Agronomic measures are the key to promote the sustainable development of ratoon rice by reducing the damage from mechanical crushing to the residual stubble of the main crop, thereby mitigating the impact on axillary ...Agronomic measures are the key to promote the sustainable development of ratoon rice by reducing the damage from mechanical crushing to the residual stubble of the main crop, thereby mitigating the impact on axillary bud sprouting and yield formation in ratoon rice. This study used widely recommended conventional rice Jiafuzhan and hybrid rice Yongyou 2640 as the test materials to conduct a four-factor block design field experiment in a greenhouse of the experimental farm of Fujian Agricultural and Forestry University, China from 2018 to 2019.The treatments included fertilization and no fertilization, alternate wetting and drying irrigation and continuous water flooding irrigation, and plots with and without artificial crushing damage on the rice stubble. At the same time, a 13C stable isotope in-situ detection technology was used to fertilize the pot experiment. The results showed significant interactions among varieties, water management, nitrogen application and stubble status.Relative to the long-term water flooding treatment, the treatment with sequential application of nitrogen fertilizer coupled with moderate field drought for root-vigor and tiller promotion before and after harvesting of the main crop, significantly improved the effective tillers from low position nodes. This in turn increased the effective panicles per plant and grains per panicle by reducing the influence of artificial crushing damage on rice stubble and achieving a high yield of the regenerated rice. Furthermore, the partitioning of 13C assimilates to the residual stubble and its axillary buds were significantly improved at the mature stage of the main crop, while the translocation rate to roots and rhizosphere soil was reduced at the later growth stage of ratooning season rice. This was triggered by the metabolism of hormones and polyamines at the stem base regulated by the interaction of water and fertilizer at this time. We therefore suggest that to achieve a high yield of ratoon rice with low stubble height under mechanized harvest展开更多
Many monoclonal antibodies(mAbs)have been extensively used in the clinic,such as rituximab to treat lymphoma.However,resistance and non-responsiveness to mAb treatment have been challenging for this line of therapy.Co...Many monoclonal antibodies(mAbs)have been extensively used in the clinic,such as rituximab to treat lymphoma.However,resistance and non-responsiveness to mAb treatment have been challenging for this line of therapy.Complement is one of the main mediators of antibody-based cancer therapy via the complement-dependent cytolysis(CDC)effect.CD59 plays a critical role in resistance to mAbs through the CDC effect.In this paper,we attempted to investigate whether the novel CD59 inhibitor,recombinant ILYd4,was effective in enhancing the rituximab-mediated CDC effect on rituximab-sensitive RL-7 lymphoma cells and rituximab-induced resistant RR51.2 cells.Meanwhile,the CDC effects,which were mediated by rituximab and anti-CD24 mAb,on the refractory multiple myeloma(MM)cell line ARH-77 and the solid tumor osteosarcoma cell line Saos-2,were respectively investigated.We found that rILYd4 rendered the refractory cells sensitive to the mAb-mediated CDC effect and that rILYd4 exhibited a synergistic effect with the mAb that resulted in tumor cells lysis.This effect on tumor cell lysis was apparent on both hematological tumors and solid tumors.Therefore,rILYd4 may serve as an adjuvant for mAb mediated-tumor immunotherapy.展开更多
Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing perform...Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing performance,silver coated porous carbon(Ag@PC)is synthesized by one-step hydro-thermal synthesis process making use of fir as a biomass formwork.Phase compositions,morphological structure,and microwave absorption capability of the Ag@PC has been explored.Research results show that the metallic Ag was successfully reduced and the particles are evenly distributed inward the pores of the carbon formwork,which accelerates graphitization process of the amorphous carbon.The Ag@PC composite without adding polyvinyl pyrrolidone(PVP)exhibits higher dielectric constant and better EM wave dissipating capability.This is because the larger particles of Ag give rise to higher electric conductivity.After combing with frequency selective surface(FSS),the EM wave absorbing performance is further improved and the frequency region below-10 d B is located in8.20-11.75 GHz,and the minimal reflection loss value is-22.5 dB.This work indicates that incorporating metallic Ag particles and FSS provides a valid way to strengthen EM wave absorbing capacity of PC material.展开更多
Polystyrene(PS)microspheres have the advantages of good stability,corrosion resistance and low density,which have a broad application prospect.In this paper,PS composite microspheres with 20%silver plating content wer...Polystyrene(PS)microspheres have the advantages of good stability,corrosion resistance and low density,which have a broad application prospect.In this paper,PS composite microspheres with 20%silver plating content were prepared by chemical plating method and incorporated into polydimethylsiloxane(PDMS)flexible matrix to prepare Ag@PS/PDMS flexible wave-absorbing materials.The electromagnetic parameters were adjusted to optimize the dielectric and wave-absorbing properties by varying the additional amount of Ag@PS composite microspheres in Ag@PS/PDMS composites.The X-ray diffraction(XRD)results proved the successful preparation of Ag@PS composite microspheres.The SEM and EDS images indicated that the Ag particles were attached to the external surface of PS.The presence of Ag particles in the Ag@PS composite microspheres enhances their electrical conductivity and enables the formation of a conductive network.This,in turn,improves the composites’dielectric constant.The optimal wave-absorbing capability of the composites was achieved when the Ag@PS composite microspheres were added at a weight percentage of 50%.When the sample attains a thickness of 1.8 mm,a reflection loss of at least-39.8 dB is attained at 10.4 GHz,along with a bandwidth of 1.6 GHz(9.1–10.7 GHz)for the effective absorption bandwidth(EAB).The pressure-sensitive properties of the pliable composites were investigated as well.The optimal pressure-sensitive performance of Ag@PS/PDMS composites was achieved with a 60 wt.% addition of Ag@PS composite microspheres.The resistance undergoes significant changes when subjected to pressure with a sensitivity of 9.7.The results indicate that the flexible composites’wave-absorption and pressuresensitivity properties can be modulated by adjusting the amount of Ag@PS composite microspheres added.展开更多
用于地磁测量的MEMS三轴磁阻传感器越来越普遍的应用到无人机上进行姿态测量,为提高磁测系统的测量精度需要对传感器误差进行分析和补偿。现采用了一种两步校准法,即首先利用基于最小二乘的椭球假设拟合法对三轴矢量磁传感器的零偏、灵...用于地磁测量的MEMS三轴磁阻传感器越来越普遍的应用到无人机上进行姿态测量,为提高磁测系统的测量精度需要对传感器误差进行分析和补偿。现采用了一种两步校准法,即首先利用基于最小二乘的椭球假设拟合法对三轴矢量磁传感器的零偏、灵敏度与不正交误差进行标定补偿,目的是得到准确正交的传感器坐标系;利用四位置法对标定后传感器坐标系与测量系统坐标系之间的安装误差进行校准,从而得到磁测系统坐标系下的准确测量数据。无磁转台实验表明:经两步法后测量的磁场模值误差均值由校准前的2 900 n T降低为900 n T,校准效果明显;测量系统单轴(Z轴)的误差均值由2 736 n T降低为49 n T,有效的验证了安装误差校准的正确性。通过实验数据比较得出此方法优于传统的摇摆法,实际操作简单,不需要高精度辅助设备,能够有效的应用于无人机姿态测量系统校准,提高姿态角解算精度。展开更多
针对室内定位系统中现有的行人航位推算(pedestrian dead reckoning,PDR)方法存在加速度计适用性较差,以及基于惯性和磁传感器的航向估计易受器件误差和磁场环境的影响,导致精度较低的问题,在不增加基础设施成本和现场勘察工作的前提下...针对室内定位系统中现有的行人航位推算(pedestrian dead reckoning,PDR)方法存在加速度计适用性较差,以及基于惯性和磁传感器的航向估计易受器件误差和磁场环境的影响,导致精度较低的问题,在不增加基础设施成本和现场勘察工作的前提下,提出一种调频(frequencymodulation,FM)广播信号辅助PDR的室内行人定位技术:在传播模型理论基础上探究FM信号接收信号强度指数(RSSI)与步长的关系,将其与加速度组合以提升步长估计的适用性;然后通过分析FM信号在直线/转弯运动模式下的变化,将其与角速度组合以提升模式识别准确率,并使用模式识别结果约束航向漂移误差;最后,综合步长与航向估计结果实现定位。实验结果表明,引入FM信号后定位误差均值可分别减小36.1%、78.9%。展开更多
基金supported by the National Nature Science Foundation of China,the National Key Research and Development Program of China(302001109,2016YFD0300508,2017YFD0301602,2018YFD0301105)the Fujian and Taiwan Cultivation Resources Development and Green Cultivation Coordination Innovation Center,China(Fujian 2011 Project,2015-75)the Natural Science Foundation of Fujian Province,China(2022J01142)。
文摘Agronomic measures are the key to promote the sustainable development of ratoon rice by reducing the damage from mechanical crushing to the residual stubble of the main crop, thereby mitigating the impact on axillary bud sprouting and yield formation in ratoon rice. This study used widely recommended conventional rice Jiafuzhan and hybrid rice Yongyou 2640 as the test materials to conduct a four-factor block design field experiment in a greenhouse of the experimental farm of Fujian Agricultural and Forestry University, China from 2018 to 2019.The treatments included fertilization and no fertilization, alternate wetting and drying irrigation and continuous water flooding irrigation, and plots with and without artificial crushing damage on the rice stubble. At the same time, a 13C stable isotope in-situ detection technology was used to fertilize the pot experiment. The results showed significant interactions among varieties, water management, nitrogen application and stubble status.Relative to the long-term water flooding treatment, the treatment with sequential application of nitrogen fertilizer coupled with moderate field drought for root-vigor and tiller promotion before and after harvesting of the main crop, significantly improved the effective tillers from low position nodes. This in turn increased the effective panicles per plant and grains per panicle by reducing the influence of artificial crushing damage on rice stubble and achieving a high yield of the regenerated rice. Furthermore, the partitioning of 13C assimilates to the residual stubble and its axillary buds were significantly improved at the mature stage of the main crop, while the translocation rate to roots and rhizosphere soil was reduced at the later growth stage of ratooning season rice. This was triggered by the metabolism of hormones and polyamines at the stem base regulated by the interaction of water and fertilizer at this time. We therefore suggest that to achieve a high yield of ratoon rice with low stubble height under mechanized harvest
基金the US NIH through grant RO1 AI061174(XBQ)grant R21 CA141324(XBQ)the Harvard Technology Development Accelerator Fund(XBQ),and the Fund of the China Scholarship Council No.2008638052(TY).
文摘Many monoclonal antibodies(mAbs)have been extensively used in the clinic,such as rituximab to treat lymphoma.However,resistance and non-responsiveness to mAb treatment have been challenging for this line of therapy.Complement is one of the main mediators of antibody-based cancer therapy via the complement-dependent cytolysis(CDC)effect.CD59 plays a critical role in resistance to mAbs through the CDC effect.In this paper,we attempted to investigate whether the novel CD59 inhibitor,recombinant ILYd4,was effective in enhancing the rituximab-mediated CDC effect on rituximab-sensitive RL-7 lymphoma cells and rituximab-induced resistant RR51.2 cells.Meanwhile,the CDC effects,which were mediated by rituximab and anti-CD24 mAb,on the refractory multiple myeloma(MM)cell line ARH-77 and the solid tumor osteosarcoma cell line Saos-2,were respectively investigated.We found that rILYd4 rendered the refractory cells sensitive to the mAb-mediated CDC effect and that rILYd4 exhibited a synergistic effect with the mAb that resulted in tumor cells lysis.This effect on tumor cell lysis was apparent on both hematological tumors and solid tumors.Therefore,rILYd4 may serve as an adjuvant for mAb mediated-tumor immunotherapy.
基金supported by National Natural Science Foundation of China(No.52103361)Shaanxi University Youth Outstanding Talents Support Plan,Scientific and Technological Plan Project of Xi’an Beilin District(No.GX2143)。
文摘Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing performance,silver coated porous carbon(Ag@PC)is synthesized by one-step hydro-thermal synthesis process making use of fir as a biomass formwork.Phase compositions,morphological structure,and microwave absorption capability of the Ag@PC has been explored.Research results show that the metallic Ag was successfully reduced and the particles are evenly distributed inward the pores of the carbon formwork,which accelerates graphitization process of the amorphous carbon.The Ag@PC composite without adding polyvinyl pyrrolidone(PVP)exhibits higher dielectric constant and better EM wave dissipating capability.This is because the larger particles of Ag give rise to higher electric conductivity.After combing with frequency selective surface(FSS),the EM wave absorbing performance is further improved and the frequency region below-10 d B is located in8.20-11.75 GHz,and the minimal reflection loss value is-22.5 dB.This work indicates that incorporating metallic Ag particles and FSS provides a valid way to strengthen EM wave absorbing capacity of PC material.
基金funded and supported by the National Natural Science Foundation of China(No.52103361)Shaanxi University Youth Outstanding Talents Support Plan.Scientific and Technological Plan Project of Xi’an Science and Technology Bureau(23GXFW0018,23KGDW0031-2022)Scientific and Technological Guidance Project of Xi’an Key Laboratory of Textile Composites(xafzfc-zd08).
文摘Polystyrene(PS)microspheres have the advantages of good stability,corrosion resistance and low density,which have a broad application prospect.In this paper,PS composite microspheres with 20%silver plating content were prepared by chemical plating method and incorporated into polydimethylsiloxane(PDMS)flexible matrix to prepare Ag@PS/PDMS flexible wave-absorbing materials.The electromagnetic parameters were adjusted to optimize the dielectric and wave-absorbing properties by varying the additional amount of Ag@PS composite microspheres in Ag@PS/PDMS composites.The X-ray diffraction(XRD)results proved the successful preparation of Ag@PS composite microspheres.The SEM and EDS images indicated that the Ag particles were attached to the external surface of PS.The presence of Ag particles in the Ag@PS composite microspheres enhances their electrical conductivity and enables the formation of a conductive network.This,in turn,improves the composites’dielectric constant.The optimal wave-absorbing capability of the composites was achieved when the Ag@PS composite microspheres were added at a weight percentage of 50%.When the sample attains a thickness of 1.8 mm,a reflection loss of at least-39.8 dB is attained at 10.4 GHz,along with a bandwidth of 1.6 GHz(9.1–10.7 GHz)for the effective absorption bandwidth(EAB).The pressure-sensitive properties of the pliable composites were investigated as well.The optimal pressure-sensitive performance of Ag@PS/PDMS composites was achieved with a 60 wt.% addition of Ag@PS composite microspheres.The resistance undergoes significant changes when subjected to pressure with a sensitivity of 9.7.The results indicate that the flexible composites’wave-absorption and pressuresensitivity properties can be modulated by adjusting the amount of Ag@PS composite microspheres added.
文摘用于地磁测量的MEMS三轴磁阻传感器越来越普遍的应用到无人机上进行姿态测量,为提高磁测系统的测量精度需要对传感器误差进行分析和补偿。现采用了一种两步校准法,即首先利用基于最小二乘的椭球假设拟合法对三轴矢量磁传感器的零偏、灵敏度与不正交误差进行标定补偿,目的是得到准确正交的传感器坐标系;利用四位置法对标定后传感器坐标系与测量系统坐标系之间的安装误差进行校准,从而得到磁测系统坐标系下的准确测量数据。无磁转台实验表明:经两步法后测量的磁场模值误差均值由校准前的2 900 n T降低为900 n T,校准效果明显;测量系统单轴(Z轴)的误差均值由2 736 n T降低为49 n T,有效的验证了安装误差校准的正确性。通过实验数据比较得出此方法优于传统的摇摆法,实际操作简单,不需要高精度辅助设备,能够有效的应用于无人机姿态测量系统校准,提高姿态角解算精度。
文摘针对室内定位系统中现有的行人航位推算(pedestrian dead reckoning,PDR)方法存在加速度计适用性较差,以及基于惯性和磁传感器的航向估计易受器件误差和磁场环境的影响,导致精度较低的问题,在不增加基础设施成本和现场勘察工作的前提下,提出一种调频(frequencymodulation,FM)广播信号辅助PDR的室内行人定位技术:在传播模型理论基础上探究FM信号接收信号强度指数(RSSI)与步长的关系,将其与加速度组合以提升步长估计的适用性;然后通过分析FM信号在直线/转弯运动模式下的变化,将其与角速度组合以提升模式识别准确率,并使用模式识别结果约束航向漂移误差;最后,综合步长与航向估计结果实现定位。实验结果表明,引入FM信号后定位误差均值可分别减小36.1%、78.9%。
