Refractory alloys such as tungsten and molybdenum based alloys with high strength,thermal/electrical conductivity,low coefficient of thermal expansion and excellent creep resistances are highly desirable for applicati...Refractory alloys such as tungsten and molybdenum based alloys with high strength,thermal/electrical conductivity,low coefficient of thermal expansion and excellent creep resistances are highly desirable for applications in nuclear facilities,critical components in aerospace and defense components.However,the serious embrittlement limits the engineering usability of some refractory alloys.A lot of research results indicate that the performances of refractory alloys are closely related to the physical/chemical status,such as the interface dimension,interface type,interface composition of their grain boundaries(GBs),phase boundaries(PBs)and other interface features.This paper reviewed the recent progress of simulations and experiments on interface design strategies that achieve high performance refractory alloys.These strategies include GB interface purifying/strengthening,PB interface strengthening and PB/GB synergistic strengthening.Great details are provided on the design/fabrication strategy such as GB interface controlling,PB interface controlling and synergistic control of multi-scaled interfaces.The corresponding performances such as the mechanical property,thermal conductivity,thermal load resistance,thermal stability,irradiation resistance,and oxidation resistance are reviewed in the aspect to the effect of interfaces.In addition,the relationships between these interfaces and material properties are discussed.Finally,future developments and potential new research directions for refractory alloys are proposed.展开更多
With the addition of a thin Zn interlayer, 2.4 mm thick Mg-3AI-1Zn alloy sheets were friction stir spot welded （FSSW） using a pinless tool with fiat, convex and concave shoulder shapes. The results showed that an al...With the addition of a thin Zn interlayer, 2.4 mm thick Mg-3AI-1Zn alloy sheets were friction stir spot welded （FSSW） using a pinless tool with fiat, convex and concave shoulder shapes. The results showed that an alloying reaction took place between the Mg substrate and Zn interlayer during FSSW, forming a discontinuous intermetallics layer composed of dispersive （α-Mg ＋ MgZn） eutectic structure under- neath the shoulder and a Mg-Zn intermetallics bonding zone at the outside of the joints. This alloying reaction increased the bonded area and eliminated the hook defects, thereby producing sound FSSWjoints with a shallow keyhole without hook defects. The increase of plunge depth was beneficial to the Mg-Zn diffusion, thereby increasing the tensile-shear load of the joints. However, excessive plunge depths re- sulted in a decrease of the effective sheet thickness, reducing the strength of the joints. At a small plunge depth, the convex and concave shoulders were more beneficial to the interface reaction than the fiat shoul- der. The maximum joint load of 6.6 kN was achieved by using the concave shoulder at a plunge depth of 1.0 mm. A post-welding heat treatment promoted the dissolution of the discontinuous reaction layer in the joints; however, it led to the occurrence of void defects, influencing the bonding strength.展开更多
The tortuosity factor is the most critical parameter for the pore characteristic of porous materials. The tortuosity factor for porous FeAl intermetallics was studied based on the Darcy law and Hagen-Poiseuille equati...The tortuosity factor is the most critical parameter for the pore characteristic of porous materials. The tortuosity factor for porous FeAl intermetallics was studied based on the Darcy law and Hagen-Poiseuille equation. Porous stainless steel with the same pore structure parameter as porous FeAl was fabricated by powder metallurgy method for comparison. The results show that the tortuosity factor of porous FeAl intermetallics is smaller than that of porous stainless steel when their pore structure parameters are the same. The average tortuosity factor is 2.26 for the porous FeAl material and 2.92 for the porous stainless steel, calculated by Hagen-Poiseuille equation. The reason of the different tortuosity factors for porous FeAl and porous stainless steel was also explored through studying the pore formation mechanisms of the two types of porous materials.展开更多
Despite the great efforts dedicated to metallic glasses （MGs）, their structure still remains a mystery to be understood. With comparison to the existing mJciomechanical models, such as the free-volume and shear tran...Despite the great efforts dedicated to metallic glasses （MGs）, their structure still remains a mystery to be understood. With comparison to the existing mJciomechanical models, such as the free-volume and shear transformation zone （STZ） models, we first discuss in this article our recently proposed ＇core-shell＇ model, which contains a solid-like matrix and liquid-like inclusions. This serves as the theoretical basis to understand the structural heterogeneity in MGs in our analytical framework. After that, a scanning ultrafast nanoindentation technique is used to map out the structure heterogeneity in a Zr-based bulk metallic glass （BMG）. With these ongoing research efforts, we hope that more research work could be stimulated in the pursuit of the structure-property relation in MGs.展开更多
L12-strengthened high entropy alloys(HEAs)with excellent room and high-temperature mechanical prop-erties have been proposed as promising candidates as structural materials for advanced nuclear systems.However,knowled...L12-strengthened high entropy alloys(HEAs)with excellent room and high-temperature mechanical prop-erties have been proposed as promising candidates as structural materials for advanced nuclear systems.However,knowledge about their radiation response is fairly limited.In the present work,a novel HEA with a high density of L12 nanoparticles was irradiated with He ion at 500°C.Transmission electron microscope(TEM)and atom probe tomography(APT)were employed to study the evolution of mi-crostructural stability and radiation-induced segregation.Similar to the single-phase FeCoNiCr HEA,the main microstructural features were numerous large faulted dislocation loops and helium bubbles.While the irradiation resistance of the present L12-strengthened HEA is much improved in terms of reduced bubble size,which could be attributed to the considerable He trapping efficiency of the coherent pre-cipitate/matrix interface and the enhanced capability of the interface for damage elimination when the matrix channel width is narrow.APT analysis revealed that an inverse-Kirkendall-mechanism-dominated radiation-induced segregation(RIS)occurs around bubbles,where a significant Co enrichment and Ni de-pletion can be clearly observed.In addition,the competing dynamics of ballistic mixing and elemental clustering that raised from the irradiation-enhanced diffusion in a highly supersaturated matrix,along with the low precipitation nucleation barrier due to the small lattice misfit,lead to a dynamical pre-cipitation dissolution and re-precipitation appears under irradiation.Such a promising phenomenon is expected to promote a potential self-healing effect and could in turn provide a sustainable irradiation tolerance over the operational lifetime of a reactor.展开更多
A newly designed TiAl alloy containing W,Nb,and B was produced through magnetic-flotation-melting method.Mass production of this TiAl-based alloy,15 kg ingot size,which is quite different from the 0.05 kg small ingot ...A newly designed TiAl alloy containing W,Nb,and B was produced through magnetic-flotation-melting method.Mass production of this TiAl-based alloy,15 kg ingot size,which is quite different from the 0.05 kg small ingot produced by arc-melting,has a large effect on the metallurgical properties,such as the grain size and the phase structures of the alloy.Heat treatments were carefully designed in order to reduce the amount of the high-temperature remaining β phase in the alloy,and to obtain optimal microstructures for mechanical behavior studies.A room-temperature ductility of 1.9% was obtained in the cast TiAl-based alloy after the appropriate heat treatment.The mechanical behavior of the large ingot through mass production of the TiAl-based alloy was largely improved by the alloy design and subsequent heat treatments.展开更多
Al-free ZK60 magnesium (Mg) alloy sheet was selected as substrate material of Mg-steel pinless friction stir spot welding (FSSW), avoiding the effect of the Al element in the substrate on the alloying reaction of Mg-i...Al-free ZK60 magnesium (Mg) alloy sheet was selected as substrate material of Mg-steel pinless friction stir spot welding (FSSW), avoiding the effect of the Al element in the substrate on the alloying reaction of Mg-iron (Fe) interface. The sound FSSW joint of ZK60 Mg alloy and Q235 steel with a hot-dipped aluminum (Al)-containing zinc (Zn) coating was successfully realized. The detailed microstructural examinations proved that Al5Fe2 phase at the Mg-Fe interface came from the pre-existing Al5Fe2 phase in the coating and acted as the transition layer for promoting the metallurgical bonding of Mg and Fe. The interfaces with well-matched lattice sites among Fe, Al5Fe2 and Mg were formed during FSSW. A low energy interface with good match of lattice sites ((002)Al5Fe2//(110)Fe, [110]Al5Fe2//[113]Fe) between Al5Fe2 and Fe was identified. For the interface between Al5Fe2 and Mg, an orientation relationship of (622)Al5Fe2//(3112)Mgand[158]Al5Fe2//[2423]Mg was observed. The tensile-shear load of the ZK60-steel joint could reach 4.6 kN. Moreover, the joint fracture occurred at the interface between the Al5Fe2 layer and the Mg alloy substrate, suggesting the brittle fracture characteristic.展开更多
The melting temperature and critical transition temperature Tc of YBa2Cu3O7-δ with deferent content additives of PbO and BaPbO3 were studied. When PbO was doped in YBa2Cu3O7-δ, the melting temperature of YBa2Cu3O7-...The melting temperature and critical transition temperature Tc of YBa2Cu3O7-δ with deferent content additives of PbO and BaPbO3 were studied. When PbO was doped in YBa2Cu3O7-δ, the melting temperature of YBa2Cu3O7-δ was reduced, however its superconductivity was weakened. From the XRD pattern of the sintered mixture of YBa2Cu3O7-δ and PbO, it was known that there was a reaction between YBa2Cu3O7-δ and PbO, and the product was BaPbO3. Hence different contents of BaPbO3 (10mass%, 20mass% and 30mass%) were added in YBa2Cu3O7-δ. It was proved that there were no reactions between YBa2Cu3O7-δ and BaPbO3. And the superconductivity of the mixtures was much better than that of the samples with PbO additive.展开更多
The porosity and mechanical properties of GH4169(a precipitation strengthened nickel-base superalloy)specimens fabricated using the laser melting deposition technique at different laser powers were investigated.The re...The porosity and mechanical properties of GH4169(a precipitation strengthened nickel-base superalloy)specimens fabricated using the laser melting deposition technique at different laser powers were investigated.The results showed that the dendritic structure with the Laves phase and carbides embedded in the Ni-γ matrix formed in the as-fabricated GH4169 due to the strong temperature gradient and the high cooling rates.Porosity remarkably decreased first and slightly increased subsequently as the laser power increased from 300 to 800 W.The lowest porosity of the specimens characterized by 3D X-ray tomography is 0.28%.The specimens fabricated at 600 W tensiled along the direction perpendicular to the building direction exhibit the average yield strength of 587 MPa,the ultimate tensile strength of 903 MPa,and the elongation at fracture of 13.6%.Furthermore,the fatigue limit of the 600 W fabricated specimens is 173.7 MPa corresponding to the fatigue ratio of 0.1.And the relationship among the porosity,laser power and mechanical properties is discussed.展开更多
Mechanical properties were tested for in situ TiB2/A357 composite fabricated by LSM (mixed salts reaction) method. Micro structures of as cast and plastic deformed TiB2/A357 were investigated. The results show that th...Mechanical properties were tested for in situ TiB2/A357 composite fabricated by LSM (mixed salts reaction) method. Micro structures of as cast and plastic deformed TiB2/A357 were investigated. The results show that there is a low misfit between (200) Al and (101)TiB2 with [011]//Al [101]TiB2. There is a change from fully dendritic structure of the α-Al of A357 to a rosette-type structure of TiB2/A357. Significant increases in proof stress and Young's modulus can be obtained at low TiB2 additions. There exist dislocation loops around neighboring TiB2 particles with about 0.1μm in diameter and dislocation multiplication near TiB2 particles.展开更多
The grain boundary character distribution(GBCD) optimization and its effect on the intergranular stress corrosion cracking(IGSCC) resistance in a cold-rolled and subsequently annealed Fe-18 Cr-17 Mn-2 Mo-0.85 N high-n...The grain boundary character distribution(GBCD) optimization and its effect on the intergranular stress corrosion cracking(IGSCC) resistance in a cold-rolled and subsequently annealed Fe-18 Cr-17 Mn-2 Mo-0.85 N high-nitrogen nickel-free austenitic stainless steel were systematically explored.The results show that stacking faults and planar slip bands appearing at the right amount of deformation(lower than 10%) are beneficial cold-rolled microstructures to the GBCD optimization.The proportion of special boundaries gradually increases in the subsequent stages of recrystallization and grain growth,accompanying with the growth of twin-related domain in the experimental steel.In this way,the fraction of low ∑ coincidence site lattice(CSL) boundaries can reach as high as 82.85% for the specimen cold-rolled by 5% and then annealed at 1423 K for 72 h.After GBCD optimization,low ∑ CSL boundaries and the special triple junctions(J2,J3) of high proportion can greatly hinder the nitride precipitation along grain boundaries and enhance the capability for intergranular crack arrest,thus improving the IGSCC resistance of the experimental steel.展开更多
A comprehensive review of low temperature environmental embrittlement in intermetallics is pres- ented. Moisture and hydrogen are shown to severely embrittle many intermetallics, including iron, nickel and titanium al...A comprehensive review of low temperature environmental embrittlement in intermetallics is pres- ented. Moisture and hydrogen are shown to severely embrittle many intermetallics, including iron, nickel and titanium aluminides. The roles of composition, microstructure and external test variables are emphasized. Several methods to reduce or avoid embrittlement are described.展开更多
There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B fac...There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B factories, and the observation of an intriguing proton-antiproton threshold enhancement and the possibly related X(1835) meson state at BESⅢ, as well as the threshold measurements of charm mesons and charm baryons. We present a detailed survey of the important topics in tau-charm physics and hadron physics that can be further explored at BESⅢ during the remaining operation period of BEPCⅡ. This survey will help in the optimization of the data-taking plan over the coming years, and provides physics motivation for the possible upgrade of BEPCⅡ to higher luminosity.展开更多
Using a dedicated data sample taken in 2018 on the J/ψpeak,we perform a detailed study of the trigger efficiencies of the BESIII detector.The efficiencies are determined from three representative physics processes,na...Using a dedicated data sample taken in 2018 on the J/ψpeak,we perform a detailed study of the trigger efficiencies of the BESIII detector.The efficiencies are determined from three representative physics processes,namely Bhabha scattering,dimuon production and generic hadronic events with charged particles.The combined efficiency of all active triggers approaches 100%in most cases,with uncertainties small enough not to affect most physics analyses.展开更多
The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of...The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or higher.The STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard Model.The STCF project in China is under development with an extensive R&D program.This document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&D and physics case studies.展开更多
The changes in the mechanical properties of gas hydrate-bearing sediments(GHBS) induced by gas hydrate(GH) dissociation are essential to the evaluation of GH exploration and stratum instabilities. Previous studies pre...The changes in the mechanical properties of gas hydrate-bearing sediments(GHBS) induced by gas hydrate(GH) dissociation are essential to the evaluation of GH exploration and stratum instabilities. Previous studies present substantial mechanical data and constitutive models for GHBS at a given GH saturation under the non-dissociated condition. In this paper, GHBS was formed by the gas saturated method, GH was dissociated by depressurization until the GH saturation reached different dissociation degrees. The stress–strain curves were measured using triaxial tests at a same pore gas pressure and different confining pressures. The results show that the shear strength decreases progressively by 30%–90% of the initial value with GH dissociation, and the modulus decreases by 50% –75%. Simplified relationships for the modulus, cohesion, and internal friction angle with GH dissociated saturation were presented.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.:51771184,11735015,51801203,51771181)the Natural Science Foundation of Anhui Province(Grant No.1808085QE132)+2 种基金the Open Project of State Key Laboratory of Environment friendly Energy Materials(18kfhg02)a fund from the Science and Technology on Surface Physics and Chemistry Laboratory(Grant No.JZX7Y201901SY00900103)the Innovation Center of Nuclear Materials for National Defense Industry。
文摘Refractory alloys such as tungsten and molybdenum based alloys with high strength,thermal/electrical conductivity,low coefficient of thermal expansion and excellent creep resistances are highly desirable for applications in nuclear facilities,critical components in aerospace and defense components.However,the serious embrittlement limits the engineering usability of some refractory alloys.A lot of research results indicate that the performances of refractory alloys are closely related to the physical/chemical status,such as the interface dimension,interface type,interface composition of their grain boundaries(GBs),phase boundaries(PBs)and other interface features.This paper reviewed the recent progress of simulations and experiments on interface design strategies that achieve high performance refractory alloys.These strategies include GB interface purifying/strengthening,PB interface strengthening and PB/GB synergistic strengthening.Great details are provided on the design/fabrication strategy such as GB interface controlling,PB interface controlling and synergistic control of multi-scaled interfaces.The corresponding performances such as the mechanical property,thermal conductivity,thermal load resistance,thermal stability,irradiation resistance,and oxidation resistance are reviewed in the aspect to the effect of interfaces.In addition,the relationships between these interfaces and material properties are discussed.Finally,future developments and potential new research directions for refractory alloys are proposed.
基金supported by the National R&D Program of China under Grant No.2011BAE22B05Liaoning Province Doctor Startup Fund Program No.20131087the National Natural Science Foundation of China under Grant Nos.51371179 and 51331008
文摘With the addition of a thin Zn interlayer, 2.4 mm thick Mg-3AI-1Zn alloy sheets were friction stir spot welded （FSSW） using a pinless tool with fiat, convex and concave shoulder shapes. The results showed that an alloying reaction took place between the Mg substrate and Zn interlayer during FSSW, forming a discontinuous intermetallics layer composed of dispersive （α-Mg ＋ MgZn） eutectic structure under- neath the shoulder and a Mg-Zn intermetallics bonding zone at the outside of the joints. This alloying reaction increased the bonded area and eliminated the hook defects, thereby producing sound FSSWjoints with a shallow keyhole without hook defects. The increase of plunge depth was beneficial to the Mg-Zn diffusion, thereby increasing the tensile-shear load of the joints. However, excessive plunge depths re- sulted in a decrease of the effective sheet thickness, reducing the strength of the joints. At a small plunge depth, the convex and concave shoulders were more beneficial to the interface reaction than the fiat shoul- der. The maximum joint load of 6.6 kN was achieved by using the concave shoulder at a plunge depth of 1.0 mm. A post-welding heat treatment promoted the dissolution of the discontinuous reaction layer in the joints; however, it led to the occurrence of void defects, influencing the bonding strength.
基金Project (2009CB623406) supported by the National Basic Research Program of ChinaProjects (50825102, 50721003, 51071178) supported by the National Natural Science Foundation of China+1 种基金Project (11JJ4036) supported by the Natural Science Foundation of Hunan Province, ChinaProject supported by the Central South University Free Exploring Project, China
文摘The tortuosity factor is the most critical parameter for the pore characteristic of porous materials. The tortuosity factor for porous FeAl intermetallics was studied based on the Darcy law and Hagen-Poiseuille equation. Porous stainless steel with the same pore structure parameter as porous FeAl was fabricated by powder metallurgy method for comparison. The results show that the tortuosity factor of porous FeAl intermetallics is smaller than that of porous stainless steel when their pore structure parameters are the same. The average tortuosity factor is 2.26 for the porous FeAl material and 2.92 for the porous stainless steel, calculated by Hagen-Poiseuille equation. The reason of the different tortuosity factors for porous FeAl and porous stainless steel was also explored through studying the pore formation mechanisms of the two types of porous materials.
基金support provided by City University of Hong Kong (CityU) through the start-up grant for newly recruited faculty members (Project No. 7200303)the research of C.T. Liu is also supported by CityU (Project No. CityU117612)
文摘Despite the great efforts dedicated to metallic glasses （MGs）, their structure still remains a mystery to be understood. With comparison to the existing mJciomechanical models, such as the free-volume and shear transformation zone （STZ） models, we first discuss in this article our recently proposed ＇core-shell＇ model, which contains a solid-like matrix and liquid-like inclusions. This serves as the theoretical basis to understand the structural heterogeneity in MGs in our analytical framework. After that, a scanning ultrafast nanoindentation technique is used to map out the structure heterogeneity in a Zr-based bulk metallic glass （BMG）. With these ongoing research efforts, we hope that more research work could be stimulated in the pursuit of the structure-property relation in MGs.
文摘L12-strengthened high entropy alloys(HEAs)with excellent room and high-temperature mechanical prop-erties have been proposed as promising candidates as structural materials for advanced nuclear systems.However,knowledge about their radiation response is fairly limited.In the present work,a novel HEA with a high density of L12 nanoparticles was irradiated with He ion at 500°C.Transmission electron microscope(TEM)and atom probe tomography(APT)were employed to study the evolution of mi-crostructural stability and radiation-induced segregation.Similar to the single-phase FeCoNiCr HEA,the main microstructural features were numerous large faulted dislocation loops and helium bubbles.While the irradiation resistance of the present L12-strengthened HEA is much improved in terms of reduced bubble size,which could be attributed to the considerable He trapping efficiency of the coherent pre-cipitate/matrix interface and the enhanced capability of the interface for damage elimination when the matrix channel width is narrow.APT analysis revealed that an inverse-Kirkendall-mechanism-dominated radiation-induced segregation(RIS)occurs around bubbles,where a significant Co enrichment and Ni de-pletion can be clearly observed.In addition,the competing dynamics of ballistic mixing and elemental clustering that raised from the irradiation-enhanced diffusion in a highly supersaturated matrix,along with the low precipitation nucleation barrier due to the small lattice misfit,lead to a dynamical pre-cipitation dissolution and re-precipitation appears under irradiation.Such a promising phenomenon is expected to promote a potential self-healing effect and could in turn provide a sustainable irradiation tolerance over the operational lifetime of a reactor.
基金Project(11X-SP173V) supported by the U.S. Fossil Energy Materials ProgramProject supported by the U.S. National Science Foundation Combined Research-Curriculum Development(CRCD) ProgramProject(DE-AC05-00OR-22725 UT-Battelle,LLC) supported by Division of Materials Science and Engineering,Office of Basic Energy Science,U.S.Department of Energy
文摘A newly designed TiAl alloy containing W,Nb,and B was produced through magnetic-flotation-melting method.Mass production of this TiAl-based alloy,15 kg ingot size,which is quite different from the 0.05 kg small ingot produced by arc-melting,has a large effect on the metallurgical properties,such as the grain size and the phase structures of the alloy.Heat treatments were carefully designed in order to reduce the amount of the high-temperature remaining β phase in the alloy,and to obtain optimal microstructures for mechanical behavior studies.A room-temperature ductility of 1.9% was obtained in the cast TiAl-based alloy after the appropriate heat treatment.The mechanical behavior of the large ingot through mass production of the TiAl-based alloy was largely improved by the alloy design and subsequent heat treatments.
基金This work was supported financially by the National Natural Science Foundation of China(Nos.51601121,51371179 and 51331008)Electron microscopy experiments were carried out at the Center for Microanalysis of Materials at the Frederick Seitz Materials Research Laboratory of University of Illinois at Urbana-Champaign,and supported by Department of Energy Basic Energy Sciences(No.DEFG02-01ER45923)。
文摘Al-free ZK60 magnesium (Mg) alloy sheet was selected as substrate material of Mg-steel pinless friction stir spot welding (FSSW), avoiding the effect of the Al element in the substrate on the alloying reaction of Mg-iron (Fe) interface. The sound FSSW joint of ZK60 Mg alloy and Q235 steel with a hot-dipped aluminum (Al)-containing zinc (Zn) coating was successfully realized. The detailed microstructural examinations proved that Al5Fe2 phase at the Mg-Fe interface came from the pre-existing Al5Fe2 phase in the coating and acted as the transition layer for promoting the metallurgical bonding of Mg and Fe. The interfaces with well-matched lattice sites among Fe, Al5Fe2 and Mg were formed during FSSW. A low energy interface with good match of lattice sites ((002)Al5Fe2//(110)Fe, [110]Al5Fe2//[113]Fe) between Al5Fe2 and Fe was identified. For the interface between Al5Fe2 and Mg, an orientation relationship of (622)Al5Fe2//(3112)Mgand[158]Al5Fe2//[2423]Mg was observed. The tensile-shear load of the ZK60-steel joint could reach 4.6 kN. Moreover, the joint fracture occurred at the interface between the Al5Fe2 layer and the Mg alloy substrate, suggesting the brittle fracture characteristic.
文摘The melting temperature and critical transition temperature Tc of YBa2Cu3O7-δ with deferent content additives of PbO and BaPbO3 were studied. When PbO was doped in YBa2Cu3O7-δ, the melting temperature of YBa2Cu3O7-δ was reduced, however its superconductivity was weakened. From the XRD pattern of the sintered mixture of YBa2Cu3O7-δ and PbO, it was known that there was a reaction between YBa2Cu3O7-δ and PbO, and the product was BaPbO3. Hence different contents of BaPbO3 (10mass%, 20mass% and 30mass%) were added in YBa2Cu3O7-δ. It was proved that there were no reactions between YBa2Cu3O7-δ and BaPbO3. And the superconductivity of the mixtures was much better than that of the samples with PbO additive.
基金This work was financially supported by the National Key R&D Program of China(Grant No.2017YFB0305800)the National Natural Science Foundation of China(NSFC,Grant No.51771207)the Joint Founds of NSFC Liaoning(Grant No.U1508213).
文摘The porosity and mechanical properties of GH4169(a precipitation strengthened nickel-base superalloy)specimens fabricated using the laser melting deposition technique at different laser powers were investigated.The results showed that the dendritic structure with the Laves phase and carbides embedded in the Ni-γ matrix formed in the as-fabricated GH4169 due to the strong temperature gradient and the high cooling rates.Porosity remarkably decreased first and slightly increased subsequently as the laser power increased from 300 to 800 W.The lowest porosity of the specimens characterized by 3D X-ray tomography is 0.28%.The specimens fabricated at 600 W tensiled along the direction perpendicular to the building direction exhibit the average yield strength of 587 MPa,the ultimate tensile strength of 903 MPa,and the elongation at fracture of 13.6%.Furthermore,the fatigue limit of the 600 W fabricated specimens is 173.7 MPa corresponding to the fatigue ratio of 0.1.And the relationship among the porosity,laser power and mechanical properties is discussed.
文摘Mechanical properties were tested for in situ TiB2/A357 composite fabricated by LSM (mixed salts reaction) method. Micro structures of as cast and plastic deformed TiB2/A357 were investigated. The results show that there is a low misfit between (200) Al and (101)TiB2 with [011]//Al [101]TiB2. There is a change from fully dendritic structure of the α-Al of A357 to a rosette-type structure of TiB2/A357. Significant increases in proof stress and Young's modulus can be obtained at low TiB2 additions. There exist dislocation loops around neighboring TiB2 particles with about 0.1μm in diameter and dislocation multiplication near TiB2 particles.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51871048 and 52171108)the Fundamental Research Funds for the Central Universities(Grant Nos.N2002014 and N2202011)。
文摘The grain boundary character distribution(GBCD) optimization and its effect on the intergranular stress corrosion cracking(IGSCC) resistance in a cold-rolled and subsequently annealed Fe-18 Cr-17 Mn-2 Mo-0.85 N high-nitrogen nickel-free austenitic stainless steel were systematically explored.The results show that stacking faults and planar slip bands appearing at the right amount of deformation(lower than 10%) are beneficial cold-rolled microstructures to the GBCD optimization.The proportion of special boundaries gradually increases in the subsequent stages of recrystallization and grain growth,accompanying with the growth of twin-related domain in the experimental steel.In this way,the fraction of low ∑ coincidence site lattice(CSL) boundaries can reach as high as 82.85% for the specimen cold-rolled by 5% and then annealed at 1423 K for 72 h.After GBCD optimization,low ∑ CSL boundaries and the special triple junctions(J2,J3) of high proportion can greatly hinder the nitride precipitation along grain boundaries and enhance the capability for intergranular crack arrest,thus improving the IGSCC resistance of the experimental steel.
文摘A comprehensive review of low temperature environmental embrittlement in intermetallics is pres- ented. Moisture and hydrogen are shown to severely embrittle many intermetallics, including iron, nickel and titanium aluminides. The roles of composition, microstructure and external test variables are emphasized. Several methods to reduce or avoid embrittlement are described.
基金Supported in part by National Key Basic Research Program of China (2015CB856700)National Natural Science Foundation of China (NSFC) (11335008,11425524, 11625523, 11635010, 11735014, 11822506, 11935018)+18 种基金the Chinese Academy of Sciences (CAS) Large-Scale Scientific Facility Programthe CAS Center for Excellence in Particle Physics (CCEPP)Joint Large-Scale Scientific Facility Funds of the NSFC and CAS (U1532257, U1532258, U1732263)CAS Key Research Program of Frontier Science (QYZDJ-SSW-SLH003, QYZDJ-SSW-SLH040)100 Talents Program of CASCAS PIFIthe Thousand Talents Program of ChinaIN-PAC and Shanghai Key Laboratory for Particle Physics and CosmologyGerman Research Foundation DFG under Contracts NosCollaborative Research Center CRC 1044, FOR 2359Istituto Nazionale di Fisica Nucleare, ItalyKoninklijke Nederlandse Akademie van Wetenschappen (KNAW) (530-4CDP03)Ministry of Development of Turkey (DPT2006K-120470)National Science and Technology fundThe Knut and Alice Wallenberg Foundation (Sweden) (2016.0157)The Swedish Research CouncilU. S. Department of Energy (DE-FG02-05ER41374, DESC-0010118, DE-SC-0012069)University of Groningen (Ru G) and the Helmholtzzentrum fuer Schwerionenforschung Gmb H (GSI), Darmstadtthe Russian Ministry of Science and Higher Education (14.W03.31.0026).
文摘There has recently been a dramatic renewal of interest in hadron spectroscopy and charm physics. This renaissance has been driven in part by the discovery of a plethora of charmonium-like XYZ states at BESⅢ and B factories, and the observation of an intriguing proton-antiproton threshold enhancement and the possibly related X(1835) meson state at BESⅢ, as well as the threshold measurements of charm mesons and charm baryons. We present a detailed survey of the important topics in tau-charm physics and hadron physics that can be further explored at BESⅢ during the remaining operation period of BEPCⅡ. This survey will help in the optimization of the data-taking plan over the coming years, and provides physics motivation for the possible upgrade of BEPCⅡ to higher luminosity.
基金Supported in part by National Key Basic Research Program of China(2015CB856700)National Natural Science Foundation of China(NSFC)(11625523,11635010,11735014,11822506,11835012,11935015,11935016,11935018,11961141012)+15 种基金the Chinese Academy of Sciences(CAS)Large-Scale Scientific Facility ProgramJoint Large-Scale Scientific Facility Funds of the NSFC and CAS(U 1732263,U 1832207)CAS Key Research Program of Frontier Sciences(QYZDJ-SSWSLH003,QYZDJ-SSW-SLH040)100 Talents Program of CASINPAC and Shanghai Key Laboratory for Particle Physics and CosmologyERC(758462)German Research Foundation DFG under Contracts Nos.Collaborative Research Center CRC 1044,FOR 2359Istituto Nazionale di Fisica Nucleare,ItalyMinistry of Development o f Turkey(DPT2006K-120470)National Science and Technology fundOlle Engkvist Foundation(200-0605)STFC(United Kingdom)The Knut and Alice Wallenberg Foundation(Sweden)(2016.0157)The Royal Society,UK(DH140054,DH160214)The Swedish Research CouncilU.S.Department of Energy(DEFG02-05ER41374,DE-SC-0012069)。
文摘Using a dedicated data sample taken in 2018 on the J/ψpeak,we perform a detailed study of the trigger efficiencies of the BESIII detector.The efficiencies are determined from three representative physics processes,namely Bhabha scattering,dimuon production and generic hadronic events with charged particles.The combined efficiency of all active triggers approaches 100%in most cases,with uncertainties small enough not to affect most physics analyses.
基金supported by the National Key R&D Program of China under Contract No.2022YFA1602200the International Partnership Program of the Chineses Academy of Sciences under Grant No.211134KYSB20200057the STCF Key Technology Research and Development Project.
文摘The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics community.It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or higher.The STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard Model.The STCF project in China is under development with an extensive R&D program.This document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&D and physics case studies.
基金supported by the National Natural Science Foundation of China(Grants 41376078,51639008,and 51239010)the China Geological Survey(Grant DD20160216)the Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant 2017027)
文摘The changes in the mechanical properties of gas hydrate-bearing sediments(GHBS) induced by gas hydrate(GH) dissociation are essential to the evaluation of GH exploration and stratum instabilities. Previous studies present substantial mechanical data and constitutive models for GHBS at a given GH saturation under the non-dissociated condition. In this paper, GHBS was formed by the gas saturated method, GH was dissociated by depressurization until the GH saturation reached different dissociation degrees. The stress–strain curves were measured using triaxial tests at a same pore gas pressure and different confining pressures. The results show that the shear strength decreases progressively by 30%–90% of the initial value with GH dissociation, and the modulus decreases by 50% –75%. Simplified relationships for the modulus, cohesion, and internal friction angle with GH dissociated saturation were presented.
