To explain the effect of joint roughness on joint peak shear strength(JPSS)and investigate the effect of different contact states of joint surface on JPSS,we try to clarify the physical mechanism of the effect of join...To explain the effect of joint roughness on joint peak shear strength(JPSS)and investigate the effect of different contact states of joint surface on JPSS,we try to clarify the physical mechanism of the effect of joint cavity percentage(JCP)on JPSS from the perspective of the three-dimensional(3D)distribution characteristics of the actual contact joint surface,and propose a JPSS model considering the JCP.Shear tests for red sandstone joints with three different surface morphologies and three different JCPs were performed under constant normal load condition.Based on test fitting results,the reduction effect of the JCP on JPSS is investigated,and a JPSS model for cavity-containing joints is obtained.However,the above model only considers the influence of JCP by fitting test data,and does not reveal the physical mechanism of JCP affecting the JPSS.Based on the peak dilation angle model for consideration of the actual contact joint morphology,and the influence of JCP on the roughness of the actual contact joint surface,a theoretical model of the JPSS considering the JCP is proposed.The derivation process does not depend on the test fitting,but is entirely based on the joint mechanical law,and its physical significance is clear.It is proposed that the essence of the influence of the JCP on JPSS is that the JCP first affects the normal stress of the actual contact joints,further affects the roughness of actual contact joints,and then affects the shear strength.展开更多
A consecutive joint shear strength model for soft rock joints is proposed in this paper,which takes into account the degradation law of the actual contact three-dimensional(3D)roughness.The essence of the degradation ...A consecutive joint shear strength model for soft rock joints is proposed in this paper,which takes into account the degradation law of the actual contact three-dimensional(3D)roughness.The essence of the degradation of the maximum possible dilation angle is the degradation of the 3D average equivalent dip angle of the actual contact joint asperities.Firstly,models for calculating the maximum possible dilation angle at the initial and residual shear stress stages are proposed by analyzing the 3D joint morphology characteristics of the corresponding shear stages.Secondly,the variation law of the maximum possible dilation angle is quantified by studying the degradation law of the joint micro convex body.Based on the variation law of the maximum possible dilation angle,the maximum possible shear strength model is proposed.Furthermore,a method to calculate the shear stiffness degradation in the plastic stage is proposed.According to the maximum possible shear strength of rock joints,the shear stress-shear displacement prediction model of rock joints is obtained.The new model reveals that there is a close relationship between joint shear strength and actual contact joint roughness,and the degradation of shear strength after the peak is due to the degradation of actual contact joint roughness.展开更多
This study aims at proposing a reasonable roughness parameter that can reflect the peak shear strength(PSS)of rock joints.Firstly,the contribution of the asperities with different apparent dip angles to shear strength...This study aims at proposing a reasonable roughness parameter that can reflect the peak shear strength(PSS)of rock joints.Firstly,the contribution of the asperities with different apparent dip angles to shear strength is studied.Then the shear strength of the entire joint asperities is derived.The results showed that the PSS of the entire joint asperities is proportional to a key parameter hs,which is related to the geometric character of the joint surface and the joint material properties.The parameter hsis taken as the new roughness parameter,and it is reasonable to associate the PSS with the geometric characteristics of the joint surface.Based on the new roughness parameter and shear test results of 20 sets of joint specimens,a new PSS model for rock joints is proposed.The new model is validated with the artificial joints in this paper and real rock joints in published studies.Results showed that it is suitable for different types of rock joints except for gneiss joints.The new model has the form of the Mohr-Coulomb model,which can directly reflect the relationship between the 3 D roughness parameters and the peak dilation angle.展开更多
基金supported by the National Natural Science Foundation of China (Nos.52208328 and 52104090)Open Research Fund Program of State Key Laboratory of Hydroscience and Engineering (No.sklhse-2021-C-06).
文摘To explain the effect of joint roughness on joint peak shear strength(JPSS)and investigate the effect of different contact states of joint surface on JPSS,we try to clarify the physical mechanism of the effect of joint cavity percentage(JCP)on JPSS from the perspective of the three-dimensional(3D)distribution characteristics of the actual contact joint surface,and propose a JPSS model considering the JCP.Shear tests for red sandstone joints with three different surface morphologies and three different JCPs were performed under constant normal load condition.Based on test fitting results,the reduction effect of the JCP on JPSS is investigated,and a JPSS model for cavity-containing joints is obtained.However,the above model only considers the influence of JCP by fitting test data,and does not reveal the physical mechanism of JCP affecting the JPSS.Based on the peak dilation angle model for consideration of the actual contact joint morphology,and the influence of JCP on the roughness of the actual contact joint surface,a theoretical model of the JPSS considering the JCP is proposed.The derivation process does not depend on the test fitting,but is entirely based on the joint mechanical law,and its physical significance is clear.It is proposed that the essence of the influence of the JCP on JPSS is that the JCP first affects the normal stress of the actual contact joints,further affects the roughness of actual contact joints,and then affects the shear strength.
基金National Natural Science Foundation of China(Nos.52208328 and 52104090)Innovation Fund Research Project of State Key Laboratory for GeoMechanics and Deep Underground Engineering(No.SKLGDUEK202201)Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering(No.Z020007).
文摘A consecutive joint shear strength model for soft rock joints is proposed in this paper,which takes into account the degradation law of the actual contact three-dimensional(3D)roughness.The essence of the degradation of the maximum possible dilation angle is the degradation of the 3D average equivalent dip angle of the actual contact joint asperities.Firstly,models for calculating the maximum possible dilation angle at the initial and residual shear stress stages are proposed by analyzing the 3D joint morphology characteristics of the corresponding shear stages.Secondly,the variation law of the maximum possible dilation angle is quantified by studying the degradation law of the joint micro convex body.Based on the variation law of the maximum possible dilation angle,the maximum possible shear strength model is proposed.Furthermore,a method to calculate the shear stiffness degradation in the plastic stage is proposed.According to the maximum possible shear strength of rock joints,the shear stress-shear displacement prediction model of rock joints is obtained.The new model reveals that there is a close relationship between joint shear strength and actual contact joint roughness,and the degradation of shear strength after the peak is due to the degradation of actual contact joint roughness.
基金supported by China Postdoctoral Science Foundation(No.2020M680007)Beijing Postdoctoral Research Foundation(No.2020-zz-087)+1 种基金National Natural Science Foundation of China(Nos.51478027 and 51174012)Fundamental Research Funds for Beijing Civil Engineering and Architecture(No.X20031)。
文摘This study aims at proposing a reasonable roughness parameter that can reflect the peak shear strength(PSS)of rock joints.Firstly,the contribution of the asperities with different apparent dip angles to shear strength is studied.Then the shear strength of the entire joint asperities is derived.The results showed that the PSS of the entire joint asperities is proportional to a key parameter hs,which is related to the geometric character of the joint surface and the joint material properties.The parameter hsis taken as the new roughness parameter,and it is reasonable to associate the PSS with the geometric characteristics of the joint surface.Based on the new roughness parameter and shear test results of 20 sets of joint specimens,a new PSS model for rock joints is proposed.The new model is validated with the artificial joints in this paper and real rock joints in published studies.Results showed that it is suitable for different types of rock joints except for gneiss joints.The new model has the form of the Mohr-Coulomb model,which can directly reflect the relationship between the 3 D roughness parameters and the peak dilation angle.
