By using the ultrasound-assisted liquid phase exfoliation method, Bi_2Te_3 nanosheets are synthesized and deposited onto a quartz plate to form a kind of saturable absorber(SA), in which nonlinear absorption propertie...By using the ultrasound-assisted liquid phase exfoliation method, Bi_2Te_3 nanosheets are synthesized and deposited onto a quartz plate to form a kind of saturable absorber(SA), in which nonlinear absorption properties around 2 μm are analyzed with a home-made mode-locked laser. With the as-prepared Bi_2Te_3 SA employed,a stable passively Q-switched all-solid-state 2 μm laser is successfully realized. Q-switched pulses with a maximum average output power of 2.03 W are generated under an output coupling of 5%, corresponding to the maximum single-pulse energy of 18.4 μJ and peak power of 23 W. The delivered shortest pulse duration and maximum repetition rate are 620 ns and 118 k Hz under an output coupling of 2%, respectively. It is the first presentation of such Bi_2Te_3 SA employed in a solid-state Q-switched crystalline laser at 2 μm, to the best of our knowledge. In comparison with other 2 D materials suitable for pulsed 2 μm lasers, the saturable absorption performance of Bi_2Te_3 SA is proved to be promising in generating high power and high-repetition-rate 2 μm laser pulses.展开更多
This article presents an efficient approach to classify a set of corn kernels in contact,which may contain good,or defective kernels along with impurities.The proposed approach consists of two stages,the first one is ...This article presents an efficient approach to classify a set of corn kernels in contact,which may contain good,or defective kernels along with impurities.The proposed approach consists of two stages,the first one is a next-generation segmentation network,trained by using a set of synthesized images that is applied to divide the given image into a set of individual instances.An ad-hoc lightweight CNN architecture is then proposed to classify each instance into one of three categories(ie good,defective,and impurities).The segmentation network is trained using a strategy that avoids the time-consuming and human-error-prone task of manual data annotation.Regarding the classification stage,the proposed ad-hoc network is designed with only a few sets of layers to result in a lightweight architecture capable of being used in integrated solutions.Experimental results and comparisons with previous approaches showing both the improvement in accuracy and the reduction in time are provided.Finally,the segmentation and classification approach proposed can be easily adapted for use with other cereal types.展开更多
A new multifunction thermo-mechanical simulator was successfully developed. The accuracy of measurement and control is very high through all digital control. More than twenty tests may be fulfilled including tension, ...A new multifunction thermo-mechanical simulator was successfully developed. The accuracy of measurement and control is very high through all digital control. More than twenty tests may be fulfilled including tension, compression, torsion, combination large deformation that meets the study of supersteel, etc. Its performance is introduced in the paper, such as designed ideas, machine structure, man-machine interface, control system, etc.展开更多
Objective: To study the distribution of human leptospirosis cases across the different geographic regions in the Philippines in 2015-2017 and to determine the relationship between the frequency of typhoon occurrence a...Objective: To study the distribution of human leptospirosis cases across the different geographic regions in the Philippines in 2015-2017 and to determine the relationship between the frequency of typhoon occurrence and human leptospirosis cases. Methods: Information on the frequency of leptospirosis cases and typhoon occurrence across the different regions in the Philippines from 2015 to 2017 was retrieved from the databases of the Department of Health and the Philippine Atmospheric, Geophysical, and Astronomical Services Administration, respectively. Descriptive measures on the prevalent cases and occurrence of typhoons across the different regions were summarized. Linear regression analysis was employed to establish the functional relationship between leptospirosis cases and typhoon occurrence. The distribution of human leptospirosis cases was assessed using the Poisson distribution. Results: The frequency of typhoon occurrence accounted for the significant linear variation in the geographic distribution of human leptospirosis cases in the Philippines(P<0.001). Moreover, the human leptospirosis cases obeyed a Poisson distribution(λ=6.89, P<0.001). Conclusions: The Philippines has frequently experienced severe weather perturbations such as typhoons resulting in flooding and subsequently increasing the risk of transmitting bacterial infections including leptospirosis. Information obtained regarding the determinants and distribution of human leptospirosis will provide better understanding of the disease propagation for subsequent design of optimal disease prevention measures, appropriate resource allocation, effective control strategies, and necessary public health programs.展开更多
The dynamic response of multiple coplanar interface cracks between two dissimilar piezoelectric strips subjected to mechanical and electrical impacts is investigated.Solutions to two kinds of electric boundary conditi...The dynamic response of multiple coplanar interface cracks between two dissimilar piezoelectric strips subjected to mechanical and electrical impacts is investigated.Solutions to two kinds of electric boundary conditions on crack surfaces,i.e.electric impermeable and electric permeable,are obtained.Laplace and Fourier transforms and dislocation density functions are employed to reduce the mixed boundary value problem to Cauchy singular integral equations, which can be solved numerically.The effects of electrical load,geometry criterion of piezoelectric strips,relative location of cracks and material properties on the dynamic energy release rate are examined.展开更多
This paper outlines a methodology to assess the seismic drift of reinforced concrete buildings with limited structural and geotechnical information. Based on the latest and the most advanced research on predicting pot...This paper outlines a methodology to assess the seismic drift of reinforced concrete buildings with limited structural and geotechnical information. Based on the latest and the most advanced research on predicting potential near-field and far field earthquakes affecting Hong Kong, the engineering response spectra for both rock and soil sites are derived. A new step-by-step procedure for displacement-based seismic hazard assessment of building structures is proposed to determine the maximum inter-storey drift demand for reinforced concrete buildings. The primary information required for this assessment is only the depth of the soft soil above bedrock and the height of the building. This procedure is further extended to assess the maximum chord rotation angle demand for the coupling beam of coupled shear wall or frame wall structures, which may be very critical when subjected to earthquake forces. An example is provided to illustrate calibration of the assessment procedure by using actual engineering structural models.展开更多
基金National Natural Science Foundation of China(NSFC)(61475088,61775119,61378022,61422511)Young Scholars Program of Shandong University(2015WLJH38)Open Research Fund of the State Key Laboratory of Pulsed Power Laser Technology,Electronic Engineering Institute,Hefei,China(SLK2016KF01)
文摘By using the ultrasound-assisted liquid phase exfoliation method, Bi_2Te_3 nanosheets are synthesized and deposited onto a quartz plate to form a kind of saturable absorber(SA), in which nonlinear absorption properties around 2 μm are analyzed with a home-made mode-locked laser. With the as-prepared Bi_2Te_3 SA employed,a stable passively Q-switched all-solid-state 2 μm laser is successfully realized. Q-switched pulses with a maximum average output power of 2.03 W are generated under an output coupling of 5%, corresponding to the maximum single-pulse energy of 18.4 μJ and peak power of 23 W. The delivered shortest pulse duration and maximum repetition rate are 620 ns and 118 k Hz under an output coupling of 2%, respectively. It is the first presentation of such Bi_2Te_3 SA employed in a solid-state Q-switched crystalline laser at 2 μm, to the best of our knowledge. In comparison with other 2 D materials suitable for pulsed 2 μm lasers, the saturable absorption performance of Bi_2Te_3 SA is proved to be promising in generating high power and high-repetition-rate 2 μm laser pulses.
基金Grant PID2021-128945NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by“ERDF A way of making Europe”the“CERCA Programme/Generalitat de Catalunya”the ESPOL project CIDIS-20-2021.
文摘This article presents an efficient approach to classify a set of corn kernels in contact,which may contain good,or defective kernels along with impurities.The proposed approach consists of two stages,the first one is a next-generation segmentation network,trained by using a set of synthesized images that is applied to divide the given image into a set of individual instances.An ad-hoc lightweight CNN architecture is then proposed to classify each instance into one of three categories(ie good,defective,and impurities).The segmentation network is trained using a strategy that avoids the time-consuming and human-error-prone task of manual data annotation.Regarding the classification stage,the proposed ad-hoc network is designed with only a few sets of layers to result in a lightweight architecture capable of being used in integrated solutions.Experimental results and comparisons with previous approaches showing both the improvement in accuracy and the reduction in time are provided.Finally,the segmentation and classification approach proposed can be easily adapted for use with other cereal types.
基金supported by the National Natural Science Foundation of China(No.50227401)
文摘A new multifunction thermo-mechanical simulator was successfully developed. The accuracy of measurement and control is very high through all digital control. More than twenty tests may be fulfilled including tension, compression, torsion, combination large deformation that meets the study of supersteel, etc. Its performance is introduced in the paper, such as designed ideas, machine structure, man-machine interface, control system, etc.
文摘Objective: To study the distribution of human leptospirosis cases across the different geographic regions in the Philippines in 2015-2017 and to determine the relationship between the frequency of typhoon occurrence and human leptospirosis cases. Methods: Information on the frequency of leptospirosis cases and typhoon occurrence across the different regions in the Philippines from 2015 to 2017 was retrieved from the databases of the Department of Health and the Philippine Atmospheric, Geophysical, and Astronomical Services Administration, respectively. Descriptive measures on the prevalent cases and occurrence of typhoons across the different regions were summarized. Linear regression analysis was employed to establish the functional relationship between leptospirosis cases and typhoon occurrence. The distribution of human leptospirosis cases was assessed using the Poisson distribution. Results: The frequency of typhoon occurrence accounted for the significant linear variation in the geographic distribution of human leptospirosis cases in the Philippines(P<0.001). Moreover, the human leptospirosis cases obeyed a Poisson distribution(λ=6.89, P<0.001). Conclusions: The Philippines has frequently experienced severe weather perturbations such as typhoons resulting in flooding and subsequently increasing the risk of transmitting bacterial infections including leptospirosis. Information obtained regarding the determinants and distribution of human leptospirosis will provide better understanding of the disease propagation for subsequent design of optimal disease prevention measures, appropriate resource allocation, effective control strategies, and necessary public health programs.
基金Project supported by the Research Grants Council of the Hong Kong Special Administrative Region,China(No.HKUT014/00E)the National Natural Science Foundation of China(No.19772029).
文摘The dynamic response of multiple coplanar interface cracks between two dissimilar piezoelectric strips subjected to mechanical and electrical impacts is investigated.Solutions to two kinds of electric boundary conditions on crack surfaces,i.e.electric impermeable and electric permeable,are obtained.Laplace and Fourier transforms and dislocation density functions are employed to reduce the mixed boundary value problem to Cauchy singular integral equations, which can be solved numerically.The effects of electrical load,geometry criterion of piezoelectric strips,relative location of cracks and material properties on the dynamic energy release rate are examined.
基金the Research Grants Council of Hong Kong Under Project No. HKU 7023/99E and HKU 7002/00EThe Ministry of Science and Technology of PRC and The Bureau of Science and Technology of Guangzhou Under Project No. 2004CCA03300 and No.2004Z1-E0051
文摘This paper outlines a methodology to assess the seismic drift of reinforced concrete buildings with limited structural and geotechnical information. Based on the latest and the most advanced research on predicting potential near-field and far field earthquakes affecting Hong Kong, the engineering response spectra for both rock and soil sites are derived. A new step-by-step procedure for displacement-based seismic hazard assessment of building structures is proposed to determine the maximum inter-storey drift demand for reinforced concrete buildings. The primary information required for this assessment is only the depth of the soft soil above bedrock and the height of the building. This procedure is further extended to assess the maximum chord rotation angle demand for the coupling beam of coupled shear wall or frame wall structures, which may be very critical when subjected to earthquake forces. An example is provided to illustrate calibration of the assessment procedure by using actual engineering structural models.
