In a strong crosswind,the wake of a bridge tower will lead to an abrupt change of the aerodynamic forces acting on a vehicle passing through it,which may result in problems related to the transportation safety.This st...In a strong crosswind,the wake of a bridge tower will lead to an abrupt change of the aerodynamic forces acting on a vehicle passing through it,which may result in problems related to the transportation safety.This study investigates the transient aerodynamic characteristics of a high-speed train moving in a truss girder bridge and passing by a bridge tower in a wind tunnel.The scaled ratio of the train,bridge,and tower are 1:30.Effects of various parameters such as the incoming wind speed,train speed,and yaw angle on the aerodynamic performance of the train were considered.Then the sudden change mechanism of aerodynamic loads on the train when it crosses over the tower was further discussed.The results show that the bridge tower has an apparent shielding effect on the train passing through it,with the influencing width being larger than the width of the tower.The train speed is the main factor affecting the influencing width of aerodynamic coefficients,and the mutation amplitude is mainly related to the yaw angle obtained by changing the incoming wind speed or train speed.The vehicle movement introduces an asymmetry of loading on the train in the process of approaching and leaving the wake of the bridge tower,which should not be neglected.展开更多
The results of comprehensive microscopic optical model calculations are pres-ented for the K<sup>+</sup> scattering from <sup>6</sup>Li,<sup>12</sup>C,<sup>28</sup>Si an...The results of comprehensive microscopic optical model calculations are pres-ented for the K<sup>+</sup> scattering from <sup>6</sup>Li,<sup>12</sup>C,<sup>28</sup>Si and <sup>40</sup>Ca at incident momenta 400-800MeV/c.The unconventional medium effect （i.e.the density-dependent correction forthe K<sup>+</sup>-nucleon scattering amplitude） is considered in two approaches.Both results arein agreement with recent experimental data.The influence of the correction on K<sup>+</sup> scat-tering from different nuclei are discussed in detail and only a weak dependence of thein-medium nucleon“swelling”effects on the mass number of target nuclei is found ex-cept for very light loosely-bound nucleus.展开更多
Background Each GECAM satellite payload contains 25 gamma-ray detectors(GRDs),which can detect gamma-rays and particles and can roughly localize the Gamma-Ray Bursts(GRBs).GRD was designed using lanthanum bromide(LaBr...Background Each GECAM satellite payload contains 25 gamma-ray detectors(GRDs),which can detect gamma-rays and particles and can roughly localize the Gamma-Ray Bursts(GRBs).GRD was designed using lanthanum bromide(LaBr3)crystal as the sensitive material with the rear end coupled with silicon photomultiplier(SiPM)array for readout.Purpose In aerospace engineering design of GRD,there are many key points to be studied.In this paper,we present the specific design scheme of GRD,the assembly and the performance test results of detectors.Methods Based on Monte Carlo simulation and experimental test results,the specific schematic design and assembling process of GRD were optimized.After being fully assembled,the GRDs were conducted performance tests by using radioactive source and also conducted random vibration tests.Result and conclusion The test results show that all satellite-borne GRDs have energy resolution<16%at 59.5 keV,meeting requirements of satellite in scientific performance.The random vibration test shows that GRD can maintain in a stable performance,which meets the requirement of spatial application.展开更多
Background The Gravitational wave highly energetic Electromagnetic Counterpart All-sky Monitor(GECAM)is dedicated to detecting gravitational wave gamma-ray bursts.It is capable of all-sky monitoring over and discoveri...Background The Gravitational wave highly energetic Electromagnetic Counterpart All-sky Monitor(GECAM)is dedicated to detecting gravitational wave gamma-ray bursts.It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena.GECAM consists of two microsatellites,each equipped with 8 charged particle detectors(CPDs)and 25 gamma-ray detectors(GRDs).Purpose The CPD is used to measure charged particles in the space environment,monitor energy and flow intensity changes,and identify between gamma-ray bursts and space charged particle events in conjunction with GRD.Methods CPD uses plastic scintillator as the sensitive material for detection,silicon photomultiplier array as the optically readable device,and the inlaid Am-241 radioactive source as the onboard calibration means.Conclusion In this paper,we will present the working principle,physical design,functional implementation and preliminary performance test results of the CPD.As a result,the energy range of electron,gamma-ray detection efficiency and dead time are tested to be better than the indexes required through the ground calibration experiment.展开更多
Introduction The main physical objective of the GECAM satellite is to detect gamma-ray bursts,which is related to gravitational waves of double compact object mergers.The GECAM satellite also detects and investigates ...Introduction The main physical objective of the GECAM satellite is to detect gamma-ray bursts,which is related to gravitational waves of double compact object mergers.The GECAM satellite also detects and investigates various bursts of high-energy celestial bodies.Purposes and methods In this study,we designed,developed and calibrated the payload and launched it into orbit with GECAM satellite.The payload consists of the gamma ray detector(GRD,for detecting 4 keV–4 MeV X/γray),the charged particle detector(CPD,for detecting 150 keV–5 MeV charged particle),and the electronic box(EBOX).The all-sky field coverage is achieved via two 229-degree large-area satellites positioned 180 degrees apart and are on opposite sides of the geo-center.Each satellite is equipped with 25 GRDs and 8 CPDs;thus,the satellite can identify charged particle bursts in space.Gamma-ray detectors adopt lanthanum bromide crystal technology combined with silicon photomultipliers.This is the first time that this technology was used massively in space detectors.Conclusions The GECAM satellite can quickly determine the direction of gamma-ray bursts(positioning)via indexing and fitting method,while the transmit variability,energy spectrum and direction of the gamma-ray bursts guide subsequent observations through the Beidou-3 RDSS in quasi-real time.It will play an important role in the study of high energy celestial bursts.展开更多
Background The Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor(GECAM)satellite developed a SiPM-based gamma-ray detector to monitor the gravitational wave-related GRBs and guide subsequent o...Background The Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor(GECAM)satellite developed a SiPM-based gamma-ray detector to monitor the gravitational wave-related GRBs and guide subsequent observations in other wavelengths of EM.Purpose As all the available SiPM devices belong to commercial grade,quality assurance tests need to be performed in accordance with the aerospace specifcations.Methods In the SiPM application of GECAM,quality assurance experiments were conducted.The mechanism of the failure of SiPM devices was analyzed during the development process.Result Based on the quality assurance test results,the fnal pass rate of SiPM array was 95%.Based on the failure analysis,it was found that a piece of SiPM had a leakage channel after longtime operation due to device defects.Conclusion According to the accumulated experience,in the reliability test of SiPM,it is necessary to pay special attention to test the impedance of each pin of SiPM to ground and confrm that the power switch state of SiPM is controllable.展开更多
Purpose The discovery of gravitational waves and gamma-ray bursts heralds the era of multi-messenger astronomy.With the adoption of two small satellites to achieve the all-sky monitoring of gamma-ray bursts,the gravit...Purpose The discovery of gravitational waves and gamma-ray bursts heralds the era of multi-messenger astronomy.With the adoption of two small satellites to achieve the all-sky monitoring of gamma-ray bursts,the gravitational wave highenergy electromagnetic counterpart all-sky monitor(GECAM)possesses a quasi-real-time early warning ability and plays an important role in positioning the sources of gravitational waves and in subsequent observations.Each satellite of GECAM was fitted with 253-inch-diameter gamma-ray detectors(GRD),covering an energy range of 8–2 MeV.GRDs have adopted silicon photomultiplier tubes(SiPM)in lieu of photomultiplier tubes(PMT)to adapt to the dimensional limitations of micro-satellites.Methods A unique 3-inch circular SiPM array was designed.In this design,646×6 mm chips were arranged evenly in a circular manner with the seams filled with reflecting films,thus achieving satisfactory uniformity of light collection.The integrated pre-amplifier circuit on the back of the SiPM array adopted two-level grouping and summing;further,it achieved a satisfactory signal-to-noise ratio.Two high-gain and low-gain channels were adopted to achieve a large dynamic range,and two independent power supply units were used,where each unit can be closed separately,thus improving reliability.Results Performance studies show that this SiPM array meets the requirements of GECAM.Conclusion A 3-inch SiPM array have been developed that uses grouped summation,reflective films,a circular arrangement,two groups of independent power supplies,high-and low-gain signals,differential signal output technologies,etc.This solution can be used not only for GECAM,but also as a general solution for SiPM-based scintillation detectors.展开更多
The spatial arrangement,distribution and morphology of Fe-bearing intermetallics in AA6082 alloys depends on the manufacturing process of the alloy and thus influences the macroscopic properties.Here,the microstructur...The spatial arrangement,distribution and morphology of Fe-bearing intermetallics in AA6082 alloys depends on the manufacturing process of the alloy and thus influences the macroscopic properties.Here,the microstructure of a near industrial scale casting AA6082 Al alloy fabricated by:(a)direct chill casting,(b)Al-5 Ti-1 B grain refiner addition and(c)intensive melt shearing has been investigated by threedimensional visualization using SEM-based serial ultra microtomy tomography.The formation sequence of phases in AA6082 alloys is generally categorized into four stages:formation ofα-Al grains,Fe-bearing intermetallics,Mg_(2)Si phase,and eutectic rosettes.Results of three-dimensional visualization of the microstructure indicated that TiBparticles not only could nucleate Fe-bearingβ-intermetallics,but also could provide substrate for the formation of Fe-bearingα-intermetallics and Mg_(2)Si.A further deep analysis reveals that the essential condition for the formation of secondary phases such as Fe-bearing intermetallics and Mg_(2)Si phase is the build-up of a supersaturated solute front at theα-Al solid-liquid interface irrespective of the specific nucleation site.In addition,the results indicate that grain refinement processing causes the severe interconnectivity of Fe-bearingα-intermetallics.However,the intensive melt shearing is a better manufacturing process because the intermetallics are more evenly distributed and refined than with the addition of the grain refiner,thereby improving the properties of the alloy.展开更多
The aerodynamic loads of wind turbine blades are substantially affected by dynamic stall induced by the variations of the angle of attack of local airfoil sections.The purpose of the present study is to explore the ef...The aerodynamic loads of wind turbine blades are substantially affected by dynamic stall induced by the variations of the angle of attack of local airfoil sections.The purpose of the present study is to explore the effect of leading-edge protuberances on the fluctuation of the aerodynamic performances for wind turbine airfoil during dynamic stall.An experimental investigation is carried out by a direct force measurement technique employing force balance at a Reynolds number Re=2×105.The phase-averaged and instantaneous aerodynamic loads of the pitching airfoil,including the baseline and the wavy airfoil,are presented and analyzed.The phase-averaged results indicate that the effects of dynamic stall for the wavy airfoil can be delayed or minimized compared to the baseline airfoil,and the negative damping area of the wavy airfoil is significant decreased in full-stall condition.These effects of leading-edge protuberances are more notable at a higher reduced frequency.For the instantaneous aerodynamic loads of the wavy airfoil,there is an observable reduction in fluctuations compared with baseline case.Furthermore,spectral analysis is applied to quantitatively undercover the nonstationary features of the instantaneous aerodynamic loads.It is found that the leading edge protuberances can reduce the harmonics of the aerodynamic force signal,and enhance the stability of the aerodynamic loads under different reduced frequencies.In conclusion,leading-edge protuberances are found effective to reduce the fluctuation characteristics of the aerodynamic loads during the dynamic stall process,and help to improve the stability and prolong the service life of the wind turbine blades.展开更多
Background The Gravitational Wave High-energy Electromagnetic Counterpart All-sky Monitor(GECAM)consists of 2 microsatellites,each of which contains 25 GRD(LaBr3)detectors and 8 CPD(plastic scintillator)detectors.Meth...Background The Gravitational Wave High-energy Electromagnetic Counterpart All-sky Monitor(GECAM)consists of 2 microsatellites,each of which contains 25 GRD(LaBr3)detectors and 8 CPD(plastic scintillator)detectors.Method silicon photomultiplier(SiPM)array is used to read each detector.The output signal of these detectors with SiPM array is very special and challenging to readout.In this study,a novel data acquisition(DAQ)algorithm for these detectors is designed and implemented,and the content of the output event packet is defined.Result and Conclusion The performances,including the event acquisition efficiency of this DAQ algorithm,are extensively verified through experimental tests.From the on-ground and in-flight tests,this algorithm has excellent performance despite the very limited resources and short development time of GECAM mission.展开更多
Nanocrystalline(NC)W metals and alloys often exhibit higher radiation tolerance and strength than their coarse-grained counterparts.However,their thermal stability is low,making it difficult to achieve bulk NC W metal...Nanocrystalline(NC)W metals and alloys often exhibit higher radiation tolerance and strength than their coarse-grained counterparts.However,their thermal stability is low,making it difficult to achieve bulk NC W metals and alloys by consolidation using conventional techniques such as pressure-less sintering,hot-explosive-compaction sintering,and spark plasma sintering.Here we report the synthesis and mechanical properties of bulk NC W_(100-x)Ti_(x)(x=10 at.%-30 at.%)alloys prepared by consolidating mechanically alloyed NC powders under a high-temperature/high-pressure condition.Adding 20 at.%-30 at.%Ti largely improves the sinterability of NC W-Ti alloy powders.The room-temperature microhardness and compressive yield strength of consolidated bulk NC W_(80)Ti_(20) alloy are∼16.9 and 6.0 GPa,respectively,which are mainly caused by grain boundary strengthening and significantly higher than those of previously reported W and W alloys.The ultimate compressive strength of bulk NC W_(80)Ti_(20) measured between 900 and 1100°C deceases with increasing temperature.This behavior can be explained by the activation of Rachinger grain boundary sliding.No grain growth is observed in bulk NC W_(80)Ti_(20) after compression at 1000°C.Theoretical calculation suggests that it is the segregation of Ti at grain boundaries that decreases the specific grain boundary free energy and makes the NC W_(80)Ti_(20) alloy thermodynamically stable.展开更多
基金The authors would like to gratefully acknowledge the supports from the National Natural Science Foundation of China(No.U1434205,51708645)Zhejiang Provincial Natural Science Foundation of China(No.LY19E080016).
文摘In a strong crosswind,the wake of a bridge tower will lead to an abrupt change of the aerodynamic forces acting on a vehicle passing through it,which may result in problems related to the transportation safety.This study investigates the transient aerodynamic characteristics of a high-speed train moving in a truss girder bridge and passing by a bridge tower in a wind tunnel.The scaled ratio of the train,bridge,and tower are 1:30.Effects of various parameters such as the incoming wind speed,train speed,and yaw angle on the aerodynamic performance of the train were considered.Then the sudden change mechanism of aerodynamic loads on the train when it crosses over the tower was further discussed.The results show that the bridge tower has an apparent shielding effect on the train passing through it,with the influencing width being larger than the width of the tower.The train speed is the main factor affecting the influencing width of aerodynamic coefficients,and the mutation amplitude is mainly related to the yaw angle obtained by changing the incoming wind speed or train speed.The vehicle movement introduces an asymmetry of loading on the train in the process of approaching and leaving the wake of the bridge tower,which should not be neglected.
基金The project supportcd in part by the National Natural Science Foundation of China
文摘The results of comprehensive microscopic optical model calculations are pres-ented for the K<sup>+</sup> scattering from <sup>6</sup>Li,<sup>12</sup>C,<sup>28</sup>Si and <sup>40</sup>Ca at incident momenta 400-800MeV/c.The unconventional medium effect （i.e.the density-dependent correction forthe K<sup>+</sup>-nucleon scattering amplitude） is considered in two approaches.Both results arein agreement with recent experimental data.The influence of the correction on K<sup>+</sup> scat-tering from different nuclei are discussed in detail and only a weak dependence of thein-medium nucleon“swelling”effects on the mass number of target nuclei is found ex-cept for very light loosely-bound nucleus.
基金This research was supported by the National Natural Science Foundation of China,Grant No.11775251the strategic leading science and technology program of Chinese Academy of Sciences(Grant No.XDA 15360100,XDA 15360102).
文摘Background Each GECAM satellite payload contains 25 gamma-ray detectors(GRDs),which can detect gamma-rays and particles and can roughly localize the Gamma-Ray Bursts(GRBs).GRD was designed using lanthanum bromide(LaBr3)crystal as the sensitive material with the rear end coupled with silicon photomultiplier(SiPM)array for readout.Purpose In aerospace engineering design of GRD,there are many key points to be studied.In this paper,we present the specific design scheme of GRD,the assembly and the performance test results of detectors.Methods Based on Monte Carlo simulation and experimental test results,the specific schematic design and assembling process of GRD were optimized.After being fully assembled,the GRDs were conducted performance tests by using radioactive source and also conducted random vibration tests.Result and conclusion The test results show that all satellite-borne GRDs have energy resolution<16%at 59.5 keV,meeting requirements of satellite in scientific performance.The random vibration test shows that GRD can maintain in a stable performance,which meets the requirement of spatial application.
基金This research was supported by the“Strategic Priority Research Program”of the Chinese Academy of Sciences,Grant No.XDA 15360102.
文摘Background The Gravitational wave highly energetic Electromagnetic Counterpart All-sky Monitor(GECAM)is dedicated to detecting gravitational wave gamma-ray bursts.It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena.GECAM consists of two microsatellites,each equipped with 8 charged particle detectors(CPDs)and 25 gamma-ray detectors(GRDs).Purpose The CPD is used to measure charged particles in the space environment,monitor energy and flow intensity changes,and identify between gamma-ray bursts and space charged particle events in conjunction with GRD.Methods CPD uses plastic scintillator as the sensitive material for detection,silicon photomultiplier array as the optically readable device,and the inlaid Am-241 radioactive source as the onboard calibration means.Conclusion In this paper,we will present the working principle,physical design,functional implementation and preliminary performance test results of the CPD.As a result,the energy range of electron,gamma-ray detection efficiency and dead time are tested to be better than the indexes required through the ground calibration experiment.
基金This project is supported by National Natural Science Foundation of China(12173038)the strategic leading science and technology program(XDA 15360100,XDA 15360102)of the Chinese Academy of Sciences.
文摘Introduction The main physical objective of the GECAM satellite is to detect gamma-ray bursts,which is related to gravitational waves of double compact object mergers.The GECAM satellite also detects and investigates various bursts of high-energy celestial bodies.Purposes and methods In this study,we designed,developed and calibrated the payload and launched it into orbit with GECAM satellite.The payload consists of the gamma ray detector(GRD,for detecting 4 keV–4 MeV X/γray),the charged particle detector(CPD,for detecting 150 keV–5 MeV charged particle),and the electronic box(EBOX).The all-sky field coverage is achieved via two 229-degree large-area satellites positioned 180 degrees apart and are on opposite sides of the geo-center.Each satellite is equipped with 25 GRDs and 8 CPDs;thus,the satellite can identify charged particle bursts in space.Gamma-ray detectors adopt lanthanum bromide crystal technology combined with silicon photomultipliers.This is the first time that this technology was used massively in space detectors.Conclusions The GECAM satellite can quickly determine the direction of gamma-ray bursts(positioning)via indexing and fitting method,while the transmit variability,energy spectrum and direction of the gamma-ray bursts guide subsequent observations through the Beidou-3 RDSS in quasi-real time.It will play an important role in the study of high energy celestial bursts.
基金This research is supported by the Strategic Priority Research Program of Chinese Academy of Sciences,Grant No.XDA15360102.
文摘Background The Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor(GECAM)satellite developed a SiPM-based gamma-ray detector to monitor the gravitational wave-related GRBs and guide subsequent observations in other wavelengths of EM.Purpose As all the available SiPM devices belong to commercial grade,quality assurance tests need to be performed in accordance with the aerospace specifcations.Methods In the SiPM application of GECAM,quality assurance experiments were conducted.The mechanism of the failure of SiPM devices was analyzed during the development process.Result Based on the quality assurance test results,the fnal pass rate of SiPM array was 95%.Based on the failure analysis,it was found that a piece of SiPM had a leakage channel after longtime operation due to device defects.Conclusion According to the accumulated experience,in the reliability test of SiPM,it is necessary to pay special attention to test the impedance of each pin of SiPM to ground and confrm that the power switch state of SiPM is controllable.
基金This research was supported by the Key Research Program of Frontier Sciences,Chinese Academy of Sciences(QYZDBSSW-SLH012)the National Natural Science Foundation of China(11775251,11775252)the strategic leading science and technology program of Chinese Academy of Sciences(XDA 15360100,XDA 15360102).
文摘Purpose The discovery of gravitational waves and gamma-ray bursts heralds the era of multi-messenger astronomy.With the adoption of two small satellites to achieve the all-sky monitoring of gamma-ray bursts,the gravitational wave highenergy electromagnetic counterpart all-sky monitor(GECAM)possesses a quasi-real-time early warning ability and plays an important role in positioning the sources of gravitational waves and in subsequent observations.Each satellite of GECAM was fitted with 253-inch-diameter gamma-ray detectors(GRD),covering an energy range of 8–2 MeV.GRDs have adopted silicon photomultiplier tubes(SiPM)in lieu of photomultiplier tubes(PMT)to adapt to the dimensional limitations of micro-satellites.Methods A unique 3-inch circular SiPM array was designed.In this design,646×6 mm chips were arranged evenly in a circular manner with the seams filled with reflecting films,thus achieving satisfactory uniformity of light collection.The integrated pre-amplifier circuit on the back of the SiPM array adopted two-level grouping and summing;further,it achieved a satisfactory signal-to-noise ratio.Two high-gain and low-gain channels were adopted to achieve a large dynamic range,and two independent power supply units were used,where each unit can be closed separately,thus improving reliability.Results Performance studies show that this SiPM array meets the requirements of GECAM.Conclusion A 3-inch SiPM array have been developed that uses grouped summation,reflective films,a circular arrangement,two groups of independent power supplies,high-and low-gain signals,differential signal output technologies,etc.This solution can be used not only for GECAM,but also as a general solution for SiPM-based scintillation detectors.
基金financially supported by the EPSRC(No.EP/N007638/1)the 2021 Jiangsu Shuangchuang(Mass Innovation and Entrepreneurship)Talent Program(No.JSSCBS20210702)。
文摘The spatial arrangement,distribution and morphology of Fe-bearing intermetallics in AA6082 alloys depends on the manufacturing process of the alloy and thus influences the macroscopic properties.Here,the microstructure of a near industrial scale casting AA6082 Al alloy fabricated by:(a)direct chill casting,(b)Al-5 Ti-1 B grain refiner addition and(c)intensive melt shearing has been investigated by threedimensional visualization using SEM-based serial ultra microtomy tomography.The formation sequence of phases in AA6082 alloys is generally categorized into four stages:formation ofα-Al grains,Fe-bearing intermetallics,Mg_(2)Si phase,and eutectic rosettes.Results of three-dimensional visualization of the microstructure indicated that TiBparticles not only could nucleate Fe-bearingβ-intermetallics,but also could provide substrate for the formation of Fe-bearingα-intermetallics and Mg_(2)Si.A further deep analysis reveals that the essential condition for the formation of secondary phases such as Fe-bearing intermetallics and Mg_(2)Si phase is the build-up of a supersaturated solute front at theα-Al solid-liquid interface irrespective of the specific nucleation site.In addition,the results indicate that grain refinement processing causes the severe interconnectivity of Fe-bearingα-intermetallics.However,the intensive melt shearing is a better manufacturing process because the intermetallics are more evenly distributed and refined than with the addition of the grain refiner,thereby improving the properties of the alloy.
基金the National Natural Science Foundation of China(Grant 51736008)"Transformational Technologies for Clean Energy and Demonstration",Strategic Priority Research Program of the Chinese Academy of Sciences(Grant XDA21050303).
文摘The aerodynamic loads of wind turbine blades are substantially affected by dynamic stall induced by the variations of the angle of attack of local airfoil sections.The purpose of the present study is to explore the effect of leading-edge protuberances on the fluctuation of the aerodynamic performances for wind turbine airfoil during dynamic stall.An experimental investigation is carried out by a direct force measurement technique employing force balance at a Reynolds number Re=2×105.The phase-averaged and instantaneous aerodynamic loads of the pitching airfoil,including the baseline and the wavy airfoil,are presented and analyzed.The phase-averaged results indicate that the effects of dynamic stall for the wavy airfoil can be delayed or minimized compared to the baseline airfoil,and the negative damping area of the wavy airfoil is significant decreased in full-stall condition.These effects of leading-edge protuberances are more notable at a higher reduced frequency.For the instantaneous aerodynamic loads of the wavy airfoil,there is an observable reduction in fluctuations compared with baseline case.Furthermore,spectral analysis is applied to quantitatively undercover the nonstationary features of the instantaneous aerodynamic loads.It is found that the leading edge protuberances can reduce the harmonics of the aerodynamic force signal,and enhance the stability of the aerodynamic loads under different reduced frequencies.In conclusion,leading-edge protuberances are found effective to reduce the fluctuation characteristics of the aerodynamic loads during the dynamic stall process,and help to improve the stability and prolong the service life of the wind turbine blades.
基金The authors would like to thank all colleagues for helpful suggestions and comments.This study was supported by the National Natural Science Foundation of China(Grant No.11803039 and 12173038)the Strategic Priority Research Program on Space Science,the Chinese Academy of Sciences(Grant No.XDA 15360100 and XDA 15360102).
文摘Background The Gravitational Wave High-energy Electromagnetic Counterpart All-sky Monitor(GECAM)consists of 2 microsatellites,each of which contains 25 GRD(LaBr3)detectors and 8 CPD(plastic scintillator)detectors.Method silicon photomultiplier(SiPM)array is used to read each detector.The output signal of these detectors with SiPM array is very special and challenging to readout.In this study,a novel data acquisition(DAQ)algorithm for these detectors is designed and implemented,and the content of the output event packet is defined.Result and Conclusion The performances,including the event acquisition efficiency of this DAQ algorithm,are extensively verified through experimental tests.From the on-ground and in-flight tests,this algorithm has excellent performance despite the very limited resources and short development time of GECAM mission.
基金financially supported by the National Natural Science Foundation of China (Nos. 11935004 and 51971195)the Youth Fund Project of Science and Technology Research of Hebei Province (No. QN2020210)+3 种基金the Self Financing Project of Key Research and Development Program of Hebei Province (No. 1621116)the Natural Science Foundation of Hebei Province (Grant No. E2019203465)the Independent Research Program of Young Teachers of Yanshan University (No. 14LGB007)the High-Level Talents Research Program of Yanshan Universit y (No. 606001101)
文摘Nanocrystalline(NC)W metals and alloys often exhibit higher radiation tolerance and strength than their coarse-grained counterparts.However,their thermal stability is low,making it difficult to achieve bulk NC W metals and alloys by consolidation using conventional techniques such as pressure-less sintering,hot-explosive-compaction sintering,and spark plasma sintering.Here we report the synthesis and mechanical properties of bulk NC W_(100-x)Ti_(x)(x=10 at.%-30 at.%)alloys prepared by consolidating mechanically alloyed NC powders under a high-temperature/high-pressure condition.Adding 20 at.%-30 at.%Ti largely improves the sinterability of NC W-Ti alloy powders.The room-temperature microhardness and compressive yield strength of consolidated bulk NC W_(80)Ti_(20) alloy are∼16.9 and 6.0 GPa,respectively,which are mainly caused by grain boundary strengthening and significantly higher than those of previously reported W and W alloys.The ultimate compressive strength of bulk NC W_(80)Ti_(20) measured between 900 and 1100°C deceases with increasing temperature.This behavior can be explained by the activation of Rachinger grain boundary sliding.No grain growth is observed in bulk NC W_(80)Ti_(20) after compression at 1000°C.Theoretical calculation suggests that it is the segregation of Ti at grain boundaries that decreases the specific grain boundary free energy and makes the NC W_(80)Ti_(20) alloy thermodynamically stable.
