Introduction: Undetected refractive errors constitute a health problem among school children who cannot take advantage of educational opportunities. The authors studied the prevalence of refractive errors in school ch...Introduction: Undetected refractive errors constitute a health problem among school children who cannot take advantage of educational opportunities. The authors studied the prevalence of refractive errors in school children aged 5 to 15 at CHU-IOTA. Patients and Method: This is a prospective, descriptive cross-sectional study carried out in the ophthalmic-pediatrics department of CHU-IOTA, from October to November 2023. Results: We received 340 school children aged 5 to 15, among whom 111 presented ametropia, i.e. a prevalence of 32.65%. The average age was 11.42 ± 2.75 years and a sex ratio of 0.59. The average visual acuity was 4/10 (range 1/10 and 10/10). We found refractive defects: astigmatism 73.87%, hyperopia 23.87% of cases and myopia 2.25%. The decline in distance visual acuity was the most common functional sign. Ocular abnormalities associated with ametropia were dominated by allergic conjunctivitis (26.13%) and papillary excavation (6.31%) in astigmatics;allergic conjunctivitis (9.01%) and papillary excavation (7.20%) in hyperopic patients;turbid vitreous (0.90%), myopic choroidosis (0.45%) and allergic conjunctivitis (0.45%) in myopes. Conclusion: Refractive errors constitute a reality and a major public health problem among school children.展开更多
This present study comes in addition to overcome the problems of separation of fine particles of TiO<sub>2</sub> in heterogeneous photocatalysis after treatment. It aims to show the potential for using tit...This present study comes in addition to overcome the problems of separation of fine particles of TiO<sub>2</sub> in heterogeneous photocatalysis after treatment. It aims to show the potential for using titaniferous sand as a new semiconductor under solar irradiation. The photocatalytic efficiency of this titaniferous sand was tested on a pesticide (Azadirachtin). A tubular photocatalytic reactor with recirculation of the polluting solution was designed for the elimination of the pesticide in an aqueous solution. Before its use as a photocatalyst, the titaniferous sand has undergone a specific treatment that consists of calcination at 600℃ followed by extraction of the calcined natural organic materials, which can interfere with the measurement of analytical parameters such as COD. The titaniferous sand was also characterized by X-ray fluorescence spectroscopy (XRF). XRF analyses have shown that TiO<sub>2</sub> is predominant in the titaniferous sand with a percentage that has been estimated at 46.34%. The influence of various experimental parameters such as the flow rate of the polluting solution, the concentration of titaniferous sand, the presence of oxygen and the intensity of the overall rate of sunshine, was studied to optimize the photocatalytic degradation of the pesticide. The results showed that the highest removal rate (70%) was observed under the following conditions: a pH of 6, a titaniferous sand concentration of 150 g/L, a flow rate of 0.3 mL/min, and a sunshine rate of 354 W/m<sup>2</sup> and in the presence of atmospheric oxygen. Under these experimental conditions, the rate of photodegradation of the pesticide follows the pseudo first order kinetic model of Langmuir Hinshelwood with a coefficient of determination R<sup>2</sup> of 0.9869 and an apparent rate constant of 0.0029 min<sup>-1</sup>. The results clearly demonstrated the potential of titaniferous sand as a photocatalyst sensitive to sunlight for the effective removal of pesticides in the aquatic environment.展开更多
Copper is considered a heavy metal that can be toxic at certain concentrations and its presence in water is a potential threat to public health. These heavy metals also contribute to a remarkable degradation of the en...Copper is considered a heavy metal that can be toxic at certain concentrations and its presence in water is a potential threat to public health. These heavy metals also contribute to a remarkable degradation of the environment, hence the need for effective treatment methods to remove them. In this study, a mixture of titaniferous sand and calcium silicate was used as adsorbent material to eliminate copper in solution. The calcium silicate was synthesised from fluosilicic acid, which is a by-product of phosphoric acid manufacture. The titaniferous sand is a residue from a mining industry. Both adsorbents were characterised by infrared spectroscopy and X-ray fluorescence to determine their compositions and physicochemical properties. The response surfaces, through the Box-Behnken model, were used to model and optimise various adsorption parameters, namely initial copper concentration (A: 60 - 200 mg/L), adsorbent dose (B: 0.1 - 0.6 g) and pH (C: 4 - 10). The copper removal efficiency (98.92%), after statistical analysis, was obtained under the following optimal conditions: an adsorbent dose of 0.55 g, an initial copper concentration of 197.25 mg/L and a pH of 9.85. The study of the effects of the operating parameters showed that they had a positive effect on the copper removal efficiency.展开更多
In recent years, the discharge of dye-laden effluents from the textile industries into the aquatic environment has increased considerably. These industries are among the largest consumers of water. They generate huge ...In recent years, the discharge of dye-laden effluents from the textile industries into the aquatic environment has increased considerably. These industries are among the largest consumers of water. They generate huge amounts of pollutants from their huge discharge of toxic effluents and pose serious public health problems. So, this study focuses on the use of the mixture of titaniferous sand and attapulgite for the removal of methyl violet by adsorption in discontinuous mode. The different adsorbents were characterized by X-ray fluorescence spectroscopy and their different physico-chemical properties such as pH, zero charge potential, bulk and absolute density, porosity and specific surface area were determined. The response surfaces, through the Box-Behnken model, were used to model and optimize the operating conditions. The different factors studied were the ratio of titaniferous sand and attapulgite, the initial concentration of methyl violet and the pH. These vary between 1.25 and 8, 20 and 100 mg/L, 4 and 10 respectively. The results obtained after statistical analysis of the data show that the optimum mixture ratio is 2, the optimum concentration is 99.92 mg/L and the optimum pH is 9.88 corresponding to a maximum capacity of 5.52 mg/g and a maximum removal efficiency of 99.56%. The study of the effects of the different factors showed that the initial concentration of methyl violet and the pH significantly influence the adsorption capacity and the removal efficiency of the dye.展开更多
Three beakers for removing Fe (II) in reconstituted water (doped with FeSO<sub>4</sub>) were built and tested. Given the set operating conditions ([O<sub>2</sub>] > 4 mg·L<sup>...Three beakers for removing Fe (II) in reconstituted water (doped with FeSO<sub>4</sub>) were built and tested. Given the set operating conditions ([O<sub>2</sub>] > 4 mg·L<sup>-1</sup>, P<sub>atm</sub> = 1.013 bar, T = 25°C ± 1°C and [Fe<sup>2+</sup>]<sub>0</sub> = 0.5 to 2 mg·L<sup>-1</sup>), removal of iron was caused by biological and possibly physical and chemical oxidation because there is a quantity of free oxygen in the medium. The extent of each type of oxidation has not been evaluated as it specifically studies the biological degradation of iron in these beaker tests by setting the operating conditions (pH > 6.5, dissolved oxygen from 0 to 8 mg·L<sup>-1</sup>, Redox Potential from 100 to 400 mV). The experimental studies focused particularly on the measurements of maximum wavelength, conversion efficiencies from Fe (II) to Fe (III), the effect of the Fe (II) concentration, the influence of pH, the action of the temperature of the prepared solutions and the effect of O<sub>2</sub> concentration under specified operating conditions. It noticed precipitated amounts of iron deposited at the bottom of the beakers. Thus, the low concentrations of Fe (II) detected in the influent after the biological oxidation operation could be attributed to microorganisms that consume iron as a substrate.展开更多
文摘Introduction: Undetected refractive errors constitute a health problem among school children who cannot take advantage of educational opportunities. The authors studied the prevalence of refractive errors in school children aged 5 to 15 at CHU-IOTA. Patients and Method: This is a prospective, descriptive cross-sectional study carried out in the ophthalmic-pediatrics department of CHU-IOTA, from October to November 2023. Results: We received 340 school children aged 5 to 15, among whom 111 presented ametropia, i.e. a prevalence of 32.65%. The average age was 11.42 ± 2.75 years and a sex ratio of 0.59. The average visual acuity was 4/10 (range 1/10 and 10/10). We found refractive defects: astigmatism 73.87%, hyperopia 23.87% of cases and myopia 2.25%. The decline in distance visual acuity was the most common functional sign. Ocular abnormalities associated with ametropia were dominated by allergic conjunctivitis (26.13%) and papillary excavation (6.31%) in astigmatics;allergic conjunctivitis (9.01%) and papillary excavation (7.20%) in hyperopic patients;turbid vitreous (0.90%), myopic choroidosis (0.45%) and allergic conjunctivitis (0.45%) in myopes. Conclusion: Refractive errors constitute a reality and a major public health problem among school children.
文摘This present study comes in addition to overcome the problems of separation of fine particles of TiO<sub>2</sub> in heterogeneous photocatalysis after treatment. It aims to show the potential for using titaniferous sand as a new semiconductor under solar irradiation. The photocatalytic efficiency of this titaniferous sand was tested on a pesticide (Azadirachtin). A tubular photocatalytic reactor with recirculation of the polluting solution was designed for the elimination of the pesticide in an aqueous solution. Before its use as a photocatalyst, the titaniferous sand has undergone a specific treatment that consists of calcination at 600℃ followed by extraction of the calcined natural organic materials, which can interfere with the measurement of analytical parameters such as COD. The titaniferous sand was also characterized by X-ray fluorescence spectroscopy (XRF). XRF analyses have shown that TiO<sub>2</sub> is predominant in the titaniferous sand with a percentage that has been estimated at 46.34%. The influence of various experimental parameters such as the flow rate of the polluting solution, the concentration of titaniferous sand, the presence of oxygen and the intensity of the overall rate of sunshine, was studied to optimize the photocatalytic degradation of the pesticide. The results showed that the highest removal rate (70%) was observed under the following conditions: a pH of 6, a titaniferous sand concentration of 150 g/L, a flow rate of 0.3 mL/min, and a sunshine rate of 354 W/m<sup>2</sup> and in the presence of atmospheric oxygen. Under these experimental conditions, the rate of photodegradation of the pesticide follows the pseudo first order kinetic model of Langmuir Hinshelwood with a coefficient of determination R<sup>2</sup> of 0.9869 and an apparent rate constant of 0.0029 min<sup>-1</sup>. The results clearly demonstrated the potential of titaniferous sand as a photocatalyst sensitive to sunlight for the effective removal of pesticides in the aquatic environment.
文摘Copper is considered a heavy metal that can be toxic at certain concentrations and its presence in water is a potential threat to public health. These heavy metals also contribute to a remarkable degradation of the environment, hence the need for effective treatment methods to remove them. In this study, a mixture of titaniferous sand and calcium silicate was used as adsorbent material to eliminate copper in solution. The calcium silicate was synthesised from fluosilicic acid, which is a by-product of phosphoric acid manufacture. The titaniferous sand is a residue from a mining industry. Both adsorbents were characterised by infrared spectroscopy and X-ray fluorescence to determine their compositions and physicochemical properties. The response surfaces, through the Box-Behnken model, were used to model and optimise various adsorption parameters, namely initial copper concentration (A: 60 - 200 mg/L), adsorbent dose (B: 0.1 - 0.6 g) and pH (C: 4 - 10). The copper removal efficiency (98.92%), after statistical analysis, was obtained under the following optimal conditions: an adsorbent dose of 0.55 g, an initial copper concentration of 197.25 mg/L and a pH of 9.85. The study of the effects of the operating parameters showed that they had a positive effect on the copper removal efficiency.
文摘In recent years, the discharge of dye-laden effluents from the textile industries into the aquatic environment has increased considerably. These industries are among the largest consumers of water. They generate huge amounts of pollutants from their huge discharge of toxic effluents and pose serious public health problems. So, this study focuses on the use of the mixture of titaniferous sand and attapulgite for the removal of methyl violet by adsorption in discontinuous mode. The different adsorbents were characterized by X-ray fluorescence spectroscopy and their different physico-chemical properties such as pH, zero charge potential, bulk and absolute density, porosity and specific surface area were determined. The response surfaces, through the Box-Behnken model, were used to model and optimize the operating conditions. The different factors studied were the ratio of titaniferous sand and attapulgite, the initial concentration of methyl violet and the pH. These vary between 1.25 and 8, 20 and 100 mg/L, 4 and 10 respectively. The results obtained after statistical analysis of the data show that the optimum mixture ratio is 2, the optimum concentration is 99.92 mg/L and the optimum pH is 9.88 corresponding to a maximum capacity of 5.52 mg/g and a maximum removal efficiency of 99.56%. The study of the effects of the different factors showed that the initial concentration of methyl violet and the pH significantly influence the adsorption capacity and the removal efficiency of the dye.
文摘Three beakers for removing Fe (II) in reconstituted water (doped with FeSO<sub>4</sub>) were built and tested. Given the set operating conditions ([O<sub>2</sub>] > 4 mg·L<sup>-1</sup>, P<sub>atm</sub> = 1.013 bar, T = 25°C ± 1°C and [Fe<sup>2+</sup>]<sub>0</sub> = 0.5 to 2 mg·L<sup>-1</sup>), removal of iron was caused by biological and possibly physical and chemical oxidation because there is a quantity of free oxygen in the medium. The extent of each type of oxidation has not been evaluated as it specifically studies the biological degradation of iron in these beaker tests by setting the operating conditions (pH > 6.5, dissolved oxygen from 0 to 8 mg·L<sup>-1</sup>, Redox Potential from 100 to 400 mV). The experimental studies focused particularly on the measurements of maximum wavelength, conversion efficiencies from Fe (II) to Fe (III), the effect of the Fe (II) concentration, the influence of pH, the action of the temperature of the prepared solutions and the effect of O<sub>2</sub> concentration under specified operating conditions. It noticed precipitated amounts of iron deposited at the bottom of the beakers. Thus, the low concentrations of Fe (II) detected in the influent after the biological oxidation operation could be attributed to microorganisms that consume iron as a substrate.
