This paper reports geochemical and Pb-Sr-Nd isotopic compositions of the Indosinian Yangba (215 Ma),Nanyili (225 Ma) and Mopi granitoids from the Bikou block of the northwestern margin of the Yangtze plate. These gran...This paper reports geochemical and Pb-Sr-Nd isotopic compositions of the Indosinian Yangba (215 Ma),Nanyili (225 Ma) and Mopi granitoids from the Bikou block of the northwestern margin of the Yangtze plate. These granitoids are enriched in Al (Al2O3:14.56%―16.48%) and Sr (352 μg/g―1047 μg/g),and depleted in Y (<16 μg/g) and HREE (e.g. Yb<1.61 μg/g),resulting in high Sr/Y (36.3―150) and (La/Yb)N (7.8―36.3) ratios and strongly fractionationed REE patterns. The Indosinian granotoids show initial Sr isotopic ratios (ISr) from 0.70419 to 70752,εNd(t) values from-3.1 to -8.5,and initial Pb isotopic ratios 206Pb/204Pb=17.891-18.250,207Pb/204Pb=15.494-15.575,and 208Pb/204Pb=37.788-38.335. Their geochemi-cal signatures indicate that the granitoids are adakitic. However,they are distinct from some adakites,generated by partial melting of subducted oceanic slab and/or underplated basaltic lower crust,be-cause they have high K (K2O: 1.49%―3.84%) and evolved Nd isotopic compositions,with older Nd iso-topic model ages (TDM=1.06―1.83 Ga). Geochemical and Sr-Nd isotopic compositions suggest that the magmas of the Insoninian adakitic rocks in the Bikou block were derived from partial melting of thick-ened basaltic lower crust. Combined with regional analyses,a lithospheric delamination model after collision between the North China and South China plates can account for the Indosinian adakitic magma generation. On the other hand,based on the Pb-Sr-Nd isotopic probing to the magma sources of the adakitic rocks,it is suggested that there is an unexposed continent-type basement under the exposed Bikou Group volcanic rocks. This can constrain on the Bikou Group volcanic rocks not to be MORB-or OIB-type.展开更多
We analyzed 360 permanent and campaign GPS data from 1999 to 2017 in the southern Sichuan-Yunan block, and obtained crustal horizontal deformation in this region.Then, we derived the strain rate using a multi-scale sp...We analyzed 360 permanent and campaign GPS data from 1999 to 2017 in the southern Sichuan-Yunan block, and obtained crustal horizontal deformation in this region.Then, we derived the strain rate using a multi-scale spherical wavelet method.Results reveal a complex pattern of tectonic movement in the southern Sichuan-Yunnan block.Compared to the stable Eurasian plate, the maximum rate of the horizontal deformation in the southern Sichuan-Yunnan block is approximately 22 mm/a.The Xiaojiang fault shows a significantly lower deformation—a left-lateral strike-slip movement of 9.5 mm/a.The Honghe fault clearly shows a complex segmental deformation from the north to south.The northern Honghe fault shows 4.3 mm/a right strike-slip with 6.7 mm/a extension; the southern Honghe fault shows 1.9 mm/a right strike-slip with 1.9 mm/a extension; the junction zone in the Honghe and Lijiang–Xiaojinhe faults shows an obvious clockwise-rotation deformation.The strain calculation results reveal that the maximum shear-strain rate in this region reaches 70 nstrain/a, concentrated around the Xiaojiang fault and at the junction of the Honghe and Lijiang–Xiaojinhe faults.We note that most of the earthquakes with magnitudes of 4 and above that occurred in this region were within the high shear strain-rate zones and the strain rate gradient boundary zone, which indicates that the magnitude of strain accumulation is closely related to the seismic activities.Comparison of the fast shear-wave polarization direction of the upper-crust with the upper-mantle anisotropy and the direction of the surface principal compressive strain rate obtained from the inversion of the GPS data reveals that the direction of the surface principal compressive strain is basically consistent with the fast shear-wave polarization direction of the upper crust anisotropy, but different from the polarization direction of the upper mantle.Our results support the hypothesis that the principal elements of the deformation mechanism in the southern Sichuan-Yunnan block 展开更多
A brief review of recent progress in researches, productions and applications of full distributed fiber Raman photon sensors at China Jiliang University （CJLU） is presented. In order to improve the measurement dista...A brief review of recent progress in researches, productions and applications of full distributed fiber Raman photon sensors at China Jiliang University （CJLU） is presented. In order to improve the measurement distance, the accuracy, the space resolution, the ability of multi-parameter measurements, and the intelligence of full distributed fiber sensor systems, a new generation fiber sensor technology based on the optical fiber nonlinear scattering fusion principle is proposed. A series of new generation full distributed fiber sensors are investigated and designed, which consist of new generation ultra-long distance full distributed fiber Raman and Rayleigh scattering photon sensors integrated with a fiber Raman amplifier, auto-correction full distributed fiber Raman photon temperature sensors based on Raman correlation dual sources, full distributed fiber Raman photon temperature sensors based on a pulse coding source, full distributed fiber Raman photon temperature sensors using a fiber Raman wavelength shifter, a new type of Brillouin optical time domain analyzers （BOTDAs） integrated with a fiber Raman amplifier for replacing a fiber Brillouin amplifier, full distributed fiber Raman and Brillouin photon sensors integrated with a fiber Raman amplifier, and full distributed fiber Brillouin photon sensors integrated with a fiber Brillouin frequency shifter. The Internet of things is believed as one of candidates of the next technological revolution, which has driven hundreds of millions of class markets. Sensor networks are important components of the Internet of things. The full distributed optical fiber sensor network （Rayleigh, Raman, and Brillouin scattering） is a 3S （smart materials, smart structure, and smart skill） system, which is easy to construct smart fiber sensor networks. The distributed optical fiber sensor can be embedded in the power grids, railways, bridges, tunnels, roads, constructions, water supply systems, dams, oil and gas pipelines and other facilities, and can be integrate展开更多
An essential concept of cancer immunotherapy is that immunogenic cell death(ICD),characterized by the release of tumor-associated antigens(TAAs)and tumor-specific antigens(TSAs)like neoantigens,danger-associated molec...An essential concept of cancer immunotherapy is that immunogenic cell death(ICD),characterized by the release of tumor-associated antigens(TAAs)and tumor-specific antigens(TSAs)like neoantigens,danger-associated molecular patterns(DAMPs),and pro-inflammatory cytokines,facilitates the presentation of TAAs and TSAs to adaptive immune cells,eliciting an emerging or reinstating a pre-existing anti-cancer immune response.展开更多
The northeastern part of the Tibetan Plateau is a region where different tectonic blocks collide and intersect,and large earthquakes are frequent.Global Navigation Satellite System(GNSS)observations show that tectonic...The northeastern part of the Tibetan Plateau is a region where different tectonic blocks collide and intersect,and large earthquakes are frequent.Global Navigation Satellite System(GNSS)observations show that tectonic deformation in this region is strong and manifests as non-uniform deformation associated with tectonic features.S-wave splitting studies of near-field seismic data show that seismic anisotropy parameters can also reveal the upper crustal medium deformation beneath the reporting station.In this paper,we summarize the surface deformation from GNSS observations and crustal deformation from seismic anisotropy data in the northeastern Tibetan Plateau.By comparing the principal compressive strain direction with the fast S-wave polarization direction of near-field S-wave splitting,we analyzed deformation and its differences in surface and upper crustal media in the northeastern Tibetan Plateau and adjacent areas.The principal compressive strain direction derived from GNSS is generally consistent with the polarization direction of fast S-waves,but there are also local tectonic regions with large differences between them,which reflect the different deformation mechanisms of regional upper crustal media.The combination of GNSS and seismic anisotropy data can reveal the depth variation characteristics of crustal deformation and deepen understanding of three-dimensional crustal deformation and the deep dynamical mechanisms underlying it.it.展开更多
Mixed phase TiO2photocatalysts doped with C and Y were synthesized by a sol‐gel process.The effects of C and Y doping and annealing temperatures on the structural and optical properties,and photocatalytic activity we...Mixed phase TiO2photocatalysts doped with C and Y were synthesized by a sol‐gel process.The effects of C and Y doping and annealing temperatures on the structural and optical properties,and photocatalytic activity were investigated.We found that both C and Y doping can broaden the absorption spectrum of TiO2to the visible light region and inhibit recombination of photogenerated electron/hole pairs.The incorporation of Y into the TiO2lattice inhibited growth of crystalline grains,which increased the specific surface area and enhanced the photocatalytic activity.The photocatalytic performance of the samples was investigated in the photocatalytic degradation of methyl blue under visible light irradiation.The rate of methyl blue degradation over the(C,Y)‐co‐doped TiO2sample was much higher than those of undoped TiO2,C‐TiO2,and Y‐TiO2.Additionally,the apparent first‐order rate constant of the co‐doped sample was3.5times as large as that of undoped mix phase TiO2under the same experimental conditions.The enhanced photocatalytic activity can be attributed to the synergic effect of(C,Y)‐co‐doping and the formation of an appropriate crystalline structure.展开更多
基金Supported by the National Natural Science Foundation of China (Grant Nos. 40234052 and 40521001)the Program for Changjiang Scholars and Innovative Research Team in University (Grant No. IRT0441)
文摘This paper reports geochemical and Pb-Sr-Nd isotopic compositions of the Indosinian Yangba (215 Ma),Nanyili (225 Ma) and Mopi granitoids from the Bikou block of the northwestern margin of the Yangtze plate. These granitoids are enriched in Al (Al2O3:14.56%―16.48%) and Sr (352 μg/g―1047 μg/g),and depleted in Y (<16 μg/g) and HREE (e.g. Yb<1.61 μg/g),resulting in high Sr/Y (36.3―150) and (La/Yb)N (7.8―36.3) ratios and strongly fractionationed REE patterns. The Indosinian granotoids show initial Sr isotopic ratios (ISr) from 0.70419 to 70752,εNd(t) values from-3.1 to -8.5,and initial Pb isotopic ratios 206Pb/204Pb=17.891-18.250,207Pb/204Pb=15.494-15.575,and 208Pb/204Pb=37.788-38.335. Their geochemi-cal signatures indicate that the granitoids are adakitic. However,they are distinct from some adakites,generated by partial melting of subducted oceanic slab and/or underplated basaltic lower crust,be-cause they have high K (K2O: 1.49%―3.84%) and evolved Nd isotopic compositions,with older Nd iso-topic model ages (TDM=1.06―1.83 Ga). Geochemical and Sr-Nd isotopic compositions suggest that the magmas of the Insoninian adakitic rocks in the Bikou block were derived from partial melting of thick-ened basaltic lower crust. Combined with regional analyses,a lithospheric delamination model after collision between the North China and South China plates can account for the Indosinian adakitic magma generation. On the other hand,based on the Pb-Sr-Nd isotopic probing to the magma sources of the adakitic rocks,it is suggested that there is an unexposed continent-type basement under the exposed Bikou Group volcanic rocks. This can constrain on the Bikou Group volcanic rocks not to be MORB-or OIB-type.
基金supported by the National Natural Science Foundation of China (Project 41730212)the Basic Research Project of the Institute of Earthquake Forecasting, China Earthquake Administration (Grant No.2017IES0102, 2016IES0201)
文摘We analyzed 360 permanent and campaign GPS data from 1999 to 2017 in the southern Sichuan-Yunan block, and obtained crustal horizontal deformation in this region.Then, we derived the strain rate using a multi-scale spherical wavelet method.Results reveal a complex pattern of tectonic movement in the southern Sichuan-Yunnan block.Compared to the stable Eurasian plate, the maximum rate of the horizontal deformation in the southern Sichuan-Yunnan block is approximately 22 mm/a.The Xiaojiang fault shows a significantly lower deformation—a left-lateral strike-slip movement of 9.5 mm/a.The Honghe fault clearly shows a complex segmental deformation from the north to south.The northern Honghe fault shows 4.3 mm/a right strike-slip with 6.7 mm/a extension; the southern Honghe fault shows 1.9 mm/a right strike-slip with 1.9 mm/a extension; the junction zone in the Honghe and Lijiang–Xiaojinhe faults shows an obvious clockwise-rotation deformation.The strain calculation results reveal that the maximum shear-strain rate in this region reaches 70 nstrain/a, concentrated around the Xiaojiang fault and at the junction of the Honghe and Lijiang–Xiaojinhe faults.We note that most of the earthquakes with magnitudes of 4 and above that occurred in this region were within the high shear strain-rate zones and the strain rate gradient boundary zone, which indicates that the magnitude of strain accumulation is closely related to the seismic activities.Comparison of the fast shear-wave polarization direction of the upper-crust with the upper-mantle anisotropy and the direction of the surface principal compressive strain rate obtained from the inversion of the GPS data reveals that the direction of the surface principal compressive strain is basically consistent with the fast shear-wave polarization direction of the upper crust anisotropy, but different from the polarization direction of the upper mantle.Our results support the hypothesis that the principal elements of the deformation mechanism in the southern Sichuan-Yunnan block
文摘A brief review of recent progress in researches, productions and applications of full distributed fiber Raman photon sensors at China Jiliang University （CJLU） is presented. In order to improve the measurement distance, the accuracy, the space resolution, the ability of multi-parameter measurements, and the intelligence of full distributed fiber sensor systems, a new generation fiber sensor technology based on the optical fiber nonlinear scattering fusion principle is proposed. A series of new generation full distributed fiber sensors are investigated and designed, which consist of new generation ultra-long distance full distributed fiber Raman and Rayleigh scattering photon sensors integrated with a fiber Raman amplifier, auto-correction full distributed fiber Raman photon temperature sensors based on Raman correlation dual sources, full distributed fiber Raman photon temperature sensors based on a pulse coding source, full distributed fiber Raman photon temperature sensors using a fiber Raman wavelength shifter, a new type of Brillouin optical time domain analyzers （BOTDAs） integrated with a fiber Raman amplifier for replacing a fiber Brillouin amplifier, full distributed fiber Raman and Brillouin photon sensors integrated with a fiber Raman amplifier, and full distributed fiber Brillouin photon sensors integrated with a fiber Brillouin frequency shifter. The Internet of things is believed as one of candidates of the next technological revolution, which has driven hundreds of millions of class markets. Sensor networks are important components of the Internet of things. The full distributed optical fiber sensor network （Rayleigh, Raman, and Brillouin scattering） is a 3S （smart materials, smart structure, and smart skill） system, which is easy to construct smart fiber sensor networks. The distributed optical fiber sensor can be embedded in the power grids, railways, bridges, tunnels, roads, constructions, water supply systems, dams, oil and gas pipelines and other facilities, and can be integrate
基金The work was financially supported by the National Natural Science Foundation of China(Nos.81874233 and 51873207)the Natural Science Foundation of Hubei Province(No.2019CFB465).
文摘An essential concept of cancer immunotherapy is that immunogenic cell death(ICD),characterized by the release of tumor-associated antigens(TAAs)and tumor-specific antigens(TSAs)like neoantigens,danger-associated molecular patterns(DAMPs),and pro-inflammatory cytokines,facilitates the presentation of TAAs and TSAs to adaptive immune cells,eliciting an emerging or reinstating a pre-existing anti-cancer immune response.
基金supported by the National Natural Science Foundation of China(No.42074065)the basic research project of Institute of Earthquake Forecasting China Earthquake Administration(No.2021IEF0601)。
文摘The northeastern part of the Tibetan Plateau is a region where different tectonic blocks collide and intersect,and large earthquakes are frequent.Global Navigation Satellite System(GNSS)observations show that tectonic deformation in this region is strong and manifests as non-uniform deformation associated with tectonic features.S-wave splitting studies of near-field seismic data show that seismic anisotropy parameters can also reveal the upper crustal medium deformation beneath the reporting station.In this paper,we summarize the surface deformation from GNSS observations and crustal deformation from seismic anisotropy data in the northeastern Tibetan Plateau.By comparing the principal compressive strain direction with the fast S-wave polarization direction of near-field S-wave splitting,we analyzed deformation and its differences in surface and upper crustal media in the northeastern Tibetan Plateau and adjacent areas.The principal compressive strain direction derived from GNSS is generally consistent with the polarization direction of fast S-waves,but there are also local tectonic regions with large differences between them,which reflect the different deformation mechanisms of regional upper crustal media.The combination of GNSS and seismic anisotropy data can reveal the depth variation characteristics of crustal deformation and deepen understanding of three-dimensional crustal deformation and the deep dynamical mechanisms underlying it.it.
基金supported by the National High Technology Research and Development Program of China(863 Program,2015AA034601)the Natural Science Foundation of Yunnan Province(2016FB084)+1 种基金the Scientific Research Foundation of the Department of Education of Yunnan Province(2015Z003)the Open Fund of Yunnan Key Laboratory for Micro/nano Materials&Technology(ZZ2016006)~~
文摘Mixed phase TiO2photocatalysts doped with C and Y were synthesized by a sol‐gel process.The effects of C and Y doping and annealing temperatures on the structural and optical properties,and photocatalytic activity were investigated.We found that both C and Y doping can broaden the absorption spectrum of TiO2to the visible light region and inhibit recombination of photogenerated electron/hole pairs.The incorporation of Y into the TiO2lattice inhibited growth of crystalline grains,which increased the specific surface area and enhanced the photocatalytic activity.The photocatalytic performance of the samples was investigated in the photocatalytic degradation of methyl blue under visible light irradiation.The rate of methyl blue degradation over the(C,Y)‐co‐doped TiO2sample was much higher than those of undoped TiO2,C‐TiO2,and Y‐TiO2.Additionally,the apparent first‐order rate constant of the co‐doped sample was3.5times as large as that of undoped mix phase TiO2under the same experimental conditions.The enhanced photocatalytic activity can be attributed to the synergic effect of(C,Y)‐co‐doping and the formation of an appropriate crystalline structure.
