixel level,bit level scrambling decreases the similarity between the adjacent measurements and the nucleotide sequence operations are done on the scrambled bits,increasing the encryption.Two stages are comprised in the reconstruction technique,the first stage uses the intra-frame similarity and offers robust preliminary retrieval for each frame,and the second stage iteratively improves the efficiency of reconstruction by integrating inter frame Multi Hypothesis(MH)estimation and weighted residual sparsity modeling.In each iteration,the residual coefficient weights are modified using a mathematical approach based on the MH predictions,and the Split Bregman iteration algorithm is defined to resolve weighted l1 regularization.Experimental findings show that the proposed algorithm provides good compression of video coupled with an efficient encryption method that is resistant to multiple attacks.展开更多
This article is the 15th contribution in the Fungal Diversity Notes series,wherein 115 taxa from three phyla,nine classes,28 orders,48 families,and 64 genera are treated.Fungal taxa described and illustrated in the pr...This article is the 15th contribution in the Fungal Diversity Notes series,wherein 115 taxa from three phyla,nine classes,28 orders,48 families,and 64 genera are treated.Fungal taxa described and illustrated in the present study include a new family,five new genera,61 new species,five new combinations,one synonym,one new variety and 31 records on new hosts or new geographical distributions.Ageratinicolaceae fam.nov.is introduced and accommodated in Pleosporales.The new genera introduced in this study are Ageratinicola,Kevinia,Pseudomultiseptospora(Parabambusicolaceae),Marasmiellomycena,and Vizzinia(Porotheleaceae).Newly described species are Abrothallus altoandinus,Ageratinicola kunmingensis,Allocryptovalsa aceris,Allophoma yuccae,Apiospora cannae,A.elliptica,A.pallidesporae,Boeremia wisteriae,Calycina papaeana,Clypeo-coccum lichenostigmoides,Coniochaeta riskali-shoyakubovii,Cryphonectria kunmingensis,Diaporthe angustiapiculata,D.campylandrae,D.longipapillata,Diatrypella guangdongense,Dothiorella franceschinii,Endocalyx phoenicis,Epicoc-cum terminosporum,Fulvifomes karaiensis,F.pannaensis,Ganoderma ghatensis,Hysterobrevium baoshanense,Inocybe avellaneorosea,I.lucida,Jahnula oblonga,Kevinia lignicola,Kirschsteiniothelia guangdongensis,Laboulbenia caprina,L.clavulata,L.cobiae,L.cosmodisci,L.nilotica,L.omalii,L.robusta,L.similis,L.stigmatophora,Laccaria rubriporus,Lasiodiplodia morindae,Lyophyllum agnijum,Marasmiellomycena pseudoomphaliiformis,Melomastia beihaiensis,Nemania guangdongensis,Nigrograna thailandica,Nigrospora ficuum,Oxydothis chinensis,O.yunnanensis,Petriella thailandica,Phaeoacremonium chinensis,Phialocephala chinensis,Phytophthora debattistii,Polyplosphaeria nigrospora,Pronectria loweniae,Seriascoma acutispora,Setoseptoria bambusae,Stictis anomianthi,Tarzetta tibetensis,Tarzetta urceolata,Tetraploa obpyriformis,Trichoglossum beninense,and Tricoderma pyrrosiae.We provide an emendation for Urnula ailaoshanensis Agaricus duplocingulatoides var.brevisporus introduced as a new variety based on morphology a展开更多
A friction stir welding window was developed for effective joining of AA2219 aluminium alloy. Joints were fabricated using different combination of process parameters such as rotational speed and welding speed. Based ...A friction stir welding window was developed for effective joining of AA2219 aluminium alloy. Joints were fabricated using different combination of process parameters such as rotational speed and welding speed. Based on macrostructural analysis, the friction stir welding window was constructed. The strength values of joints at different regions of friction stir welding window were analyzed using tensile properties, microstructural studies, and the fracture location of joints was correlated with the lowest hardness distribution profiles. These windows will act as reference maps for selecting appropriate friction stir welding process parameters to get good quality welds of AA2219 aluminium alloys.展开更多
In cloud computing, server consolidation is the part where very few persons go through the same. By consolidating the unused server space, memory can be reused for another data allocation. The objective of this paper ...In cloud computing, server consolidation is the part where very few persons go through the same. By consolidating the unused server space, memory can be reused for another data allocation. The objective of this paper is to improve resource utilization. Residual resource fragmentation refers to the state of the data center where sufficient amount of residual resources are available for any new VM allocation. To achieve this, there are three methods followed here. Active physical servers are identified. Then the maximum utilization of the resources is found out. Finally the resources are allocated and scheduled using the developed algorithm. In this work, we have proposed a new algorithm enhanced cloud consolidating algorithm. This algorithm improves some of the qualities of the cloud consolidating algorithm. Here the allocation technique is based on the cost and the memory.展开更多
The main objective of this investigation is to study the influence of arc constriction current frequency(ACCF)on tensile properties and microstructural evolution of aerospace Alloy 718 sheets(2 mm in thickness)joined ...The main objective of this investigation is to study the influence of arc constriction current frequency(ACCF)on tensile properties and microstructural evolution of aerospace Alloy 718 sheets(2 mm in thickness)joined by constricted arc TIG(CA-TIG)welding process.One variable at a time approach of design of experiments(DOE)was used,in which ACCF was varied from 4 to 20 kHz at an interval of 5 levels while other parameters were kept constant.The joints welded using ACCF of 4 kHz exhibited superior tensile properties extending joint efficiency up to 99.20%.It is attributed to the grain refinement in fusion zone leading to the evolution of finer,discrete Laves phase in interdendritic areas.An increase of ACCF above 12 kHz caused severe grain growth and evolution of coarser Laves phase in fusion zone.Alloy 718 welds showed more obvious tendency for Nb segregation and Laves phase formation at higher levels of ACCF due to the slower cooling rate.The volume fraction of Laves phase was increased by 62.31%at ACCF of 20 kHz compared to that at 4 kHz,thereby reducing the tensile properties of joints.This is mainly due to the stacking of heat input in weld thermal cycles at increased levels of ACCF.展开更多
The magnetically constricted arc technique was implemented to mitigate the heat input related metallurgical problems in Gas Tungsten Arc Welding(GTAW)of Inconel 718 alloy particularly Nb segregation and subsequent lav...The magnetically constricted arc technique was implemented to mitigate the heat input related metallurgical problems in Gas Tungsten Arc Welding(GTAW)of Inconel 718 alloy particularly Nb segregation and subsequent laves phase evolution in fusion zone.This paper reports the direct effect of magnetically constricted arc traverse speed(MCATS)on bead profile,tensile properties and microstructural evolution of Inconel 718 alloy sheets joined by Gas Tungsten Constricted Arc Welding(GTCAW)process.The mechanism amenable for the microstructural modification and corresponding influence on the tensile properties of joints is investigated both in qualitative and quantitative manner related to the mechanics of arc constriction and pulsing.It is correlated to the solidification conditions during welding.The relationship between MCATS and Arc Constriction Current(ACC)was derived.Its interaction effect on the magnetic arc constriction and joint performance was analysed.Results showed that the joints fabricated using CATS of 70 mm/min exhibited superior tensile properties(98.39% of base metal strength with 31.50% elongation).It is attributed to the grain refinement in fusion zone microstructure leading to the evolution of finer,discrete laves phase in interdendritic areas.展开更多
The recent aggrandizement of radio frequency(RF)signals in wireless power transmission combined with energy harvesting methods have led to the replacement of traditional battery-powered wireless networks since the blo...The recent aggrandizement of radio frequency(RF)signals in wireless power transmission combined with energy harvesting methods have led to the replacement of traditional battery-powered wireless networks since the blooming RF technology provides energy renewal of wireless devices with the quality of service(QoS).In addition,it does not require any unnecessary alterations on the transmission hardware side.A hybridized global optimization technique uniting Global best and Local best(GL)based particle swarm optimization(PSO)and ant colony optimization(ACO)is proposed in this paper to optimally allocate resources in wireless powered communication networks(WPCN)through coordinated operation of communication groups,in which the wireless energy transfer and information sharing take place concomitantly by the aid of a cooperative relay positioned in between the communicating groups.The designed algorithm assists in minimizing power consumption and maximizes the weighted sum rate at the end-user side.Thus the principal target of the system is coordinated optimization of energy beamforming along with time and energy allocation to reduce the total energy consumed combined with assured information rates of the communication groups.Numerical outputs are presented to manifest the proposed system’s performance to verify the analytical results via simulations.展开更多
This article is the 14th in the Fungal Diversity Notes series,wherein we report 98 taxa distributed in two phyla,seven classes,26 orders and 50 families which are described and illustrated.Taxa in this study were coll...This article is the 14th in the Fungal Diversity Notes series,wherein we report 98 taxa distributed in two phyla,seven classes,26 orders and 50 families which are described and illustrated.Taxa in this study were collected from Australia,Brazil,Burkina Faso,Chile,China,Cyprus,Egypt,France,French Guiana,India,Indonesia,Italy,Laos,Mexico,Russia,Sri Lanka,Thailand,and Vietnam.There are 59 new taxa,39 new hosts and new geographical distributions with one new combination.The 59 new species comprise Angustimassarina kunmingense,Asterina lopi,Asterina brigadeirensis,Bartalinia bidenticola,Bartalinia caryotae,Buellia pruinocalcarea,Coltricia insularis,Colletotrichum fexuosum,Colletotrichum thasutense,Coniochaeta caraganae,Coniothyrium yuccicola,Dematipyriforma aquatic,Dematipyriforma globispora,Dematipyriforma nilotica,Distoseptispora bambusicola,Fulvifomes jawadhuvensis,Fulvifomes malaiyanurensis,Fulvifomes thiruvannamalaiensis,Fusarium purpurea,Gerronema atrovirens,Gerronema favum,Gerronema keralense,Gerronema kuruvense,Grammothele taiwanensis,Hongkongmyces changchunensis,Hypoxylon inaequale,Kirschsteiniothelia acutisporum,Kirschsteiniothelia crustaceum,Kirschsteiniothelia extensum,Kirschsteiniothelia septemseptatum,Kirschsteiniothelia spatiosum,Lecanora immersocalcarea,Lepiota subthailandica,Lindgomyces guizhouensis,Marthe asmius pallidoaurantiacus,Marasmius tangerinus,Neovaginatispora mangiferae,Pararamichloridium aquisubtropicum,Pestalotiopsis piraubensis,Phacidium chinaum,Phaeoisaria goiasensis,Phaeoseptum thailandicum,Pleurothecium aquisubtropicum,Pseudocercospora vernoniae,Pyrenophora verruculosa,Rhachomyces cruralis,Rhachomyces hyperommae,Rhachomyces magrinii,Rhachomyces platyprosophi,Rhizomarasmius cunninghamietorum,Skeletocutis cangshanensis,Skeletocutis subchrysella,Sporisorium anadelphiae-leptocomae,Tetraploa dashaoensis,Tomentella exiguelata,Tomentella fuscoaraneosa,Tricholomopsis lechatii,Vaginatispora favispora and Wetmoreana blastidiocalcarea.The new combination is Torula sundara.The 39 new records on ho展开更多
Among the various possibilities of limiting the disposal of fly ashes (lignite), their reutilization as adsorbent materials is worthy of consideration. To this end, proper ashes beneficiation techniques can be put int...Among the various possibilities of limiting the disposal of fly ashes (lignite), their reutilization as adsorbent materials is worthy of consideration. To this end, proper ashes beneficiation techniques can be put into practice. The adsorption of toxic compounds from industrial wastewater is an effective method for both treating these effluents and recycling lignite fly ash. The aim of this paper is to give a contribution for understanding the relationships among beneficiation treatments, adsorbent properties and adsorption mechanism and efficiency. In this context, the lignite fly ash was demineralised using concentrated HCl and HF (FA-DEM) and was used as adsorbent for Zn(II) ions from aqueous solutions. Batch experiments were carried out under various adsorbent dosages, pH, contact time and different metal ion concentrations. For FA-DEM, the 57.7% removal of Zn(II) ion was achieved under the optimum conditions of adsorbent dosages of 4 g/L, pH at 6, temperature at 303 K and the contact time of 1.15 h. The adsorption of Zn(II) ions onto FA-DEM followed the pseudo second order kinetics. The Langmuir isotherm model best represented the equilibrium data.展开更多
This paper presents a low power tunable active inductor and RF band pass filter suitable for multiband RF front end circuits. The active inductor circuit uses the PMOS cascode structure as the negative transconductor ...This paper presents a low power tunable active inductor and RF band pass filter suitable for multiband RF front end circuits. The active inductor circuit uses the PMOS cascode structure as the negative transconductor of a gyrator to reduce the noise voltage. Also, this structure provides possible negative resistance to reduce the inductor loss with wide inductive bandwidth and high resonance frequency. The RF band pass filter is realized using the proposed active inductor with suitable input and output buffer stages. The tuning of the center frequency for multiband operation is achieved through the controllable current source. The designed active inductor and RF band pass filter are simulated in 180 nm and 45 nm CMOS process using the Synopsys HSPICE simulation tool and their performances are compared. The parameters, such as resonance frequency, tuning capability, noise and power dissipation, are analyzed for these CMOS technologies and discussed. The design of a third order band pass filter using an active inductor is also presented.展开更多
基金Project DRAO/08/1061356/M1 supported by Aeronautical Research & Development Board (ARDB),New Delhi,India
文摘AA2219 aluminium alloy square butt joints without filler metal addition were fabricated using gas tungsten arc welding （GTAW）, electron beam welding （EBW） and friction stir welding （FSW） processes. The effects of three welding processes on the tensile, fatigue and corrosion behaviour were studied. Microstructure analysis was carried out using optical and electron microscopes. The results show that the FSW joints exhibit superior tensile and fatigue properties compared to EBW and GTAW joints. It is also found that the friction stir welds show lower corrosion resistance than EB and GTA welds. This is mainly due to the presence of finer grains and uniform distribution of strengthening precipitates in the weld metal of FSW joints.
基金the International Rice Biotechnology Program Schemes RF98001 #642 and RF 98001 #700 from the Rockefeller Foundation, New Yorkto M. Maheswaran
文摘Agricultural environments deteriorate due to excess nitrogen application. Breeding for low nitrogen responsive genotypes can reduce soil nitrogen input. Rice genotypes respond variably to soil available nitrogen. The present study attempted quantification of genotype x nitrogen level interaction and mapping of quantitative trait loci （QTLs） associated with nitrogen use efficiency （NUE） and other associated agronomic traits. Twelve parameters were observed across a set of 82 double haploid （DH） lines derived from IR64/Azucena. Three nitrogen regimes namely, native （0 kg/ha; no nitrogen applied）, optimum （100 kg/ha） and high （200 kg/ha） replicated thrice were the environments. The parents and DH lines were significantly varying for all traits under different nitrogen regimes. All traits except plant height recorded significant genotype × environment interaction. Individual plant yield was positively correlated with nitrogen use efficiency and nitrogen uptake. Sixteen QTLs were detected by composite interval mapping. Eleven QTLs showed significant QTL × environment interactions. On chromosome 3, seven QTLs were detected associated with nitrogen use, plant yield and associated traits. A QTL region between markers RZ678, RZ574 and RZ284 was associated with nitrogen use and yield. This chromosomal region was enriched with expressed gene sequences of known key nitrogen assimilation genes.
基金Council of Scientific and Industrial Research (CSIR), New Delhi, India, for the financial support to carry out this investigation through sponsored project No. 22(0615)/13/EMR-II dated 26.02.2013
文摘Joining of dissimilar metals will offer many advantages in transportation sectors such as fuel consumption,weightreduction and emission reduction.However,joining of aluminium(Al)alloys with magnesium(Mg)alloys by fusion welding processis very complicated.Friction stir welding(FSW)is a feasible method to join these two dissimilar alloys.Mixing these two metalstogether in stir zone(SZ)leads to poor corrosion resistance.In this investigation,an attempt has been made to understand thecorrosion resistance of SZ of FSWed dissimilar joints of AA6061Al alloy and AZ31B Mg alloy.Potentiodynamic polarization testwas conducted by varying chloride ion concentration,pH value of the NaCl solution and exposure time.The corroded surfaces wereanalyzed using optical microscopy,scanning electron microscopy and XRD techniques.Of these three factors investigated,exposuretime is found to be the most significant factor to influence the corrosion behaviour of SZ of friction stir welded dissimilar joints ofAl/Mg alloys.
基金The Director,Naval Material Research Laboratory(NMRL),Ambernath for financial support through CARS project No:G8/15250/2011 dated29.02.2012
文摘Naval grade high strength low alloy(HSLA) steels can be easily welded by all types of fusion welding processes. However, fusion welding of these steels leads to the problems such as cold cracking, residual stress, distortion and fatigue damage. These problems can be eliminated by solid state welding process such as friction stir welding(FSW). In this investigation, a comparative evaluation of mechanical(tensile, impact,hardness) properties and microstructural features of shielded metal arc(SMA), gas metal arc(GMA) and friction stir welded(FSW) naval grade HSLA steel joints was carried out. It was found that the use of FSW process eliminated the problems related to fusion welding processes and also resulted in the superior mechanical properties compared to GMA and SMA welded joints.
文摘The nesting behaviour of sea turtles remains a subject to study, due to their enigmatic pattern of seasonal breeding activities. Over a period of time, several reports have been made in this context associated with the nesting behaviour of the Olive Ridley turtles. In the present study, characteristics of the breeding beach and nesting pattern of Olive Ridley (Lepidochelys olivacea) at Ramnagar along N-E coast of Andaman Islands were investigated, during the nesting periods 2016-2017. The study area hosts Olive Ridley, the dominant sea turtles with more than 300 individuals nesting each year. For this study, the number of sea turtles visited, nested, the sediment characters, salinity, and temperature were taken. The exposed sandy nesting beach characteristics are prone to varying degrees of morphological changes every day. The results depict that even though similar grain size (Coarse Sand to Fine Sand and Very well sorted to Poorly Sorted), with an ambient incubating temperature, pH and salinity with wide nesting area, the selective nesting in the particular location of the beach identified because of comfortable energy conditions in the waters (1.5 m/s) favours the female turtles to reach the beach at the preferable site of Ramnagar and nest.
文摘Nesting behaviour of sea turtles remains a subject to study, due to their enigmatic pattern of seasonal breeding activities. In the present study, characteristics of the breeding turtle, Olive Ridley (Lepidochelys olivacea) at Ramnagar along N-E coast of North Andaman Islands were investigated, for the nesting periods 2016-2017. Olive Ridley is the dominant sea turtles, with more than 300 individuals nesting every season with at least a 75% hatching success rate. It is one of the conducive, highly protective and undisturbed nesting sites for Olive Ridley on North Andaman coast. In the present study an initiative is made, to identify nature’s cues and the biological characteristics of Olive Ridley, which leads it to nest at Ramnagar beach, with a high hatchling success rate.
基金the financial support of the Directorate of Extramural Research & Intellectual Property Rights (ER&IPR)Defense Research Development Organization (DRDO)New Delhi through a R&D project no. DRDO-ERIPER/ERIP/ER/0903821/M/01/1404 to carry out this investigation
文摘Friction stir welding(FSW) is a promising welding process that can join age hardenable aluminium alloys with high joint efficiency. However,the thermal cycles experienced by the material to be joined during FSW resulted in the deterioration of mechanical properties due to the coarsening and dissolution of strengthening precipitates in the thermo-mechanical affected zone(TMAZ) and heat affected zone(HAZ). Under water friction stir welding(UWFSW) is a variant of FSW process which can maintain low heat input as well as constant heat input along the weld line. The heat conduction and dissipation during UWFSW controls the width of TMAZ and HAZ and also improves the joint properties. In this investigation, an attempt has been made to evaluate the mechanical properties and microstructural characteristics of AA2519-T87 aluminium alloy joints made by FSW and UWFSW processes. Finite element analysis has been used to estimate the temperature distribution and width of TMAZ region in both the joints and the results have been compared with experimental results and subsequently correlated with mechanical properties.? 2016 China Ordnance Society. Production and hosting by Elsevier B.V. All rights reserved.
文摘An attempt was made to optimize friction welding parameters to attain a minimum hardness at the interface and a maximum tensile strength of the dissimilar joints of AISI 304 austenitic stainless steel （ASS） and copper （Cu） alloy using response surface methodology （RSM）. Three-factor, five-level central composite design matrix was used to specify experimental conditions. Twenty joints were fabricated using ASS and Cu alloy. Tensile strength and interface hardness were measured experimentally. Analysis of variance （ANOVA） method was used to find out significant main and interaction parameters and empirical relationships were developed using regression analysis. The friction welding parameters were optimized by constructing response graphs and contour plots using design expert software. The developed empirical relationships can be effectively used to predict tensile strength and interface hardness of friction welded ASS-Cu joints at 95% confidence level. The developed contour plots can be used to attain required level of optimum conditions to join ASS-Cu alloy by friction welding process.
基金Council of Scientific and Industrial Research (G8/19901/2013), New Delhi for the financial support provided to conduct this investigation through sponsored project No. 22(0615)/13/EMR-II dated 26.02.2013
文摘Micro-arc oxidation(MAO) technique is capable of producing dense oxide films on the aluminium alloy surface. This oxide film protects the aluminium alloy from the corrosion attack for longer duration.Empirical relationships were derived to evaluate the MAO coating properties(porosity and hardness) by incorporating very important MAO parameters(current density, inter-electrode distance and oxidation time). MAO parameters were also optimized to achieve coatings with minimum porosity and maximum hardness. Further, the effect of MAO parameters on coating characteristics was analysed. From the results, it is found that the current density has greater influence on the responses than the other two parameters.
文摘AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the best suitable process among the fusion welding processes such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) by evaluating the tensile properties of AA5059 aluminium alloy joints. The fracture path was identified by mapping the low hardness distribution profile (LHDP) across the weld cross section under tensile loading. Optical and scanning electron microscopies were used to characterize the microstructural features of the welded joints at various zones. It is evident from the results that GTAW joints showed superior tensile properties compared to GMAW joints and this is primarily owing to the presence of finer grains in the weld metal zone (WMZ) and narrow heat-affected zone (HAZ). The lower heat input associated with the GTAW process effectively reduced the size of the WMZ and HAZ compared to GMAW process. Lower heat input of GTAW process results in faster cooling rate which hinders the grain growth and reduces the evaporation of magnesium in weld metal compared to GMAW joints. The fracture surface of GTAW joint consists of more dimples than GMAW joints which is an indication that the GTAW joint possess improved ductility than GMAW joint.
文摘In the Digital World scenario,the confidentiality of information in video transmission plays an important role.Chaotic systems have been shown to be effective for video signal encryption.To improve video transmission secrecy,compressive encryption method is proposed to accomplish compression and encryption based on fractional order hyper chaotic system that incorporates Compressive Sensing(CS),pixel level,bit level scrambling and nucleotide Sequences operations.The measurement matrix generates by the fractional order hyper chaotic system strengthens the efficiency of the encryption process.To avoid plain text attack,the CS measurement is scrambled to its pixel level,bit level scrambling decreases the similarity between the adjacent measurements and the nucleotide sequence operations are done on the scrambled bits,increasing the encryption.Two stages are comprised in the reconstruction technique,the first stage uses the intra-frame similarity and offers robust preliminary retrieval for each frame,and the second stage iteratively improves the efficiency of reconstruction by integrating inter frame Multi Hypothesis(MH)estimation and weighted residual sparsity modeling.In each iteration,the residual coefficient weights are modified using a mathematical approach based on the MH predictions,and the Split Bregman iteration algorithm is defined to resolve weighted l1 regularization.Experimental findings show that the proposed algorithm provides good compression of video coupled with an efficient encryption method that is resistant to multiple attacks.
文摘This article is the 15th contribution in the Fungal Diversity Notes series,wherein 115 taxa from three phyla,nine classes,28 orders,48 families,and 64 genera are treated.Fungal taxa described and illustrated in the present study include a new family,five new genera,61 new species,five new combinations,one synonym,one new variety and 31 records on new hosts or new geographical distributions.Ageratinicolaceae fam.nov.is introduced and accommodated in Pleosporales.The new genera introduced in this study are Ageratinicola,Kevinia,Pseudomultiseptospora(Parabambusicolaceae),Marasmiellomycena,and Vizzinia(Porotheleaceae).Newly described species are Abrothallus altoandinus,Ageratinicola kunmingensis,Allocryptovalsa aceris,Allophoma yuccae,Apiospora cannae,A.elliptica,A.pallidesporae,Boeremia wisteriae,Calycina papaeana,Clypeo-coccum lichenostigmoides,Coniochaeta riskali-shoyakubovii,Cryphonectria kunmingensis,Diaporthe angustiapiculata,D.campylandrae,D.longipapillata,Diatrypella guangdongense,Dothiorella franceschinii,Endocalyx phoenicis,Epicoc-cum terminosporum,Fulvifomes karaiensis,F.pannaensis,Ganoderma ghatensis,Hysterobrevium baoshanense,Inocybe avellaneorosea,I.lucida,Jahnula oblonga,Kevinia lignicola,Kirschsteiniothelia guangdongensis,Laboulbenia caprina,L.clavulata,L.cobiae,L.cosmodisci,L.nilotica,L.omalii,L.robusta,L.similis,L.stigmatophora,Laccaria rubriporus,Lasiodiplodia morindae,Lyophyllum agnijum,Marasmiellomycena pseudoomphaliiformis,Melomastia beihaiensis,Nemania guangdongensis,Nigrograna thailandica,Nigrospora ficuum,Oxydothis chinensis,O.yunnanensis,Petriella thailandica,Phaeoacremonium chinensis,Phialocephala chinensis,Phytophthora debattistii,Polyplosphaeria nigrospora,Pronectria loweniae,Seriascoma acutispora,Setoseptoria bambusae,Stictis anomianthi,Tarzetta tibetensis,Tarzetta urceolata,Tetraploa obpyriformis,Trichoglossum beninense,and Tricoderma pyrrosiae.We provide an emendation for Urnula ailaoshanensis Agaricus duplocingulatoides var.brevisporus introduced as a new variety based on morphology a
文摘A friction stir welding window was developed for effective joining of AA2219 aluminium alloy. Joints were fabricated using different combination of process parameters such as rotational speed and welding speed. Based on macrostructural analysis, the friction stir welding window was constructed. The strength values of joints at different regions of friction stir welding window were analyzed using tensile properties, microstructural studies, and the fracture location of joints was correlated with the lowest hardness distribution profiles. These windows will act as reference maps for selecting appropriate friction stir welding process parameters to get good quality welds of AA2219 aluminium alloys.
文摘In cloud computing, server consolidation is the part where very few persons go through the same. By consolidating the unused server space, memory can be reused for another data allocation. The objective of this paper is to improve resource utilization. Residual resource fragmentation refers to the state of the data center where sufficient amount of residual resources are available for any new VM allocation. To achieve this, there are three methods followed here. Active physical servers are identified. Then the maximum utilization of the resources is found out. Finally the resources are allocated and scheduled using the developed algorithm. In this work, we have proposed a new algorithm enhanced cloud consolidating algorithm. This algorithm improves some of the qualities of the cloud consolidating algorithm. Here the allocation technique is based on the cost and the memory.
基金This work was supported by the Indian Space Research Organization(ISRO),Department of Space,India,under ISRO RESPOND scheme(Project No.ISRO/RES/3/728/16-17).
文摘The main objective of this investigation is to study the influence of arc constriction current frequency(ACCF)on tensile properties and microstructural evolution of aerospace Alloy 718 sheets(2 mm in thickness)joined by constricted arc TIG(CA-TIG)welding process.One variable at a time approach of design of experiments(DOE)was used,in which ACCF was varied from 4 to 20 kHz at an interval of 5 levels while other parameters were kept constant.The joints welded using ACCF of 4 kHz exhibited superior tensile properties extending joint efficiency up to 99.20%.It is attributed to the grain refinement in fusion zone leading to the evolution of finer,discrete Laves phase in interdendritic areas.An increase of ACCF above 12 kHz caused severe grain growth and evolution of coarser Laves phase in fusion zone.Alloy 718 welds showed more obvious tendency for Nb segregation and Laves phase formation at higher levels of ACCF due to the slower cooling rate.The volume fraction of Laves phase was increased by 62.31%at ACCF of 20 kHz compared to that at 4 kHz,thereby reducing the tensile properties of joints.This is mainly due to the stacking of heat input in weld thermal cycles at increased levels of ACCF.
基金funded by Indian Space Research Organization (ISRO) India. Project No. ISRO/RES/3/728/16e17
文摘The magnetically constricted arc technique was implemented to mitigate the heat input related metallurgical problems in Gas Tungsten Arc Welding(GTAW)of Inconel 718 alloy particularly Nb segregation and subsequent laves phase evolution in fusion zone.This paper reports the direct effect of magnetically constricted arc traverse speed(MCATS)on bead profile,tensile properties and microstructural evolution of Inconel 718 alloy sheets joined by Gas Tungsten Constricted Arc Welding(GTCAW)process.The mechanism amenable for the microstructural modification and corresponding influence on the tensile properties of joints is investigated both in qualitative and quantitative manner related to the mechanics of arc constriction and pulsing.It is correlated to the solidification conditions during welding.The relationship between MCATS and Arc Constriction Current(ACC)was derived.Its interaction effect on the magnetic arc constriction and joint performance was analysed.Results showed that the joints fabricated using CATS of 70 mm/min exhibited superior tensile properties(98.39% of base metal strength with 31.50% elongation).It is attributed to the grain refinement in fusion zone microstructure leading to the evolution of finer,discrete laves phase in interdendritic areas.
文摘The recent aggrandizement of radio frequency(RF)signals in wireless power transmission combined with energy harvesting methods have led to the replacement of traditional battery-powered wireless networks since the blooming RF technology provides energy renewal of wireless devices with the quality of service(QoS).In addition,it does not require any unnecessary alterations on the transmission hardware side.A hybridized global optimization technique uniting Global best and Local best(GL)based particle swarm optimization(PSO)and ant colony optimization(ACO)is proposed in this paper to optimally allocate resources in wireless powered communication networks(WPCN)through coordinated operation of communication groups,in which the wireless energy transfer and information sharing take place concomitantly by the aid of a cooperative relay positioned in between the communicating groups.The designed algorithm assists in minimizing power consumption and maximizes the weighted sum rate at the end-user side.Thus the principal target of the system is coordinated optimization of energy beamforming along with time and energy allocation to reduce the total energy consumed combined with assured information rates of the communication groups.Numerical outputs are presented to manifest the proposed system’s performance to verify the analytical results via simulations.
文摘This article is the 14th in the Fungal Diversity Notes series,wherein we report 98 taxa distributed in two phyla,seven classes,26 orders and 50 families which are described and illustrated.Taxa in this study were collected from Australia,Brazil,Burkina Faso,Chile,China,Cyprus,Egypt,France,French Guiana,India,Indonesia,Italy,Laos,Mexico,Russia,Sri Lanka,Thailand,and Vietnam.There are 59 new taxa,39 new hosts and new geographical distributions with one new combination.The 59 new species comprise Angustimassarina kunmingense,Asterina lopi,Asterina brigadeirensis,Bartalinia bidenticola,Bartalinia caryotae,Buellia pruinocalcarea,Coltricia insularis,Colletotrichum fexuosum,Colletotrichum thasutense,Coniochaeta caraganae,Coniothyrium yuccicola,Dematipyriforma aquatic,Dematipyriforma globispora,Dematipyriforma nilotica,Distoseptispora bambusicola,Fulvifomes jawadhuvensis,Fulvifomes malaiyanurensis,Fulvifomes thiruvannamalaiensis,Fusarium purpurea,Gerronema atrovirens,Gerronema favum,Gerronema keralense,Gerronema kuruvense,Grammothele taiwanensis,Hongkongmyces changchunensis,Hypoxylon inaequale,Kirschsteiniothelia acutisporum,Kirschsteiniothelia crustaceum,Kirschsteiniothelia extensum,Kirschsteiniothelia septemseptatum,Kirschsteiniothelia spatiosum,Lecanora immersocalcarea,Lepiota subthailandica,Lindgomyces guizhouensis,Marthe asmius pallidoaurantiacus,Marasmius tangerinus,Neovaginatispora mangiferae,Pararamichloridium aquisubtropicum,Pestalotiopsis piraubensis,Phacidium chinaum,Phaeoisaria goiasensis,Phaeoseptum thailandicum,Pleurothecium aquisubtropicum,Pseudocercospora vernoniae,Pyrenophora verruculosa,Rhachomyces cruralis,Rhachomyces hyperommae,Rhachomyces magrinii,Rhachomyces platyprosophi,Rhizomarasmius cunninghamietorum,Skeletocutis cangshanensis,Skeletocutis subchrysella,Sporisorium anadelphiae-leptocomae,Tetraploa dashaoensis,Tomentella exiguelata,Tomentella fuscoaraneosa,Tricholomopsis lechatii,Vaginatispora favispora and Wetmoreana blastidiocalcarea.The new combination is Torula sundara.The 39 new records on ho
文摘Among the various possibilities of limiting the disposal of fly ashes (lignite), their reutilization as adsorbent materials is worthy of consideration. To this end, proper ashes beneficiation techniques can be put into practice. The adsorption of toxic compounds from industrial wastewater is an effective method for both treating these effluents and recycling lignite fly ash. The aim of this paper is to give a contribution for understanding the relationships among beneficiation treatments, adsorbent properties and adsorption mechanism and efficiency. In this context, the lignite fly ash was demineralised using concentrated HCl and HF (FA-DEM) and was used as adsorbent for Zn(II) ions from aqueous solutions. Batch experiments were carried out under various adsorbent dosages, pH, contact time and different metal ion concentrations. For FA-DEM, the 57.7% removal of Zn(II) ion was achieved under the optimum conditions of adsorbent dosages of 4 g/L, pH at 6, temperature at 303 K and the contact time of 1.15 h. The adsorption of Zn(II) ions onto FA-DEM followed the pseudo second order kinetics. The Langmuir isotherm model best represented the equilibrium data.
文摘This paper presents a low power tunable active inductor and RF band pass filter suitable for multiband RF front end circuits. The active inductor circuit uses the PMOS cascode structure as the negative transconductor of a gyrator to reduce the noise voltage. Also, this structure provides possible negative resistance to reduce the inductor loss with wide inductive bandwidth and high resonance frequency. The RF band pass filter is realized using the proposed active inductor with suitable input and output buffer stages. The tuning of the center frequency for multiband operation is achieved through the controllable current source. The designed active inductor and RF band pass filter are simulated in 180 nm and 45 nm CMOS process using the Synopsys HSPICE simulation tool and their performances are compared. The parameters, such as resonance frequency, tuning capability, noise and power dissipation, are analyzed for these CMOS technologies and discussed. The design of a third order band pass filter using an active inductor is also presented.
