The authors have developed a large-signal simulation technique extending an in-house small-signal simulation code for analyzing a 94 GHz double-drift region impact avalanche transit time device based on silicon with a...The authors have developed a large-signal simulation technique extending an in-house small-signal simulation code for analyzing a 94 GHz double-drift region impact avalanche transit time device based on silicon with a non-sinusoidal voltage excitation and studied the effect of junction temperature between 300 and 550 K on the large-signal characteristics of the device for both continuous wave （CW） and pulsed modes of operation. Results show that the large-signal RF power output of the device in both CW and pulsed modes increases with the increase of voltage modulation factor up to 60%, but decreases sharply with further increase of voltage modulation factor for a particular junction temperature; while the same parameter increases with the increase of junction temperature for a particular voltage modulation factor. Heat sinks made of copper and type-IIA diamond are designed to carry out the steady-state and transient thermal analysis of the device operating in CW and pulsed modes respectively. Authors have adopted Olson＇s method to carry out the transient analysis of the device, which clearly establishes the superiority of type-IIA diamond over copper as the heat sink material of the device from the standpoint of the undesirable effect of frequency chirping due to thermal transients in the pulsed mode.展开更多
The authors have carried out the large-signal characterization ofsilicon-based double-drift region （DDR） impact avalanche transit time （IMPATT） devices designed to operate up to 0.5 THz using a large-signal simula...The authors have carried out the large-signal characterization ofsilicon-based double-drift region （DDR） impact avalanche transit time （IMPATT） devices designed to operate up to 0.5 THz using a large-signal simulation method developed by the authors based on non-sinusoidal voltage excitation. The effect of band-to-band tunneling as well as parasitic series resistance on the large-signal properties of DDR Si IMPATTs have also been studied at different mm-wave and THz frequencies. Large-signal simulation results show that DDR Si IMPATT is capable of delivering peak RF power of 633.69 mW with 7.95% conversion efficiency at 94 GHz for 50% voltage modulation, whereas peak RF power output and efficiency fall to 81.08 mW and 2.01% respectively at 0.5 THz for same voltage modulation. The simulation results are compared with the experimental results and are found to be in close agreement.展开更多
Large-signal （L-S） characterizations of double-drift region （DDR） impact avalanche transit time （IM- PATT） devices based on group III-V semiconductors such as wurtzite （Wz） GaN, GaAs and InP have been carried ...Large-signal （L-S） characterizations of double-drift region （DDR） impact avalanche transit time （IM- PATT） devices based on group III-V semiconductors such as wurtzite （Wz） GaN, GaAs and InP have been carried out at both millimeter-wave （mm-wave） and terahertz （THz） frequency bands. A L-S simulation technique based on a non-sinusoidal voltage excitation （NSVE） model developed by the authors has been used to obtain the high frequency properties of the above mentioned devices. The effect of band-to-band tunneling on the L-S properties of the device at different mm-wave and THz frequencies are also investigated. Similar studies are also carried out for DDR IMPATTs based on the most popular semiconductor material, i.e. Si, for the sake of comparison. A compara- tive study of the devices based on conventional semiconductor materials （i.e. GaAs, InP and Si） with those based on Wz-GaN shows significantly better performance capabilities of the latter at both mm-wave and THz frequencies.展开更多
An attempt is made in this paper to explore the potentiality of semiconducting type-IIb diamond as the base material of double-drift region（DDR） impact avalanche transit time（IMPATT） devices operating at both mill...An attempt is made in this paper to explore the potentiality of semiconducting type-IIb diamond as the base material of double-drift region（DDR） impact avalanche transit time（IMPATT） devices operating at both millimetre-wave（mm-wave） and terahertz（THz） frequencies. A rigorous large-signal（L-S） simulation based on the non-sinusoidal voltage excitation（NSVE） model developed earlier by the authors is used in this study. At first,a simulation study based on avalanche response time reveals that the upper cut-off frequency for DDR diamond IMPATTs is 1.5 THz, while the same for conventional DDR Si IMPATTs is much smaller, i.e. 0.5 THz. The L-S simulationresultsshowthattheDDRdiamondIMPATTdevicedeliversapeakRFpowerof7.79Wwithan18.17%conversion efficiency at 94 GHz; while at 1.5 THz, the peak power output and conversion efficiency decrease to6.19mWand8.17%respectively,taking50%voltagemodulation.AcomparativestudyofDDRIMPATTsbasedon diamond and Si shows that the former excels over the later as regards high frequency and high power performance at both mm-wave and THz frequency bands. The effect of band to band tunneling on the L-S properties of DDR diamond and Si IMPATTs has also been studied at different mm-wave and THz frequencies.展开更多
文摘The authors have developed a large-signal simulation technique extending an in-house small-signal simulation code for analyzing a 94 GHz double-drift region impact avalanche transit time device based on silicon with a non-sinusoidal voltage excitation and studied the effect of junction temperature between 300 and 550 K on the large-signal characteristics of the device for both continuous wave （CW） and pulsed modes of operation. Results show that the large-signal RF power output of the device in both CW and pulsed modes increases with the increase of voltage modulation factor up to 60%, but decreases sharply with further increase of voltage modulation factor for a particular junction temperature; while the same parameter increases with the increase of junction temperature for a particular voltage modulation factor. Heat sinks made of copper and type-IIA diamond are designed to carry out the steady-state and transient thermal analysis of the device operating in CW and pulsed modes respectively. Authors have adopted Olson＇s method to carry out the transient analysis of the device, which clearly establishes the superiority of type-IIA diamond over copper as the heat sink material of the device from the standpoint of the undesirable effect of frequency chirping due to thermal transients in the pulsed mode.
文摘The authors have carried out the large-signal characterization ofsilicon-based double-drift region （DDR） impact avalanche transit time （IMPATT） devices designed to operate up to 0.5 THz using a large-signal simulation method developed by the authors based on non-sinusoidal voltage excitation. The effect of band-to-band tunneling as well as parasitic series resistance on the large-signal properties of DDR Si IMPATTs have also been studied at different mm-wave and THz frequencies. Large-signal simulation results show that DDR Si IMPATT is capable of delivering peak RF power of 633.69 mW with 7.95% conversion efficiency at 94 GHz for 50% voltage modulation, whereas peak RF power output and efficiency fall to 81.08 mW and 2.01% respectively at 0.5 THz for same voltage modulation. The simulation results are compared with the experimental results and are found to be in close agreement.
文摘Large-signal （L-S） characterizations of double-drift region （DDR） impact avalanche transit time （IM- PATT） devices based on group III-V semiconductors such as wurtzite （Wz） GaN, GaAs and InP have been carried out at both millimeter-wave （mm-wave） and terahertz （THz） frequency bands. A L-S simulation technique based on a non-sinusoidal voltage excitation （NSVE） model developed by the authors has been used to obtain the high frequency properties of the above mentioned devices. The effect of band-to-band tunneling on the L-S properties of the device at different mm-wave and THz frequencies are also investigated. Similar studies are also carried out for DDR IMPATTs based on the most popular semiconductor material, i.e. Si, for the sake of comparison. A compara- tive study of the devices based on conventional semiconductor materials （i.e. GaAs, InP and Si） with those based on Wz-GaN shows significantly better performance capabilities of the latter at both mm-wave and THz frequencies.
文摘An attempt is made in this paper to explore the potentiality of semiconducting type-IIb diamond as the base material of double-drift region（DDR） impact avalanche transit time（IMPATT） devices operating at both millimetre-wave（mm-wave） and terahertz（THz） frequencies. A rigorous large-signal（L-S） simulation based on the non-sinusoidal voltage excitation（NSVE） model developed earlier by the authors is used in this study. At first,a simulation study based on avalanche response time reveals that the upper cut-off frequency for DDR diamond IMPATTs is 1.5 THz, while the same for conventional DDR Si IMPATTs is much smaller, i.e. 0.5 THz. The L-S simulationresultsshowthattheDDRdiamondIMPATTdevicedeliversapeakRFpowerof7.79Wwithan18.17%conversion efficiency at 94 GHz; while at 1.5 THz, the peak power output and conversion efficiency decrease to6.19mWand8.17%respectively,taking50%voltagemodulation.AcomparativestudyofDDRIMPATTsbasedon diamond and Si shows that the former excels over the later as regards high frequency and high power performance at both mm-wave and THz frequency bands. The effect of band to band tunneling on the L-S properties of DDR diamond and Si IMPATTs has also been studied at different mm-wave and THz frequencies.
