As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to ...As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to improve flotation performance of fine and ultrafine particles, there is still much more to be done. In this paper, the effects of nano-microbubbles （nanobuhbles and microbubbles） on the flotation of fine （-38 ＋ 14.36 μm） and ultrafine （-14.36 ＋ 5μm） chalcopyrite particles were investigated in a laboratory scale Denver flotation cell. Nano-microbubbles were generated using a specially-designed nano- microbubble generator based on the cavitation phenomenon in Venturi tubes. In order to better under- stand the mechanisms of nano-microbubble enhanced froth flotation of fine and ultrafine chalcopyrite particles, the nano-microbubble size distribution, stability and the effect of frother concentration on nano- bubble size were also studied by a laser diffraction method. Comparative flotation tests were performed in the presence and absence of nano-microbubbles to evaluate their impact on the fine and ultrafine chalcopyrite particle flotation recovery. According to the results, the mean size of nano-microbubbles increased over time, and decreased with increase of frother concentration. The laboratory-scale flotation test results indicated that flotation recovery of chalcopyrite fine and ultrafine particles increased by approximately 16-21% in the presence of nano-microbubbles, depending on operating conditions of the process. The presence of nano-microbubbles increased the recovery of ultrafine particles （-14.36 ＋ 5 μm） more than that of fine particles （-38 ＋ 14.36 μm）. Another major advantage is that the use of nano-microbubbles reduced the collector and frother consumptions by up to 75% and 50%, respectively.展开更多
This research aimed to enhance the column bioleaching recovery of uranium ore by Acidithiobacillus ferrooxidans.Seven factors were examined for their significance on bioleaching using a Plackett-Burman factorial desig...This research aimed to enhance the column bioleaching recovery of uranium ore by Acidithiobacillus ferrooxidans.Seven factors were examined for their significance on bioleaching using a Plackett-Burman factorial design.Four significant variables([Fe2+]initial,pH,aeration rate and inoculation percent)were selected for the optimization studies.The effect of these variables on uranium bioleaching was studied using a central composite design(CCD).The optimal values of the variables for the maximum uranium bioleaching recovery(90.27±0.98)%were as follows:[Fe2+]initial=2.89g/L,aeration rate420mL/min,pH1.45and inoculation6%(v/v).[Fe2+]initial was found to be the most effective parameter.The maximum uranium recovery from the predicted models was92.01%.This value was in agreement with the actual experimental value.The analysis of bioleaching residue of uranium ore under optimum conditions confirmed the formation of K-jarosite on the surface of minerals.By using optimal conditions,uranium bioleaching recovery is increased at column and jarosite precipitation is minimized.The kinetic model showed that uranium recovery has a direct relation with ferric ion concentration.展开更多
Growth room and glasshouse experiment was conducted to investigate the effect of constant and fluctuating tem- peratures on the development of Pasteuria penetrans a hyperparasite of root-knot nematodes. Tomato plants ...Growth room and glasshouse experiment was conducted to investigate the effect of constant and fluctuating tem- peratures on the development of Pasteuria penetrans a hyperparasite of root-knot nematodes. Tomato plants (Lycopersicon es- culentum Mill) were inoculated with Meloidogyne javanica second-stage juveniles attached with endospores of P. penetrans and were grown in growth room at 26?29 °C and in glasshouse at 20?32 °C. The tomato plants were sampled from the growth room after 600 degree-days based on 17 °C/d, accumulating each day above a base temperature of 10 °C and from the glasshouse after 36 calendar days. Temperature affected the development of P. penetrans directly. The rate of development at constant temperature in growth room was faster than that in the glasshouse at fluctuating temperatures.展开更多
Pasteuria penetrans will build-up faster where there is a high initial nematode density and can suppress root-knot nematode populations in the roots of tomato plants. The effect of different initial densities of nemat...Pasteuria penetrans will build-up faster where there is a high initial nematode density and can suppress root-knot nematode populations in the roots of tomato plants. The effect of different initial densities of nematode (Meloidogyne javanica)(150, 750, 1500, 3000) and P. penetrans infected females (F1, F3) densities (F0=control and AC=absolute control without nematode or P. penetrans inoculum) on the build-up of Pasteuria population was investigated over four crop cycles. Two major points of interest were highlighted. First, that within a confined soil volume, densities of P. penetrans can increase >100 times within 2 or 3 crop cycles. Second, from a relatively small amount of spore inoculum, infection of the host is very high. There were more infected females in the higher P. penetrans doses. The root growth data confirms the greater number of females in the controls particularly at the higher inoculum densities in the third and fourth crops. P. penetrans generally caused the fresh root weights to be higher than those in the control. P. penetrans has shown greater reduction of egg masses per plant at most densities.The effects of different initial densities of M. javanica and P. penetrans on the development of the pest and parasite populations were monitored. And no attempt was made to return the P. penetrans spores to the pots after each crop so the build-up in actual numbers of infected females and spores under natural conditions may be underestimated.展开更多
Objective:To determine the patterns of resistance to first line anti-tuberculosis(TB)drugs among a collection of Mycobacterium tuberculosis(MTB)isolates from 5 provinces of Iran.Methods:A total of the 6 426 clinical s...Objective:To determine the patterns of resistance to first line anti-tuberculosis(TB)drugs among a collection of Mycobacterium tuberculosis(MTB)isolates from 5 provinces of Iran.Methods:A total of the 6 426 clinical specimens from patients suspected of active TB were collected from March 2010 to June 2012.All specimens were subjected for microscopy and culture tests in the TB centers of studies provinces.Drug susceptibility testing to the first line anti-TB drugs for culture positive MTB was performed on Lwenstein-Jensen(LJ)medium using proportion method.Results:Of 6 426 clinical specimens,261 were culture positive for mycobacteria,of which 252 were MTB and 9 were MOTT(mycobacteria other than tuberculosis).Of 252 MTB isolates.211(83.7%)were pan-susceptible and 41(16.3%)were resistant to at least one drug.Resistance was most common to streptomycin.30 isolates(12.0%),followed by isoniuzid,20isolates(8.0%),rifampin,15 isolates(6.0%)and ethambutol,14 isolates(5.5%).Sixteen(6.3%)MTB isolates were MDR.A clear evidence of heterogeneity amongst the 5 provinces in the proportions with resistance to one or more drugs was observed[χ~2=12.209(4 degrees of freedom),P values=0.015 9].Conclusions:The prevalence of drug resistance in this study area underscoring the need for further enforcement of TB control strategies in the Iran.Drug susceptibility testing for all TB cases to provide optimal treatment,establishing advanced diagnostic facilities for rapid detection of MDR-TB and continuous monitoring of drug resistance are recommended for prevention and control of drug-resistant TB.展开更多
基金the Tarbiat Modares University (TMU), the Iran Mineral Processing Research Center (IMPRC) and the IMIDRO for the technical assistance and financial support
文摘As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to improve flotation performance of fine and ultrafine particles, there is still much more to be done. In this paper, the effects of nano-microbubbles （nanobuhbles and microbubbles） on the flotation of fine （-38 ＋ 14.36 μm） and ultrafine （-14.36 ＋ 5μm） chalcopyrite particles were investigated in a laboratory scale Denver flotation cell. Nano-microbubbles were generated using a specially-designed nano- microbubble generator based on the cavitation phenomenon in Venturi tubes. In order to better under- stand the mechanisms of nano-microbubble enhanced froth flotation of fine and ultrafine chalcopyrite particles, the nano-microbubble size distribution, stability and the effect of frother concentration on nano- bubble size were also studied by a laser diffraction method. Comparative flotation tests were performed in the presence and absence of nano-microbubbles to evaluate their impact on the fine and ultrafine chalcopyrite particle flotation recovery. According to the results, the mean size of nano-microbubbles increased over time, and decreased with increase of frother concentration. The laboratory-scale flotation test results indicated that flotation recovery of chalcopyrite fine and ultrafine particles increased by approximately 16-21% in the presence of nano-microbubbles, depending on operating conditions of the process. The presence of nano-microbubbles increased the recovery of ultrafine particles （-14.36 ＋ 5 μm） more than that of fine particles （-38 ＋ 14.36 μm）. Another major advantage is that the use of nano-microbubbles reduced the collector and frother consumptions by up to 75% and 50%, respectively.
基金the Tarbiat Modares University & Nuclear Science and Technology Research Institute for their financial support
文摘This research aimed to enhance the column bioleaching recovery of uranium ore by Acidithiobacillus ferrooxidans.Seven factors were examined for their significance on bioleaching using a Plackett-Burman factorial design.Four significant variables([Fe2+]initial,pH,aeration rate and inoculation percent)were selected for the optimization studies.The effect of these variables on uranium bioleaching was studied using a central composite design(CCD).The optimal values of the variables for the maximum uranium bioleaching recovery(90.27±0.98)%were as follows:[Fe2+]initial=2.89g/L,aeration rate420mL/min,pH1.45and inoculation6%(v/v).[Fe2+]initial was found to be the most effective parameter.The maximum uranium recovery from the predicted models was92.01%.This value was in agreement with the actual experimental value.The analysis of bioleaching residue of uranium ore under optimum conditions confirmed the formation of K-jarosite on the surface of minerals.By using optimal conditions,uranium bioleaching recovery is increased at column and jarosite precipitation is minimized.The kinetic model showed that uranium recovery has a direct relation with ferric ion concentration.
文摘Growth room and glasshouse experiment was conducted to investigate the effect of constant and fluctuating tem- peratures on the development of Pasteuria penetrans a hyperparasite of root-knot nematodes. Tomato plants (Lycopersicon es- culentum Mill) were inoculated with Meloidogyne javanica second-stage juveniles attached with endospores of P. penetrans and were grown in growth room at 26?29 °C and in glasshouse at 20?32 °C. The tomato plants were sampled from the growth room after 600 degree-days based on 17 °C/d, accumulating each day above a base temperature of 10 °C and from the glasshouse after 36 calendar days. Temperature affected the development of P. penetrans directly. The rate of development at constant temperature in growth room was faster than that in the glasshouse at fluctuating temperatures.
文摘Pasteuria penetrans will build-up faster where there is a high initial nematode density and can suppress root-knot nematode populations in the roots of tomato plants. The effect of different initial densities of nematode (Meloidogyne javanica)(150, 750, 1500, 3000) and P. penetrans infected females (F1, F3) densities (F0=control and AC=absolute control without nematode or P. penetrans inoculum) on the build-up of Pasteuria population was investigated over four crop cycles. Two major points of interest were highlighted. First, that within a confined soil volume, densities of P. penetrans can increase >100 times within 2 or 3 crop cycles. Second, from a relatively small amount of spore inoculum, infection of the host is very high. There were more infected females in the higher P. penetrans doses. The root growth data confirms the greater number of females in the controls particularly at the higher inoculum densities in the third and fourth crops. P. penetrans generally caused the fresh root weights to be higher than those in the control. P. penetrans has shown greater reduction of egg masses per plant at most densities.The effects of different initial densities of M. javanica and P. penetrans on the development of the pest and parasite populations were monitored. And no attempt was made to return the P. penetrans spores to the pots after each crop so the build-up in actual numbers of infected females and spores under natural conditions may be underestimated.
基金supported by project No.17108 from Tehran University of Medical Sciences
文摘Objective:To determine the patterns of resistance to first line anti-tuberculosis(TB)drugs among a collection of Mycobacterium tuberculosis(MTB)isolates from 5 provinces of Iran.Methods:A total of the 6 426 clinical specimens from patients suspected of active TB were collected from March 2010 to June 2012.All specimens were subjected for microscopy and culture tests in the TB centers of studies provinces.Drug susceptibility testing to the first line anti-TB drugs for culture positive MTB was performed on Lwenstein-Jensen(LJ)medium using proportion method.Results:Of 6 426 clinical specimens,261 were culture positive for mycobacteria,of which 252 were MTB and 9 were MOTT(mycobacteria other than tuberculosis).Of 252 MTB isolates.211(83.7%)were pan-susceptible and 41(16.3%)were resistant to at least one drug.Resistance was most common to streptomycin.30 isolates(12.0%),followed by isoniuzid,20isolates(8.0%),rifampin,15 isolates(6.0%)and ethambutol,14 isolates(5.5%).Sixteen(6.3%)MTB isolates were MDR.A clear evidence of heterogeneity amongst the 5 provinces in the proportions with resistance to one or more drugs was observed[χ~2=12.209(4 degrees of freedom),P values=0.015 9].Conclusions:The prevalence of drug resistance in this study area underscoring the need for further enforcement of TB control strategies in the Iran.Drug susceptibility testing for all TB cases to provide optimal treatment,establishing advanced diagnostic facilities for rapid detection of MDR-TB and continuous monitoring of drug resistance are recommended for prevention and control of drug-resistant TB.
