This work reports on the use of the holmium oxide （Ho2O3） polymer film as a saturable absorber （SA） for generating stable Q-switching pulses operating in a 2μm region in a thulium-doped fiber laser cavity. The SA...This work reports on the use of the holmium oxide （Ho2O3） polymer film as a saturable absorber （SA） for generating stable Q-switching pulses operating in a 2μm region in a thulium-doped fiber laser cavity. The SA is prepared by diluting a commercial Ho3O2 powder and then mixing it with polyvinyI alcohol （PVA） solution to form a Ho2O3-PVA film. A tiny part of the film about 1mm×1 mm in size is sandwiched between two fiber ferrules with the help of index matching gel. When incorporated in a laser cavity driven by a 1552-nm pump, stable Q-switching pulses are observed at 1955nm within the pump power range of 363 491 roW. As the pmnp power increases within this range, the repetition rate rises from 26 kHz to 39 kHz, as the pulse width drops from 4.22μs to 2.57μs. The laser operates with a signal-to-noise ratio of 47dB, and the maximum output power and the pulse energy obtained are 2.67mW and 69ng, respectively. Our results successfully demonstrate that the Ho2O3 film can be used as a passive SA to generate a 2μm pulse laser.展开更多
We demonstrate a Q-switched erbium-doped fiber laser （EDFL） using a newly developed zinc oxide- （ZnO） based saturable absorber （SA）. The SA is fabricated by embedding a prepared ZnO powder into a poly（vinyl alc...We demonstrate a Q-switched erbium-doped fiber laser （EDFL） using a newly developed zinc oxide- （ZnO） based saturable absorber （SA）. The SA is fabricated by embedding a prepared ZnO powder into a poly（vinyl alcohol） film. A small piece of the film is then sandwiched between two fiber ferrules and is incorporated in an EDFL cavity for generating a stable Q-switching pulse train. The EDFL operates at 1560.4nm with a pump power threshold of 11.8mW, a pulse repetition rate tunable from 22.79 to 61.43kHz, and the smallest pulse width of 7.00 μs. The Q-switching pulse shows no spectral modulation with a peak-to-pedestal ratio of 62 dB indicating the high stability of the laser. These results show that the ZnO powder has a great potential to be used for pulsed laser applications.展开更多
文摘This work reports on the use of the holmium oxide （Ho2O3） polymer film as a saturable absorber （SA） for generating stable Q-switching pulses operating in a 2μm region in a thulium-doped fiber laser cavity. The SA is prepared by diluting a commercial Ho3O2 powder and then mixing it with polyvinyI alcohol （PVA） solution to form a Ho2O3-PVA film. A tiny part of the film about 1mm×1 mm in size is sandwiched between two fiber ferrules with the help of index matching gel. When incorporated in a laser cavity driven by a 1552-nm pump, stable Q-switching pulses are observed at 1955nm within the pump power range of 363 491 roW. As the pmnp power increases within this range, the repetition rate rises from 26 kHz to 39 kHz, as the pulse width drops from 4.22μs to 2.57μs. The laser operates with a signal-to-noise ratio of 47dB, and the maximum output power and the pulse energy obtained are 2.67mW and 69ng, respectively. Our results successfully demonstrate that the Ho2O3 film can be used as a passive SA to generate a 2μm pulse laser.
基金Supported by the University of Malaya under Grant No PG173-2015B
文摘We demonstrate a Q-switched erbium-doped fiber laser （EDFL） using a newly developed zinc oxide- （ZnO） based saturable absorber （SA）. The SA is fabricated by embedding a prepared ZnO powder into a poly（vinyl alcohol） film. A small piece of the film is then sandwiched between two fiber ferrules and is incorporated in an EDFL cavity for generating a stable Q-switching pulse train. The EDFL operates at 1560.4nm with a pump power threshold of 11.8mW, a pulse repetition rate tunable from 22.79 to 61.43kHz, and the smallest pulse width of 7.00 μs. The Q-switching pulse shows no spectral modulation with a peak-to-pedestal ratio of 62 dB indicating the high stability of the laser. These results show that the ZnO powder has a great potential to be used for pulsed laser applications.
