Use of multidisciplinary analysis in reliabilitybased design optimization(RBDO) results in the emergence of the important method of reliability-based multidisciplinary design optimization(RBMDO). To enhance the effici...Use of multidisciplinary analysis in reliabilitybased design optimization(RBDO) results in the emergence of the important method of reliability-based multidisciplinary design optimization(RBMDO). To enhance the efficiency and convergence of the overall solution process,a decoupling algorithm for RBMDO is proposed herein.Firstly, to decouple the multidisciplinary analysis using the individual disciplinary feasible(IDF) approach, the RBMDO is converted into a conventional form of RBDO. Secondly,the incremental shifting vector(ISV) strategy is adopted to decouple the nested optimization of RBDO into a sequential iteration process composed of design optimization and reliability analysis, thereby improving the efficiency significantly. Finally, the proposed RBMDO method is applied to the design of two actual electronic products: an aerial camera and a car pad. For these two applications, two RBMDO models are created, each containing several finite element models(FEMs) and relatively strong coupling between the involved disciplines. The computational results demonstrate the effectiveness of the proposed method.展开更多
In this paper,an uncertainty propagation analysis method is developed based on an extended sparse grid technique and maximum entropy principle,aiming at improving the solving accuracy of the high-order moments and hen...In this paper,an uncertainty propagation analysis method is developed based on an extended sparse grid technique and maximum entropy principle,aiming at improving the solving accuracy of the high-order moments and hence the fitting accuracy of the probability density function(PDF)of the system response.The proposed method incorporates the extended Gauss integration into the uncertainty propagation analysis.Moreover,assisted by the Rosenblatt transformation,the various types of extended integration points are transformed into the extended Gauss-Hermite integration points,which makes the method suitable for any type of continuous distribution.Subsequently,within the sparse grid numerical integration framework,the statistical moments of the system response are obtained based on the transformed points.Furthermore,based on the maximum entropy principle,the obtained first four-order statistical moments are used to fit the PDF of the system response.Finally,three numerical examples are investigated to demonstrate the effectiveness of the proposed method,which includes two mathematical problems with explicit expressions and an engineering application with a black-box model.展开更多
The increasing demand for wastewater treatment has become a notable trend for addressing global water scarcity.However,fouling is a significant challenge for wastewater distribution engineering systems.This study prov...The increasing demand for wastewater treatment has become a notable trend for addressing global water scarcity.However,fouling is a significant challenge for wastewater distribution engineering systems.This study provides an approach using nanobubbles(NBs)to control fouling.The antifouling capacities of three types of NBs,six oxygen concentrations,and two application procedures(prevention and removal)are investigated.The results show that NBs effectively mitigate composite fouling—including biofouling,inorganic scaling,and particulate fouling—in comparison with the non-NBs group.More specifically,hydroxyl radicals generated by the self-collapse of NBs oxidize organics and kill microorganisms in wastewater.The negatively charged surfaces of the NBs transform the crystalline form of CaCO_(3)from calcite to looser aragonite,which reduces the likelihood of ion precipitation.Furthermore,the NBs gas-liquid interfaces act as gas"bridges"between colloidal particles,enhancing the removal of particles from wastewater.Lastly,although the NBs inhibit the growth of fouling,they do not significantly remove the already adhered fouling in non-NBs treated groups.This study anticipates that the application of NBs will address the significant fouling issue for various wastewater distribution engineering systems in order to meet the global challenge of sustainable water supplies.展开更多
Different artificial two-stage ageing behaviors and their effect on stress corrosion cracking （SCC） susceptibility of AI-Zn-Mg alloy have been investigated. The experimental results show that two hardness peaks pres...Different artificial two-stage ageing behaviors and their effect on stress corrosion cracking （SCC） susceptibility of AI-Zn-Mg alloy have been investigated. The experimental results show that two hardness peaks present on the second-stage ageing-hardening curve when the first-stage ageing is dealt with comparatively lower temperature than the conventional one. The first peak is caused by dispersive and evenly distributed G.P. zones, while η ′phases and coarsened G.P. zones contribute to the second peak. Tensile strength of experimental alloy raises 9.6% （33.2 MPa） and SCC susceptibility decreases 38.9% by applying the second peak ageing regime instead of conventional T73. AI-Zn-Mg alloy obtains high strength and SCC resistance due to its finely dispersive matrix precipitates （MPts）, coarsened and discontinuous grain boundary precipitates （GBPs）, as well as the narrow precipitate free zone （PFZ） in the second peak ageing condition. 2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science ＆ Technology.展开更多
NiTi/Stainless Steel(SS) sheets have been welded via a vacuum electron beam welding process, with three methods(offsetting electron beam to SS side without interlayer, adding Ni interlayer and adding Fe Ni interlayer)...NiTi/Stainless Steel(SS) sheets have been welded via a vacuum electron beam welding process, with three methods(offsetting electron beam to SS side without interlayer, adding Ni interlayer and adding Fe Ni interlayer), to promote mechanical properties of the Ni Ti/SS joints. The joints with different interlayers are all fractured in the weld zone near the Ni Ti side, which is attributed to the enrichment of intermetallic compounds including Fe2 Ti and Ni3 Ti. The fracture mechanisms of different joints are strongly dependent on the types of interlayers, and the joints without interlayer, adding Ni interlayer and adding Fe Ni interlayer exhibit cleavage fracture, intergranular fracture and mixed fracture composed of cleavage and tearing ridge, respectively. Compared with the brittle laves phase Fe2 Ti, Ni3 Ti phase can exhibit certain plasticity, block the crack propagation and change the direction of crack propagation. The composite structure of Ni3 Ti and Fe2 Ti will be formed when the Fe Ni alloy is taken as the interlayer, which provides the joint excellent mechanical properties, with rupture strength of 343 MPa.展开更多
Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays...Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η).The fit fractions of individual components are obtained,and large interferences among the dominant components of the decays D^(0)→a_(1)(1260)π,D^(0)→π(1300)π,D^(0)→ρ(770)ρ(770),and D^(0)→2(ππ)_(S)are observed in both channels.With the obtained amplitude model,the CP-even fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are determined to be(75.2±1.1_(stat).±1.5_(syst.))%and(68.9±1.5_(stat).±2.4_(syst.))%,respectively.The branching fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are measured to be(0.688±0.010_(stat.)±0.010_(syst.))%and(0.951±0.025_(stat.)±0.021_(syst.))%,respectively.The amplitude analysis provides an important model for the binning strategy in measuring the strong phase parameters of D^(0)→4πwhen used to determine the CKM angleγ(ϕ_(3))via the B^(−)→DK^(−)decay.展开更多
The number ofψ(3686)events collected by the BESⅢdetector during the 2021 run period is determined to be(2259.3±11.1)×10~6 by counting inclusiveψ(3686)hadronic events.The uncertainty is systematic and the ...The number ofψ(3686)events collected by the BESⅢdetector during the 2021 run period is determined to be(2259.3±11.1)×10~6 by counting inclusiveψ(3686)hadronic events.The uncertainty is systematic and the statistical uncertainty is negligible.Meanwhile,the numbers ofψ(3686)events collected during the 2009 and 2012run periods are updated to be(107.7±0.6)×10~6 and(345.4±2.6)×10~6,respectively.Both numbers are consistent with the previous measurements within one standard deviation.The total number ofψ(3686)events in the three data samples is(2712.4±14.3)×10~6.展开更多
We present a measurement of the integrated luminosity of e^(+)e^(-)collision data collected by the BESIII detector at the BEPCII collider at a center-of-mass energy of Ecm=3.773 GeV.The integrated luminosities of the ...We present a measurement of the integrated luminosity of e^(+)e^(-)collision data collected by the BESIII detector at the BEPCII collider at a center-of-mass energy of Ecm=3.773 GeV.The integrated luminosities of the datasets taken from December 2021 to June 2022,from November 2022 to June 2023,and from October 2023 to February 2024 were determined to be 4.995±0.019 fb^(-1),8.157±0.031 fb^(-1),and 4.191±0.016 fb^(-1),respectively,by analyzing large angle Bhabha scattering events.The uncertainties are dominated by systematic effects,and the statistical uncertainties are negligible.Our results provide essential input for future analyses and precision measurements.展开更多
The target backsheath field acceleration mechanism is one of the main mechanisms of laser-driven proton acceleration(LDPA)and strongly depends on the comprehensive performance of the ultrashort ultra-intense lasers us...The target backsheath field acceleration mechanism is one of the main mechanisms of laser-driven proton acceleration(LDPA)and strongly depends on the comprehensive performance of the ultrashort ultra-intense lasers used as the driving sources.The successful use of the SG-II Peta-watt(SG-II PW)laser facility for LDPA and its applications in radiographic diagnoses have been manifested by the good performance of the SG-II PW facility.Recently,the SG-II PW laser facility has undergone extensive maintenance and a comprehensive technical upgrade in terms of the seed source,laser contrast and terminal focus.LDPA experiments were performed using the maintained SG-II PW laser beam,and the highest cutoff energy of the proton beam was obviously increased.Accordingly,a double-film target structure was used,and the maximum cutoff energy of the proton beam was up to 70 MeV.These results demonstrate that the comprehensive performance of the SG-II PW laser facility was improved significantly.展开更多
We report a search for a heavier partner of the recently observed Z_(cs)(3985)^(-) state,denoted as Z_(cs)^('-),in the process e^(+)e^(−)→K^(+)D_(s)^(∗−) D^(∗0 )+ c.c.,based on e^(*)e^(-)collision data collected ...We report a search for a heavier partner of the recently observed Z_(cs)(3985)^(-) state,denoted as Z_(cs)^('-),in the process e^(+)e^(−)→K^(+)D_(s)^(∗−) D^(∗0 )+ c.c.,based on e^(*)e^(-)collision data collected at the center-of-mass energies of √s=4.661,4.682 and 4.699 GeV with the BESIII detector.The Z_(cs)^('-) is of interest as it is expected to be a candidate for a hidden-charm and open-strange tetraquark.A partial-reconstruction technique is used to isolate K^(+)recoil-mass spectra,which are probed for a potential contribution from Z_(cs)^('-)→D_(s)^(∗−) D^(∗0 )+ c.c.We find an excess of Z_(cs)^('-)→D_(s)^(*-)-D^(*0)(c.c.)candidates with a significance of 2.1o,after considering systematic uncertainties,at a mass of(4123.5±0.7_(sat)±4.7_(syst.))MeV/c^(2).As the data set is limited in size,the upper limits are evaluated at the 90%confidence level on the product of the Born cross sections(σ^(Borm))and the branching fraction(B)of Z_(cs)^('-)→D_(s)^(*-)-D^(*0),under different assumptions of the Z_(cs)^('-) mass from 4.120 to 4.140 MeV and of the width from 10 to 50 MeV at the three center-of-mass energies.The upper limits of σ^(Born).B are found to be at the level of O(1)pb at each energy.Larger data samples are needed to confirm the Z_(cs)^('-) state and clarify its nature in the coming years.展开更多
Enhancing the strength of Al-Zn-Mg alloys is critical to the weight-lightening of structural components in the application of high-speed trains and aerospace industries,while high stress corrosion cracking(SCC)suscept...Enhancing the strength of Al-Zn-Mg alloys is critical to the weight-lightening of structural components in the application of high-speed trains and aerospace industries,while high stress corrosion cracking(SCC)susceptibility of Al-Zn-Mg alloys(especially the alloy with high recrystallization fraction)with high strength makes it difficult.In this study,the influence of tensile stress-aging coupled with natural aging pre-treatment on the mechanical properties and SCC resistance of Al-Zn-Mg alloy with high recrystallization fraction has been investigated.The results show that tensile stress-aging at 160℃can inhibit the dissolution of clusters/Guinier-Preston(GP)zones formed during long-term natural aging pre-treatment,which increases the number density of matrix precipitates(MPts),narrow the width of precipitate free zone(PFZ),and dramatically improve the mechanical properties of the experimental Al-Zn-Mg alloy.Meanwhile,the precipitation of the high density of MPts within the matrix will assume a large number of solute atoms during artificial aging,which will reduce the supplement of solute atoms to grain boundaries.As a result,the volume of anodic active grain boundary precipitates(GBPs)and the content of free solute atoms at grain boundaries are reduced,which reduces the possibility of initial nucleation and propagation of SCC crack.The coupled treatment method proposed in this study proves efficient in resolving the contradiction between the strength and SCC resistance in Al-Zn-Mg alloy.展开更多
We report the properties of more than 600 bursts(including cluster-bursts)detected from the repeating fast radio burst(FRB)source FRB 20201124A with the Five-hundred-meter Aperture Spherical radio Telescope during an ...We report the properties of more than 600 bursts(including cluster-bursts)detected from the repeating fast radio burst(FRB)source FRB 20201124A with the Five-hundred-meter Aperture Spherical radio Telescope during an extremely active episode on UTC 2021 September 25–28,in a series of four papers.The observations were carried out in the band of 1.0–1.5 GHz by using the center beam of the L-band 19-beam receiver.We monitored the source in sixteen1 hr sessions and one 3 hr session spanning 23 days.All the bursts were detected during the first four days.In this first paper of the series,we perform a detailed morphological study of 624 bursts using the two-dimensional frequencytime“waterfall”plots,with a burst(or cluster-burst)defined as an emission episode during which the adjacent emission peaks have a separation shorter than 400 ms.The duration of a burst is therefore always longer than 1 ms,with the longest up to more than 120 ms.The emission spectra of the sub-bursts are typically narrow within the observing band with a characteristic width of~277 MHz.The center frequency distribution has a dominant peak at about 1091.9 MHz and a secondary weak peak around 1327.9 MHz.Most bursts show a frequencydownwarddrifting pattern.Based on the drifting patterns,we classify the bursts into five main categories:downward drifting(263)bursts,upward drifting(3)bursts,complex(203),no drifting(35)bursts,and no evidence for drifting(121)bursts.Subtypes are introduced based on the emission frequency range in the band(low,middle,high and wide)as well as the number of components in one burst(1,2,or multiple).We measured a varying scintillation bandwidth from about 0.5 MHz at 1.0 GHz to 1.4 MHz at 1.5 GHz with a spectral index of 3.0.展开更多
Environment friendly ferroelectric relaxor Ba(Zr_(0.2)Ti_(0.8))O_(3)thin fims with the addition of 2%Mn dopant were grown on(001)MgO substrates by pulsed laser deposition.Microstructure studies with X-ray di®ract...Environment friendly ferroelectric relaxor Ba(Zr_(0.2)Ti_(0.8))O_(3)thin fims with the addition of 2%Mn dopant were grown on(001)MgO substrates by pulsed laser deposition.Microstructure studies with X-ray di®raction and transmission electron microscopy reveal that the as-grown Ba(Zr_(0.2)Ti_(0.8))O_(3) thin films are c-axis oriented with an atomic sharp interface.The films have good single crystallinity and good epitaxial quality.The interface relationship was determined to be[100]Mn.BZT//[100]MgO and(001)Mn.BZT//(001)MgO.Nanoscale order/disorder relaxor structures were found with nano-columnar structures.The microwave dielectric measurements(15-18GHz)indicate that the¯lms have excellent dielectric properties with large dielectric constant value,high tunability,and low dielectric loss,promising the development of room temperature tunable microwave elements.展开更多
In order to improve the performances of electroplating permanent magnetic films, neodymium is introduced into the electroplating CoNiMnP permanent magnetic films. The influences of the neodymium content are also inves...In order to improve the performances of electroplating permanent magnetic films, neodymium is introduced into the electroplating CoNiMnP permanent magnetic films. The influences of the neodymium content are also investigated by varying NdCl3 plating bath concentration. The neodymium-doped films are analyzed by energy dispersive spectrum (EDS), vibrating sample magnetometer (VSM) and magnetic force microscope (MFM). The experimental results show that high magnetic performances of CoNdNiMnP permanent magnetic films with vertical anisotropy could be fabricated with current density 5mA/cm2 at room temperature. With the increasing of neodymium contents, the magnetic properties of films were improved. However when neodymium contents exceeded 3.5wt%, the magnetic properties of films are not improved any more. The increase of film magnetic properties results from the ferromagnetic-coupling between light rare earth element-neodymium and transition metal element-cobalt.展开更多
The influences of plating bath solution PH and current density on coercivity of electroplating CoNdNiMnP permanent magnetic film arrays were studied. The experiment results show that both for solution PH and current d...The influences of plating bath solution PH and current density on coercivity of electroplating CoNdNiMnP permanent magnetic film arrays were studied. The experiment results show that both for solution PH and current density there were the best depositing parameters. Too high and too low plating bath solution PH or current density both result in decreasing of the film array coercivity. When solution PH is 3.5 and current density is 5mA/cm2, the prepared film array coercivity can reach the maximum.展开更多
Results presented in this paper contribute to investigation of the granulation mechanisms of γ+(Fe,Mn)3C eutectics in the austenite matrix composites (abbreviated EAMC). The specimens corresponding to the nominal com...Results presented in this paper contribute to investigation of the granulation mechanisms of γ+(Fe,Mn)3C eutectics in the austenite matrix composites (abbreviated EAMC). The specimens corresponding to the nominal composition of eutectic with controlled RE(Ce)-Mg agent modifier additions have been unidirectional solidified with a constant growth rate of 2.18μm/s at a fixed temperature gradient of 800K/cm using vertical Bridgeman method. With the RE-Mg agent modifier, the transition of solid/liquid (S/L) interface from columnar to dendrite (CDT), refinement and developed branching of γ and (Fe,Mn)3C phases in the eutectics, and the transition of growth style from faceted-nonfaceted (F/NF) to nonfaceted-nonfaceted (NF/NF) for γ and (Fe,Mn)3C phases in the eutectic have been observed and investigated theoretically. Those can explain the granulation of γ+(Fe,Mn)3C eutectics in the as cast because the roundness increases with the developed lateral branching of primary austenite dendrites, refinement of eutectics, and NF/NF growth of γ and (Fe,Mn)3C phases in the eutectic.展开更多
Results presented in this paper contribute to investigation of the effect of the added Ca-Si modifier amount ( ) on the microstructure scales of granular γ-(Fe,Mn)3C eutectics such as the volume fraction (f) and di...Results presented in this paper contribute to investigation of the effect of the added Ca-Si modifier amount ( ) on the microstructure scales of granular γ-(Fe,Mn)3C eutectics such as the volume fraction (f) and diameter (d) in the austenite steel matrix composites (EAMC). Directional solidification of EAMC has been carried out using vertical Bridgman method at 50.6μms-1 with a constant temperature gradient about 800Kcm-1. The higher constitutional supercooling ahead of solid-liquid interface attributing to the larger results in the enlargement of γ-(Fe,Mn)3C coupled-zone and the increment of the nucleation rate of eutectics. Therefore, f increases with increasing . The branches of the primary austenite dendrites develop more greatly as increases, which limits the growth of eutectics. As a result, d decreases with increasing .展开更多
A new near-infrared direct acceleration mechanism driven by Laguerre-Gaussian laser is proposed to stably accelerate and concentrate electron slice both in longitudinal and transversal directions in vacuum.Three-dimen...A new near-infrared direct acceleration mechanism driven by Laguerre-Gaussian laser is proposed to stably accelerate and concentrate electron slice both in longitudinal and transversal directions in vacuum.Three-dimensional simulations show that a 2-μm circularly polarized LG_(p)^(l)(p=0,l=1,σ_(2)=-1)laser can directly manipulate attosecond electron slices in additional dimensions(angular directions)and give them annular structures and angular momentums.These annular vortex attosecond electron slices are expected to have some novel applications such as in the collimation of antiprotons in conventional linear accelerators,edge-enhancement electron imaging,structured X-ray generation,and analysis and manipulation of nanomaterials.展开更多
Strong metal/non-polar plastic dissimilar joints are highly demanded for the lightweight design in many fields,which,however,are rather challenging to achieve directly via welding.In this study,we designed a laser pro...Strong metal/non-polar plastic dissimilar joints are highly demanded for the lightweight design in many fields,which,however,are rather challenging to achieve directly via welding.In this study,we designed a laser processing pretreatment on the Al alloy to create a deep porous Al surface structure,which was successfully joined to the polypropylene(PP) via friction spot welding.A maximum joint strength of29 MPa was achieved,the same as that of the base PP(i.e.the joint efficiency reached 100%),much larger than ever reported.The joining mechanism of the Al alloy and the PP was mainly attributed to the large mechanical interlocking effect between the laser processed Al porous structure and the re-solidified PP and the formation of chemical bond at the interface.The deep porous Al surface structure modified by laser processing largely changed the Al-PP reaction feature.The evidence of the C-O-Al chemical bond was first time found at the non-polar plastic/Al joint interface,which was the reaction result between the oxide on the Al alloy surface and thermal oxidization products of the PP during welding.This study provides a new way for enhancing metal-plastic joints via surface laser treatment techniques.展开更多
In the present study,WB 2（N） films are fabricated on silicon and YG8 substrates at different N 2 pressures by reactive magnetron sputtering.The influence of N 2 partial pressure（P （N2）） on the film microstructur...In the present study,WB 2（N） films are fabricated on silicon and YG8 substrates at different N 2 pressures by reactive magnetron sputtering.The influence of N 2 partial pressure（P （N2）） on the film microstructure and characteristics is studied systematically,including the chemical composition,crystalline structure,residual stress,surface roughness as well as the surface and the cross-section morphology.Meanwhile,nano-indentation and ball-on-disk tribometer are performed to analyze the mechanical and tribological properties of the films.The results show that the addition of nitrogen apparently leads to the change of the structure from（1 0 1） to（0 0 1） orientation then to the amorphous structure with the formation of BN phase.And the addition of nitrogen can greatly refine the grain size and microstructure of the films.Furthermore,the residual stress of the film is also found to change from tensile to compressive stress as a function of P （N2）,and the compressive stress increases with P （N2）,The WB 2（N） films with small nitrogen content,which are deposited at P （N2） of 0.004 and 0.006 Pa,exhibit better mechanical,tribological and corrosion properties than those of other films.Further increase of nitrogen content accelerates the formation of BN phase and fast decreases the film hardness.In addition,the large N 2 partial pressure gives rise to the target poisoning accompanied by the increase of the target voltage and the decrease of the deposition rate.展开更多
基金supported by the Major Program of the National Natural Science Foundation of China (Grant 51490662)the Funds for Distinguished Young Scientists of Hunan Province (Grant 14JJ1016)+1 种基金the State Key Program of the National Science Foundation of China (11232004)the Heavy-duty Tractor Intelligent Manufacturing Technology Research and System Development (Grant 2016YFD0701105)
文摘Use of multidisciplinary analysis in reliabilitybased design optimization(RBDO) results in the emergence of the important method of reliability-based multidisciplinary design optimization(RBMDO). To enhance the efficiency and convergence of the overall solution process,a decoupling algorithm for RBMDO is proposed herein.Firstly, to decouple the multidisciplinary analysis using the individual disciplinary feasible(IDF) approach, the RBMDO is converted into a conventional form of RBDO. Secondly,the incremental shifting vector(ISV) strategy is adopted to decouple the nested optimization of RBDO into a sequential iteration process composed of design optimization and reliability analysis, thereby improving the efficiency significantly. Finally, the proposed RBMDO method is applied to the design of two actual electronic products: an aerial camera and a car pad. For these two applications, two RBMDO models are created, each containing several finite element models(FEMs) and relatively strong coupling between the involved disciplines. The computational results demonstrate the effectiveness of the proposed method.
基金the National Science Fund for Distinguished Young Scholars(Grant No.51725502)the major program of the National Natural Science Foundation of China(Grant No.51490662)the National Key Research and Development Project of China(Grant No.2016YFD0701105).
文摘In this paper,an uncertainty propagation analysis method is developed based on an extended sparse grid technique and maximum entropy principle,aiming at improving the solving accuracy of the high-order moments and hence the fitting accuracy of the probability density function(PDF)of the system response.The proposed method incorporates the extended Gauss integration into the uncertainty propagation analysis.Moreover,assisted by the Rosenblatt transformation,the various types of extended integration points are transformed into the extended Gauss-Hermite integration points,which makes the method suitable for any type of continuous distribution.Subsequently,within the sparse grid numerical integration framework,the statistical moments of the system response are obtained based on the transformed points.Furthermore,based on the maximum entropy principle,the obtained first four-order statistical moments are used to fit the PDF of the system response.Finally,three numerical examples are investigated to demonstrate the effectiveness of the proposed method,which includes two mathematical problems with explicit expressions and an engineering application with a black-box model.
基金support for this research was provided by the National Natural Science Foundation of China(52339004 and 52209074)Natural Science Foundation of Shandong Province(ZR2022QE079),National Key Research and Development Plan(2021YFD1900900)+3 种基金the earmarked fund for CARS-03,and the China Post-doctoral Science Foundation(BX2021363 and 2022M713394)Sunny C.Jiang was supported by US National Science Foundation(CBET 2027306,CBET 2128480,and CBET 1806066)US Bureau of Reclamation(R21AC10079-00)US Environmental Protection Agency(EPA-G2021-STAR-A1 and 84025701).
文摘The increasing demand for wastewater treatment has become a notable trend for addressing global water scarcity.However,fouling is a significant challenge for wastewater distribution engineering systems.This study provides an approach using nanobubbles(NBs)to control fouling.The antifouling capacities of three types of NBs,six oxygen concentrations,and two application procedures(prevention and removal)are investigated.The results show that NBs effectively mitigate composite fouling—including biofouling,inorganic scaling,and particulate fouling—in comparison with the non-NBs group.More specifically,hydroxyl radicals generated by the self-collapse of NBs oxidize organics and kill microorganisms in wastewater.The negatively charged surfaces of the NBs transform the crystalline form of CaCO_(3)from calcite to looser aragonite,which reduces the likelihood of ion precipitation.Furthermore,the NBs gas-liquid interfaces act as gas"bridges"between colloidal particles,enhancing the removal of particles from wastewater.Lastly,although the NBs inhibit the growth of fouling,they do not significantly remove the already adhered fouling in non-NBs treated groups.This study anticipates that the application of NBs will address the significant fouling issue for various wastewater distribution engineering systems in order to meet the global challenge of sustainable water supplies.
基金financial supports by National Key R&D Program of China (No. 2016YFB1200600 and No. 2016YFB1200504)Strategic Priority Program of the Chinese Academy of Sciences (No. XDB22000000)
文摘Different artificial two-stage ageing behaviors and their effect on stress corrosion cracking （SCC） susceptibility of AI-Zn-Mg alloy have been investigated. The experimental results show that two hardness peaks present on the second-stage ageing-hardening curve when the first-stage ageing is dealt with comparatively lower temperature than the conventional one. The first peak is caused by dispersive and evenly distributed G.P. zones, while η ′phases and coarsened G.P. zones contribute to the second peak. Tensile strength of experimental alloy raises 9.6% （33.2 MPa） and SCC susceptibility decreases 38.9% by applying the second peak ageing regime instead of conventional T73. AI-Zn-Mg alloy obtains high strength and SCC resistance due to its finely dispersive matrix precipitates （MPts）, coarsened and discontinuous grain boundary precipitates （GBPs）, as well as the narrow precipitate free zone （PFZ） in the second peak ageing condition. 2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science ＆ Technology.
文摘NiTi/Stainless Steel(SS) sheets have been welded via a vacuum electron beam welding process, with three methods(offsetting electron beam to SS side without interlayer, adding Ni interlayer and adding Fe Ni interlayer), to promote mechanical properties of the Ni Ti/SS joints. The joints with different interlayers are all fractured in the weld zone near the Ni Ti side, which is attributed to the enrichment of intermetallic compounds including Fe2 Ti and Ni3 Ti. The fracture mechanisms of different joints are strongly dependent on the types of interlayers, and the joints without interlayer, adding Ni interlayer and adding Fe Ni interlayer exhibit cleavage fracture, intergranular fracture and mixed fracture composed of cleavage and tearing ridge, respectively. Compared with the brittle laves phase Fe2 Ti, Ni3 Ti phase can exhibit certain plasticity, block the crack propagation and change the direction of crack propagation. The composite structure of Ni3 Ti and Fe2 Ti will be formed when the Fe Ni alloy is taken as the interlayer, which provides the joint excellent mechanical properties, with rupture strength of 343 MPa.
基金Supported in part by the National Key R&D Program of China(2020YFA0406300,2020YFA0406400)the National Natural Science Foundation of China(NSFC)(11625523,11635010,11735014,11835012,11935015,11935016,11935018,11961141012,12025502,12035009,12035013,12061131003,12105276,12122509,12192260,12192261,12192262,12192263,12192264,12192265,12221005,12225509,12235017)+15 种基金the Chinese Academy of Sciences(CAS)Large-Scale Scientific Facility Programthe CAS Center for Excellence in Particle Physics(CCEPP)Joint Large-Scale Scientific Facility Funds of the NSFC and CAS(U1732263,U1832103,U1832207,U2032111)CAS Key Research Program of Frontier Sciences(QYZDJ-SSW-SLH003,QYZDJ-SSW-SLH040)100 Talents Program of CASThe Institute of Nuclear and Particle Physics(INPAC)and Shanghai Key Laboratory for Particle Physics and CosmologyEuropean Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement(894790)German Research Foundation DFG(455635585),Collaborative Research Center CRC 1044,FOR5327,GRK 2149Istituto Nazionale di Fisica Nucleare,ItalyMinistry of Development of Turkey(DPT2006K-120470)National Research Foundation of Korea(NRF-2022R1A2C1092335)National Science and Technology fund of MongoliaNational Science Research and Innovation Fund(NSRF)via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation of Thailand(B16F640076)Polish National Science Centre(2019/35/O/ST2/02907)The Swedish Research CouncilU.S.Department of Energy(DE-FG02-05ER41374)。
文摘Using e^(+)e^(−)annihilation data corresponding to an integrated luminosity of 2.93 fb^(−1)taken at the center-of-mass energy√s=3.773 GeV with the BESIII detector,a joint amplitude analysis is performed on the decays D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η).The fit fractions of individual components are obtained,and large interferences among the dominant components of the decays D^(0)→a_(1)(1260)π,D^(0)→π(1300)π,D^(0)→ρ(770)ρ(770),and D^(0)→2(ππ)_(S)are observed in both channels.With the obtained amplitude model,the CP-even fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are determined to be(75.2±1.1_(stat).±1.5_(syst.))%and(68.9±1.5_(stat).±2.4_(syst.))%,respectively.The branching fractions of D^(0)→π^(+)π^(−)π^(+)π^(−)and D^(0)→π^(+)π^(−)π^(0)π^(0)(non-η)are measured to be(0.688±0.010_(stat.)±0.010_(syst.))%and(0.951±0.025_(stat.)±0.021_(syst.))%,respectively.The amplitude analysis provides an important model for the binning strategy in measuring the strong phase parameters of D^(0)→4πwhen used to determine the CKM angleγ(ϕ_(3))via the B^(−)→DK^(−)decay.
基金supported in part by National Key R&D Program of China under Contracts Nos.2020YFA0406300,2020YFA0406400National Natural Science Foundation of China(NSFC)under Contracts Nos.12150004,11635010,11735014,11835012,11935015,11935016,11935018,11961141012,12025502,12035009,12035013,12061131003,12192260,12192261,12192262,12192263,12192264,12192265,12221005,12225509,12235017+17 种基金the Program of Science and Technology Development Plan of Jilin Province of China under Contract Nos.20210508047RQ and 20230101021JCthe Chinese Academy of Sciences(CAS)Large-Scale Scientific Facility Programthe CAS Center for Excellence in Particle Physics(CCEPP)Joint Large-Scale Scientific Facility Funds of the NSFC and CAS under Contract No.U1832207CAS Key Research Program of Frontier Sciences under Contracts Nos.QYZDJ-SSW-SLH003,QYZDJ-SSW-SLH040100 Talents Program of CASThe Institute of Nuclear and Particle Physics(INPAC)Shanghai Key Laboratory for Particle Physics and CosmologyEuropean Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement under Contract No.894790German Research Foundation DFG under Contracts Nos.455635585,Collaborative Research Center CRC 1044,FOR5327,GRK 2149Istituto Nazionale di Fisica Nucleare,ItalyMinistry of Development of Turkey under Contract No.DPT2006K-120470National Research Foundation of Korea under Contract No.NRF-2022R1A2C1092335National Science and Technology fund of MongoliaNational Science Research and Innovation Fund(NSRF)via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation of Thailand under Contract No.B16F640076Polish National Science Centre under Contract No.2019/35/O/ST2/02907The Swedish Research CouncilU.S.Department of Energy under Contract No.DE-FG02-05ER41374。
文摘The number ofψ(3686)events collected by the BESⅢdetector during the 2021 run period is determined to be(2259.3±11.1)×10~6 by counting inclusiveψ(3686)hadronic events.The uncertainty is systematic and the statistical uncertainty is negligible.Meanwhile,the numbers ofψ(3686)events collected during the 2009 and 2012run periods are updated to be(107.7±0.6)×10~6 and(345.4±2.6)×10~6,respectively.Both numbers are consistent with the previous measurements within one standard deviation.The total number ofψ(3686)events in the three data samples is(2712.4±14.3)×10~6.
基金Supported in part by the National Key R&D Program of China(2020YFA0406400,2020YFA0406300,2023YFA1606000)the National Natural Science Foundation of China(123B2077,12035009,11635010,11735014,11875054,11935015,11935016,11935018,11961141012,12025502,12035013,12061131003,12192260,12192261,12192262,12192263,12192264,12192265,12221005,12225509,12235017,12361141819)+8 种基金the Chinese Academy of Sciences(CAS)Large-Scale Scientific Facility Program,the CAS Center for Excellence in Particle Physics(CCEPP),the Joint Large-Scale Scientific Facility Funds of the NSFC and CAS(U2032104,U1832207)the Excellent Youth Foundation of Henan Scientific Commitee(242300421044)100 Talents Program of CASthe Institute of Nuclear and Particle Physics(INPAC)and Shanghai Key Laboratory for Particle Physics and Cosmology,German Research Foundation DFG(455635585,FOR5327,GRK 2149)Istituto Nazionale di Fisica Nucleare,Italy,Ministry of Development of Turkey(DPT2006K-120470)National Research Foundation of Korea(NRF-2022R1A2C1092335)National Science and Technology fund of Mongolia,National Science Research and Innovation Fund(NSRF)via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation of Thailand(B16F640076)Polish National Science Centre(2019/35/O/ST2/02907),the Swedish Research CouncilU.S.Department of Energy(DE-FG02-05ER41374)。
文摘We present a measurement of the integrated luminosity of e^(+)e^(-)collision data collected by the BESIII detector at the BEPCII collider at a center-of-mass energy of Ecm=3.773 GeV.The integrated luminosities of the datasets taken from December 2021 to June 2022,from November 2022 to June 2023,and from October 2023 to February 2024 were determined to be 4.995±0.019 fb^(-1),8.157±0.031 fb^(-1),and 4.191±0.016 fb^(-1),respectively,by analyzing large angle Bhabha scattering events.The uncertainties are dominated by systematic effects,and the statistical uncertainties are negligible.Our results provide essential input for future analyses and precision measurements.
基金National Natural Science Foundation of China(Grant No.12075227)the National Natural Science Foundation of China-NSAF(Grant No.U2130121)+1 种基金the National Key Research and Development Program of China(Grant No.2016YFA0401102)the Science Challenge Project(Grant No.TZ2018005).
文摘The target backsheath field acceleration mechanism is one of the main mechanisms of laser-driven proton acceleration(LDPA)and strongly depends on the comprehensive performance of the ultrashort ultra-intense lasers used as the driving sources.The successful use of the SG-II Peta-watt(SG-II PW)laser facility for LDPA and its applications in radiographic diagnoses have been manifested by the good performance of the SG-II PW facility.Recently,the SG-II PW laser facility has undergone extensive maintenance and a comprehensive technical upgrade in terms of the seed source,laser contrast and terminal focus.LDPA experiments were performed using the maintained SG-II PW laser beam,and the highest cutoff energy of the proton beam was obviously increased.Accordingly,a double-film target structure was used,and the maximum cutoff energy of the proton beam was up to 70 MeV.These results demonstrate that the comprehensive performance of the SG-II PW laser facility was improved significantly.
基金Supported in part by National Key R&D Program of China(Grant Nos.2020YFA0406400,2020YFA0406300)National Natural Science Foundation of China(NSFC)(Grant Nos.11635010,11735014,11805086,11835012,11935015,11935016,11935018,11961141012,12022510,12025502,12035009,12035013,12192260,12192261,12192262,12192263,12192264,12192265)+18 种基金the Chinese Academy of Sciences(CAS)Large-Scale Scientific Facility ProgramJoint Large-Scale Scientific Facility Funds of the NSFC and CAS(Grant No.U1832207)the CAS Center for Excellence in Particle Physics(CCEPP)100 Talents Program of CASFundamental Research Funds for the Central Universities,Lanzhou University,University of Chinese Academy of SciencesThe Institute of Nuclear and Particle Physics(INPAC)and Shanghai Key Laboratory for Particle Physics and CosmologyERC(Grant No.758462)European Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement(Grant No.894790)German Research Foundation DFG(Grant No.443159800),Collaborative Research Center CRC 1044,GRK 2149Istituto Nazionale di Fisica Nucleare,ItalyMinistry of Development of Turkey(Grant No.DPT2006K-120470)National Science and Technology fundNational Science Research and Innovation Fund(NSRF)via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation(Grant No.B16F640076)Olle Engkvist Foundation(Grant No.200-0605)STFC(United Kingdom)Suranaree University of Technology(SUT),Thailand Science Research and Innovation(TSRI),and National Science Research and Innovation Fund(NSRF)(Grant No.160355)The Royal Society,UK(Grant Nos.DH140054,DH160214)The Swedish Research CouncilU.S.Department of Energy(Grant No.DE-FG02-05ER41374)。
文摘We report a search for a heavier partner of the recently observed Z_(cs)(3985)^(-) state,denoted as Z_(cs)^('-),in the process e^(+)e^(−)→K^(+)D_(s)^(∗−) D^(∗0 )+ c.c.,based on e^(*)e^(-)collision data collected at the center-of-mass energies of √s=4.661,4.682 and 4.699 GeV with the BESIII detector.The Z_(cs)^('-) is of interest as it is expected to be a candidate for a hidden-charm and open-strange tetraquark.A partial-reconstruction technique is used to isolate K^(+)recoil-mass spectra,which are probed for a potential contribution from Z_(cs)^('-)→D_(s)^(∗−) D^(∗0 )+ c.c.We find an excess of Z_(cs)^('-)→D_(s)^(*-)-D^(*0)(c.c.)candidates with a significance of 2.1o,after considering systematic uncertainties,at a mass of(4123.5±0.7_(sat)±4.7_(syst.))MeV/c^(2).As the data set is limited in size,the upper limits are evaluated at the 90%confidence level on the product of the Born cross sections(σ^(Borm))and the branching fraction(B)of Z_(cs)^('-)→D_(s)^(*-)-D^(*0),under different assumptions of the Z_(cs)^('-) mass from 4.120 to 4.140 MeV and of the width from 10 to 50 MeV at the three center-of-mass energies.The upper limits of σ^(Born).B are found to be at the level of O(1)pb at each energy.Larger data samples are needed to confirm the Z_(cs)^('-) state and clarify its nature in the coming years.
基金the National Key R&D Program of China(No.2016YFB1200602)the Strategic Priority Program of the Chinese Academy of Sciences(No.XDB22020200)the Shenyang Key R&D and Technology Transfer program(No.Z19–1–004)。
文摘Enhancing the strength of Al-Zn-Mg alloys is critical to the weight-lightening of structural components in the application of high-speed trains and aerospace industries,while high stress corrosion cracking(SCC)susceptibility of Al-Zn-Mg alloys(especially the alloy with high recrystallization fraction)with high strength makes it difficult.In this study,the influence of tensile stress-aging coupled with natural aging pre-treatment on the mechanical properties and SCC resistance of Al-Zn-Mg alloy with high recrystallization fraction has been investigated.The results show that tensile stress-aging at 160℃can inhibit the dissolution of clusters/Guinier-Preston(GP)zones formed during long-term natural aging pre-treatment,which increases the number density of matrix precipitates(MPts),narrow the width of precipitate free zone(PFZ),and dramatically improve the mechanical properties of the experimental Al-Zn-Mg alloy.Meanwhile,the precipitation of the high density of MPts within the matrix will assume a large number of solute atoms during artificial aging,which will reduce the supplement of solute atoms to grain boundaries.As a result,the volume of anodic active grain boundary precipitates(GBPs)and the content of free solute atoms at grain boundaries are reduced,which reduces the possibility of initial nucleation and propagation of SCC crack.The coupled treatment method proposed in this study proves efficient in resolving the contradiction between the strength and SCC resistance in Al-Zn-Mg alloy.
基金supported by the National Natural Science Foundation of China(NSFC,Nos.11988101 and 11833009)the Key Research Program of the Chinese Academy of Sciences(Grant No.QYZDJ-SSWSLH021)+6 种基金supported by the Cultivation Project for the FAST scientific Payoff and Research Achievement of CAMS-CASsupported by the Key Research Project of Zhejiang Lab no.2021PE0AC0supported by the National SKA Program of China(2020SKA0120100)the National Key R&D Program of China(2017YFA0402602)the National Natural Science Foundation of China(No.12041303)the CAS-MPG LEGACY projectfunding from the MaxPlanck Partner Group。
文摘We report the properties of more than 600 bursts(including cluster-bursts)detected from the repeating fast radio burst(FRB)source FRB 20201124A with the Five-hundred-meter Aperture Spherical radio Telescope during an extremely active episode on UTC 2021 September 25–28,in a series of four papers.The observations were carried out in the band of 1.0–1.5 GHz by using the center beam of the L-band 19-beam receiver.We monitored the source in sixteen1 hr sessions and one 3 hr session spanning 23 days.All the bursts were detected during the first four days.In this first paper of the series,we perform a detailed morphological study of 624 bursts using the two-dimensional frequencytime“waterfall”plots,with a burst(or cluster-burst)defined as an emission episode during which the adjacent emission peaks have a separation shorter than 400 ms.The duration of a burst is therefore always longer than 1 ms,with the longest up to more than 120 ms.The emission spectra of the sub-bursts are typically narrow within the observing band with a characteristic width of~277 MHz.The center frequency distribution has a dominant peak at about 1091.9 MHz and a secondary weak peak around 1327.9 MHz.Most bursts show a frequencydownwarddrifting pattern.Based on the drifting patterns,we classify the bursts into five main categories:downward drifting(263)bursts,upward drifting(3)bursts,complex(203),no drifting(35)bursts,and no evidence for drifting(121)bursts.Subtypes are introduced based on the emission frequency range in the band(low,middle,high and wide)as well as the number of components in one burst(1,2,or multiple).We measured a varying scintillation bandwidth from about 0.5 MHz at 1.0 GHz to 1.4 MHz at 1.5 GHz with a spectral index of 3.0.
基金supported by the National Science Foundation under NSF-NIRT-0709293 and NSF-DMR-0934218the State of Texas through the ARP Program under 003656-0103-2007the Texas Center for Superconductivity at the University of Houston.
文摘Environment friendly ferroelectric relaxor Ba(Zr_(0.2)Ti_(0.8))O_(3)thin fims with the addition of 2%Mn dopant were grown on(001)MgO substrates by pulsed laser deposition.Microstructure studies with X-ray di®raction and transmission electron microscopy reveal that the as-grown Ba(Zr_(0.2)Ti_(0.8))O_(3) thin films are c-axis oriented with an atomic sharp interface.The films have good single crystallinity and good epitaxial quality.The interface relationship was determined to be[100]Mn.BZT//[100]MgO and(001)Mn.BZT//(001)MgO.Nanoscale order/disorder relaxor structures were found with nano-columnar structures.The microwave dielectric measurements(15-18GHz)indicate that the¯lms have excellent dielectric properties with large dielectric constant value,high tunability,and low dielectric loss,promising the development of room temperature tunable microwave elements.
文摘In order to improve the performances of electroplating permanent magnetic films, neodymium is introduced into the electroplating CoNiMnP permanent magnetic films. The influences of the neodymium content are also investigated by varying NdCl3 plating bath concentration. The neodymium-doped films are analyzed by energy dispersive spectrum (EDS), vibrating sample magnetometer (VSM) and magnetic force microscope (MFM). The experimental results show that high magnetic performances of CoNdNiMnP permanent magnetic films with vertical anisotropy could be fabricated with current density 5mA/cm2 at room temperature. With the increasing of neodymium contents, the magnetic properties of films were improved. However when neodymium contents exceeded 3.5wt%, the magnetic properties of films are not improved any more. The increase of film magnetic properties results from the ferromagnetic-coupling between light rare earth element-neodymium and transition metal element-cobalt.
文摘The influences of plating bath solution PH and current density on coercivity of electroplating CoNdNiMnP permanent magnetic film arrays were studied. The experiment results show that both for solution PH and current density there were the best depositing parameters. Too high and too low plating bath solution PH or current density both result in decreasing of the film array coercivity. When solution PH is 3.5 and current density is 5mA/cm2, the prepared film array coercivity can reach the maximum.
基金supported by the National Natural Science Foundation of China(No.50001008).
文摘Results presented in this paper contribute to investigation of the granulation mechanisms of γ+(Fe,Mn)3C eutectics in the austenite matrix composites (abbreviated EAMC). The specimens corresponding to the nominal composition of eutectic with controlled RE(Ce)-Mg agent modifier additions have been unidirectional solidified with a constant growth rate of 2.18μm/s at a fixed temperature gradient of 800K/cm using vertical Bridgeman method. With the RE-Mg agent modifier, the transition of solid/liquid (S/L) interface from columnar to dendrite (CDT), refinement and developed branching of γ and (Fe,Mn)3C phases in the eutectics, and the transition of growth style from faceted-nonfaceted (F/NF) to nonfaceted-nonfaceted (NF/NF) for γ and (Fe,Mn)3C phases in the eutectic have been observed and investigated theoretically. Those can explain the granulation of γ+(Fe,Mn)3C eutectics in the as cast because the roundness increases with the developed lateral branching of primary austenite dendrites, refinement of eutectics, and NF/NF growth of γ and (Fe,Mn)3C phases in the eutectic.
基金supported by the National Natural Science Foundations of China(Grant No.50001008 and No.50271042).
文摘Results presented in this paper contribute to investigation of the effect of the added Ca-Si modifier amount ( ) on the microstructure scales of granular γ-(Fe,Mn)3C eutectics such as the volume fraction (f) and diameter (d) in the austenite steel matrix composites (EAMC). Directional solidification of EAMC has been carried out using vertical Bridgman method at 50.6μms-1 with a constant temperature gradient about 800Kcm-1. The higher constitutional supercooling ahead of solid-liquid interface attributing to the larger results in the enlargement of γ-(Fe,Mn)3C coupled-zone and the increment of the nucleation rate of eutectics. Therefore, f increases with increasing . The branches of the primary austenite dendrites develop more greatly as increases, which limits the growth of eutectics. As a result, d decreases with increasing .
基金supported by the National Natural Science Foundation of China(grant number 12075306)Strategic Priority Research Program of the Chinese Academy of Sciences(grant number XDB16010600)+4 种基金Key Research Programs in Frontier Science(grant number ZDBSLY-SLH006)Shanghai special science and technology innovation supported project(grant number 2019-jmrh1-kj1)Advanced research using high-intensity laser-produced photons and particles(ADONISgrant number CZ.02.1.01/0.0/0.0/16019/0000789)and High Field Initiative(HiFI,grant number CZ.02.1.01/0.0/0.0/15003/0000449)financial support of the Ministry of Education,Youth and Sports as part of targeted support from the National Programme of Sustainability Ⅱ。
文摘A new near-infrared direct acceleration mechanism driven by Laguerre-Gaussian laser is proposed to stably accelerate and concentrate electron slice both in longitudinal and transversal directions in vacuum.Three-dimensional simulations show that a 2-μm circularly polarized LG_(p)^(l)(p=0,l=1,σ_(2)=-1)laser can directly manipulate attosecond electron slices in additional dimensions(angular directions)and give them annular structures and angular momentums.These annular vortex attosecond electron slices are expected to have some novel applications such as in the collimation of antiprotons in conventional linear accelerators,edge-enhancement electron imaging,structured X-ray generation,and analysis and manipulation of nanomaterials.
基金supported by the National Natural Science Foundation of China (Nos. 51975553 and 51931009)IMR SYNL-T.S. Kê Research Fellowship。
文摘Strong metal/non-polar plastic dissimilar joints are highly demanded for the lightweight design in many fields,which,however,are rather challenging to achieve directly via welding.In this study,we designed a laser processing pretreatment on the Al alloy to create a deep porous Al surface structure,which was successfully joined to the polypropylene(PP) via friction spot welding.A maximum joint strength of29 MPa was achieved,the same as that of the base PP(i.e.the joint efficiency reached 100%),much larger than ever reported.The joining mechanism of the Al alloy and the PP was mainly attributed to the large mechanical interlocking effect between the laser processed Al porous structure and the re-solidified PP and the formation of chemical bond at the interface.The deep porous Al surface structure modified by laser processing largely changed the Al-PP reaction feature.The evidence of the C-O-Al chemical bond was first time found at the non-polar plastic/Al joint interface,which was the reaction result between the oxide on the Al alloy surface and thermal oxidization products of the PP during welding.This study provides a new way for enhancing metal-plastic joints via surface laser treatment techniques.
基金supported by the National Key Basic Research Program of China (973 Program,No.2012CB625100)the Natural Science Foundation of Liaoning Province of China (No.2013020093)
文摘In the present study,WB 2（N） films are fabricated on silicon and YG8 substrates at different N 2 pressures by reactive magnetron sputtering.The influence of N 2 partial pressure（P （N2）） on the film microstructure and characteristics is studied systematically,including the chemical composition,crystalline structure,residual stress,surface roughness as well as the surface and the cross-section morphology.Meanwhile,nano-indentation and ball-on-disk tribometer are performed to analyze the mechanical and tribological properties of the films.The results show that the addition of nitrogen apparently leads to the change of the structure from（1 0 1） to（0 0 1） orientation then to the amorphous structure with the formation of BN phase.And the addition of nitrogen can greatly refine the grain size and microstructure of the films.Furthermore,the residual stress of the film is also found to change from tensile to compressive stress as a function of P （N2）,and the compressive stress increases with P （N2）,The WB 2（N） films with small nitrogen content,which are deposited at P （N2） of 0.004 and 0.006 Pa,exhibit better mechanical,tribological and corrosion properties than those of other films.Further increase of nitrogen content accelerates the formation of BN phase and fast decreases the film hardness.In addition,the large N 2 partial pressure gives rise to the target poisoning accompanied by the increase of the target voltage and the decrease of the deposition rate.
