Coatings of metal matrix composites(Cu?WC)were fabricated by solid-state sintering.WC reinforcing particles indifferent quantities from5%up to30%(volume fraction)were mixed with Cu particles.After mixing,the powders w...Coatings of metal matrix composites(Cu?WC)were fabricated by solid-state sintering.WC reinforcing particles indifferent quantities from5%up to30%(volume fraction)were mixed with Cu particles.After mixing,the powders were poured ontothe surface of copper substrates.Sintering was carried out at1000°C under a reducing atmosphere in a vertical dilatometer.Sinteringkinetics was affected by both rigid substrates and WC particles which retarded the radial and axial densification of powders.However,the coatings were strongly attached to the substrate,and WC particles were randomly distributed within the matrix.The addition ofthe reinforcing particles enhanced the microhardness and reduced the volume loss in wear tests to1/17compared to the unreinforcedsample.The predominant wear mechanism was identified as abrasion at a load of5N.20%WC(volume fraction)reinforcingparticles led to the maximum values of properties for the composite coating.展开更多
Ti6Al4V powders with three different particle size distributions(0–20, 20–45, and 45–75 μm) were used to evaluate the effect of the particle size distribution on the solid-state sintering and their mechanical prop...Ti6Al4V powders with three different particle size distributions(0–20, 20–45, and 45–75 μm) were used to evaluate the effect of the particle size distribution on the solid-state sintering and their mechanical properties. The sintering kinetics was determined by dilatometry at temperatures from 900 to 1260°C. The mechanical properties of the sintered samples were evaluated by microhardness and compression tests. The sintering kinetics indicated that the predominant mechanism depends on the relative density irrespective of the particle size used. The mechanical properties of the sintered samples are adversely affected by increasing pore volume fraction. The elastic Young's modulus and yield stress follow a power law function of the relative density. The fracture behavior after compression is linked to the neck size developed during sintering, exhibiting two different mechanisms of failure: interparticle neck breaking and intergranular cracking in samples with relative densities below and above of 90%, respectively. The main conclusion is that relative density is responsible for the kinetics, mechanical properties, and failure behavior of Ti6 Al4 V powders.展开更多
Objectives: In the present study, we set out to establish whether executive function in everyday life is impaired in obsessive-compulsive disorder patients, and if it is more impaired (or not) in patients who relapsed...Objectives: In the present study, we set out to establish whether executive function in everyday life is impaired in obsessive-compulsive disorder patients, and if it is more impaired (or not) in patients who relapsed after cognitive behavioural therapy than in treatment-na?ve obsessive-compulsive disorder patients. Method: The Behavior Rating Inventory of Executive Function— Adult Version (BRIEF-A) was used to measure executive function in everyday life in three groups of 19 participants: treatment-na?ve obsessive-compulsive disorderpatients, obsessive-compulsive disorder patients having relapsed after CBT, and healthy controls. Results: The BRIEF-A results revealed an impairment in executive function in the treatment-na?ve and relapsed obsessive-compulsive disorder groups, relative to the healthy control group. There was no significant difference in executive function between the two groups of patients. Conclusions: These results show that impaired executive function is not associated with relapse in patients with obsessive-compulsive disorder having undergone cognitive behavioural therapy.展开更多
Objectives: Our aim was to compare the effects of an unwanted intrusive thought on executive function in a group of people with Obsessive Compulsive Disorder (OCD) and in a healthy group. Method: The Behavior Rating I...Objectives: Our aim was to compare the effects of an unwanted intrusive thought on executive function in a group of people with Obsessive Compulsive Disorder (OCD) and in a healthy group. Method: The Behavior Rating Inventory of Executive Function Adult (BRIEF-A) was used to measure executive dysfunction in everyday life in people with OCD. The study participants underwent either an intrusive thought induction or neutral thought induction prior to the administration of three computer-based tests of executive function. Results: The BRIEF-A results confirmed the impairment of executive function in everyday life for patients with OCD. In the number-letter task, patients with OCD displayed a longer reaction time (relative to the controls). There were no intergroup differences in the local-global task. In the go/no-go task, there was a significant impairment (p = 0.03) in the OCD group (with more commission errors than controls). There was a non-significant trend towards an effect of thought induction in both groups in the number-letter task. However, intrusive thought induction did not have a greater effect than neutral thought induction on the OCD group in any of the tasks. Conclusions: Intrusive thought induction has no effect on executive function in the two groups. The two groups differed with regard to two executive tasks.展开更多
基金CONACy T through the project CB-167111the Scientific Research Department of the UMSNH and the Guadalajara University for the financial support and the facilities to develop this study
文摘Coatings of metal matrix composites(Cu?WC)were fabricated by solid-state sintering.WC reinforcing particles indifferent quantities from5%up to30%(volume fraction)were mixed with Cu particles.After mixing,the powders were poured ontothe surface of copper substrates.Sintering was carried out at1000°C under a reducing atmosphere in a vertical dilatometer.Sinteringkinetics was affected by both rigid substrates and WC particles which retarded the radial and axial densification of powders.However,the coatings were strongly attached to the substrate,and WC particles were randomly distributed within the matrix.The addition ofthe reinforcing particles enhanced the microhardness and reduced the volume loss in wear tests to1/17compared to the unreinforcedsample.The predominant wear mechanism was identified as abrasion at a load of5N.20%WC(volume fraction)reinforcingparticles led to the maximum values of properties for the composite coating.
基金the National Laboratory SEDEAM-National Council for Science and Technology (CONACYT)ECOS M15P01 for the financial support and the facilities to develop this study
文摘Ti6Al4V powders with three different particle size distributions(0–20, 20–45, and 45–75 μm) were used to evaluate the effect of the particle size distribution on the solid-state sintering and their mechanical properties. The sintering kinetics was determined by dilatometry at temperatures from 900 to 1260°C. The mechanical properties of the sintered samples were evaluated by microhardness and compression tests. The sintering kinetics indicated that the predominant mechanism depends on the relative density irrespective of the particle size used. The mechanical properties of the sintered samples are adversely affected by increasing pore volume fraction. The elastic Young's modulus and yield stress follow a power law function of the relative density. The fracture behavior after compression is linked to the neck size developed during sintering, exhibiting two different mechanisms of failure: interparticle neck breaking and intergranular cracking in samples with relative densities below and above of 90%, respectively. The main conclusion is that relative density is responsible for the kinetics, mechanical properties, and failure behavior of Ti6 Al4 V powders.
文摘Objectives: In the present study, we set out to establish whether executive function in everyday life is impaired in obsessive-compulsive disorder patients, and if it is more impaired (or not) in patients who relapsed after cognitive behavioural therapy than in treatment-na?ve obsessive-compulsive disorder patients. Method: The Behavior Rating Inventory of Executive Function— Adult Version (BRIEF-A) was used to measure executive function in everyday life in three groups of 19 participants: treatment-na?ve obsessive-compulsive disorderpatients, obsessive-compulsive disorder patients having relapsed after CBT, and healthy controls. Results: The BRIEF-A results revealed an impairment in executive function in the treatment-na?ve and relapsed obsessive-compulsive disorder groups, relative to the healthy control group. There was no significant difference in executive function between the two groups of patients. Conclusions: These results show that impaired executive function is not associated with relapse in patients with obsessive-compulsive disorder having undergone cognitive behavioural therapy.
文摘Objectives: Our aim was to compare the effects of an unwanted intrusive thought on executive function in a group of people with Obsessive Compulsive Disorder (OCD) and in a healthy group. Method: The Behavior Rating Inventory of Executive Function Adult (BRIEF-A) was used to measure executive dysfunction in everyday life in people with OCD. The study participants underwent either an intrusive thought induction or neutral thought induction prior to the administration of three computer-based tests of executive function. Results: The BRIEF-A results confirmed the impairment of executive function in everyday life for patients with OCD. In the number-letter task, patients with OCD displayed a longer reaction time (relative to the controls). There were no intergroup differences in the local-global task. In the go/no-go task, there was a significant impairment (p = 0.03) in the OCD group (with more commission errors than controls). There was a non-significant trend towards an effect of thought induction in both groups in the number-letter task. However, intrusive thought induction did not have a greater effect than neutral thought induction on the OCD group in any of the tasks. Conclusions: Intrusive thought induction has no effect on executive function in the two groups. The two groups differed with regard to two executive tasks.
