Natural killer T （NKT） cells are innate-like lymphocytes that generally recognize lipid antigens and are enriched in microvascular compartments of the liver. NKT cells can be activated by self- or microbial-lipid an...Natural killer T （NKT） cells are innate-like lymphocytes that generally recognize lipid antigens and are enriched in microvascular compartments of the liver. NKT cells can be activated by self- or microbial-lipid antigens and by signaling through toll-like receptors. Following activation, NKT cells rapidly secrete pro-inflammatory or anti- inflammatory cytokines and chemokines, and thereby determine the milieu for subsequent immunity or tolerance. It is becoming clear that two different subsets of NKT cells-type I and type II--have different modes of antigen recognition and have opposing roles in inflammatory liver diseases. Here we focus mainly on the roles of both NKT cell subsets in the maintenance of immune tolerance and inflammatory diseases in liver. Furthermore, how the differential activation of type I and type II NKT cells influences other innate cells and adaptive immune cells to result in important consequences for tissue integrity is discussed. It is crucial that better reagents, including CDld tetramers, be used in clinical studies to define the roles of NKT cells in liver diseases in patients.展开更多
The performance of a well-designed layer of sand, and composites like layer of sand mixed with shredded rubber tire (RSM) as low cost base isolators, is studied in shake table tests in the laboratory. The building fou...The performance of a well-designed layer of sand, and composites like layer of sand mixed with shredded rubber tire (RSM) as low cost base isolators, is studied in shake table tests in the laboratory. The building foundation is modeled by a 200 mm by 200 mm and 40 mm thick rigid plexi-glass block. The block is placed in the middle of a 1m by 1m tank filled with sand. The selected base isolator is placed between the block and the sand foundation. Accelerometers are placed on top of the footing and foundation sand layer. The displacement of the footing is also measured by LVDT. The whole setup is mounted on a shake table and subjected to sinusoidal motions with varying amplitude and frequency. Sand is found to be effective only at very high amplitude (> 0.65 g) of motions. The performance of a composite consisting of sand and 50% shredded rubber tire placed under the footing is found to be most promising as a low-cost effective base isolator.展开更多
Porous and functionally graded materials have seen extensive applications in modern biomedical devices—allowing for improved site-specific performance;their appreciable mechanical,corrosive,and biocompatible properti...Porous and functionally graded materials have seen extensive applications in modern biomedical devices—allowing for improved site-specific performance;their appreciable mechanical,corrosive,and biocompatible properties are highly sought after for lightweight and high-strength load-bearing orthopedic and dental implants.Examples of such porous materials are metals,ceramics,and polymers.Although,easy to manufacture and lightweight,porous polymers do not inherently exhibit the required mechanical strength for hard tissue repair or replacement.Alternatively,porous ceramics are brittle and do not possess the required fatigue resistance.On the other hand,porous biocompatible metals have shown tailorable strength,fatigue resistance,and toughness.Thereby,a significant interest in investigating the manufacturing challenges of porous metals has taken place in recent years.Past research has shown that once the advantages of porous metallic structures in the orthopedic implant industry have been realized,their biological and biomechanical compatibility—with the host bone—has been followed up with extensive methodical research.Various manufacturing methods for porous or functionally graded metals are discussed and compared in this review,specifically,how the manufacturing process influences microstructure,graded composition,porosity,biocompatibility,and mechanical properties.Most of the studies discussed in this review are related to porous structures for bone implant applications;however,the understanding of these investigations may also be extended to other devices beyond the biomedical field.展开更多
Gastrointestinal（GI） parasitism is the most serious constraint throughout the world in small ruminants which causes significant production loss in animals.GI parasites are major contributor to reduce productivity in...Gastrointestinal（GI） parasitism is the most serious constraint throughout the world in small ruminants which causes significant production loss in animals.GI parasites are major contributor to reduce productivity in terms of meat,milk and wool in animals.Control of GI parasite is done primarily by anthelmintic treatment where choice and schedule of treatment is done after identification and quantitation of individual parasite.Identification of GI parasites is done through microscopic method by identifying specific morphological characteristics of egg and larva（L<sub>3</sub>）.Since most of parasite eggs are having similar morphological characteristics, identification up to species level through microscopy is not possible in most of cases.To address this issue,molecular techniques are the viable alternative for identification of species as well as molecular level differences within a species（isolates） of parasites.Different DNA based molecular techniques viz.PCR,AFLP,RAPD,RFLP,PCR-SSCP,real time PCR,DNA microarray etc.have been used for identification and to assess the genetic diversity among parasite population.For identification of species,the characteristic sequence of genomic DNA of different species should differ to allow the delineation of species,but at the same time,no/minor variation within the species should exist.In contrast,for purpose of identifying population variants（strains/isolates）, a considerable degree of variation in the sequence should exist within a species.Various target regions,including nuclear ribosomal DNA（rDNA）,mitochondrial DNA（mtDNA） or repetitive DNA elements（microsatellite loci）,which show considerable variation in the number of repeats within individuals have been employed to achieve the identification of parasites species or strain.展开更多
The quantification of phosphorus(P) in bulk soil and P distribution in different size fractions of water-stable aggregates(WSAs)are important for assessing potential P loss through runoff. We evaluated available and t...The quantification of phosphorus(P) in bulk soil and P distribution in different size fractions of water-stable aggregates(WSAs)are important for assessing potential P loss through runoff. We evaluated available and total P distribution within WSAs of a sitty clay to clay soil in a long-term fertility experiment of a rice-wheat cropping system in India. Surface soil samples were collected from seven plots amended with NPK fertilizers in combination with or without organic amendments, farmyard manure(FYM), green manure(GM), and paddy straw(PS). The plot with no NPK fertilizers or organic amendments was set as a control. The soil samples were separated by wet sieving into four soil aggregate size fractions: large macroaggregates(> 2.0 mm), small macroaggregates(0.25–2.0 mm), fine microaggregates(0.05–0.25 mm), and a silt + clay-sized fraction(< 0.05 mm). Structural indices were higher in the soil receiving organic amendments than in the soil receiving inorganic fertilizer alone. Organically amended soil had a higher proportion of stable macroaggregates than the control and the soil receiving inorganic fertilizer alone, which were rich in microaggregates. Total and available P contents within WSAs were inversely related to the aggregate size, irrespective of treatment. The distribution of available and total P in the soil aggregate size fraction was as follows: silt + clay-size fraction > small macroaggregates > fine microaggregates> large macroaggregates. Within a size class, aggregate-associated available and total P contents in the organically amended soil were in the following order: FYM > PS ≥ GM. The available P content of the microaggregates(< 0.25 mm) was 8-to 10-times higher than that of the macroaggregates(> 0.25 mm), and the total P content of the microaggregates was 4-to 5-times higher than that of the macroaggregates. Cultivation without organic amendments resulted in more microaggregates that could be checked by the application of organic amendments such as FYM and GM, which increased the proport展开更多
Additive manufacturing provides achievability for the fabrication of bimetallic and multi-material structures;however,the material compatibility and bondability directly affect the parts’formability and final quality...Additive manufacturing provides achievability for the fabrication of bimetallic and multi-material structures;however,the material compatibility and bondability directly affect the parts’formability and final quality.It is essential to understand the underlying printability of different material combinations based on an adapted process.Here,the printability disparities of two common and attractive material combinations(nickel-and iron-based alloys)are evaluated at the macro and micro levels via laser directed energy deposition(DED).The deposition processes were captured using in situ high-speed imaging,and the dissimilarities in melt pool features and track morphology were quantitatively investigated within specific process windows.Moreover,the microstructure diversity of the tracks and blocks processed with varied material pairs was comparatively elaborated and,complemented with the informative multi-physics modeling,the presented non-uniformity in mechanical properties(microhardness)among the heterogeneous material pairs was rationalized.The differences in melt flow induced by the unlike thermophysical properties of the material pairs and the resulting element intermixing and localized re-alloying during solidification dominate the presented dissimilarity in printability among the material combinations.This work provides an in-depth understanding of the phenomenological differences in the deposition of dissimilar materials and aims to guide more reliable DED forming of bimetallic parts.展开更多
The Circular Electron Positron Collider(CEPC)is a large scientific project initiated and hosted by China,fostered through extensive collaboration with international partners.The complex comprises four accelerators:a 3...The Circular Electron Positron Collider(CEPC)is a large scientific project initiated and hosted by China,fostered through extensive collaboration with international partners.The complex comprises four accelerators:a 30 GeV Linac,a 1.1 GeV Damping Ring,a Booster capable of achieving energies up to 180 GeV,and a Collider operating at varying energy modes(Z,W,H,and tt).The Linac and Damping Ring are situated on the surface,while the subterranean Booster and Collider are housed in a 100 km circumference underground tunnel,strategically accommodating future expansion with provisions for a potential Super Proton Proton Collider(SPPC).The CEPC primarily serves as a Higgs factory.In its baseline design with synchrotron radiation(SR)power of 30 MW per beam,it can achieve a luminosity of 5×10^(34)cm^(-2)s^(-1)per interaction point(IP),resulting in an integrated luminosity of 13 ab^(-1)for two IPs over a decade,producing 2.6 million Higgs bosons.Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons,facilitating precise measurements of Higgs coupling at sub-percent levels,exceeding the precision expected from the HL-LHC by an order of magnitude.This Technical Design Report(TDR)follows the Preliminary Conceptual Design Report(Pre-CDR,2015)and the Conceptual Design Report(CDR,2018),comprehensively detailing the machine's layout,performance metrics,physical design and analysis,technical systems design,R&D and prototyping efforts,and associated civil engineering aspects.Additionally,it includes a cost estimate and a preliminary construction timeline,establishing a framework for forthcoming engineering design phase and site selection procedures.Construction is anticipated to begin around 2027-2028,pending government approval,with an estimated duration of 8 years.The commencement of experiments and data collection could potentially be initiated in the mid-2030s.展开更多
Bacterial colonization of orthopedic implants is one of the leading causes of failure and clinical complexities for load-bearing metallic implants. Topical or systemic administration of antibiotics may not offer the m...Bacterial colonization of orthopedic implants is one of the leading causes of failure and clinical complexities for load-bearing metallic implants. Topical or systemic administration of antibiotics may not offer the most efficient defense against colonization, especially in the case of secondary infection, leading to surgical removal of implants and in some cases even limbs. In this study, laser powder bed fusion was implemented to fabricate Ti3Al2V alloy by a 1:1 weight mixture of CpTi and Ti6Al4V powders. Ti-Tantalum(Ta)–Copper(Cu) alloys were further analyzed by the addition of Ta and Cu into the Ti3Al2V custom alloy. The biological,mechanical, and tribo-biocorrosion properties of Ti3Al2V alloy were evaluated. A 10 wt.% Ta(10Ta) and 3 wt.% Cu(3Cu) were added to the Ti3Al2V alloy to enhance biocompatibility and impart inherent bacterial resistance. Additively manufactured implants were investigated for resistance against Pseudomonas aeruginosa and Staphylococcus aureus strains of bacteria for up to 48 h. A 3 wt.% Cu addition to Ti3Al2V displayed improved antibacterial efficacy, i.e.78%–86% with respect to CpTi. Mechanical properties for Ti3Al2V–10Ta–3Cu alloy were evaluated, demonstrating excellent fatigue resistance, exceptional shear strength, and improved tribological and tribo-biocorrosion characteristics when compared to Ti6Al4V. In vivo studies using a rat distal femur model revealed improved early-stage osseointegration for alloys with10 wt.% Ta addition compared to CpTi and Ti6Al4V. The 3 wt.% Cu-added compositions displayed biocompatibility and no adverse infammatory response in vivo. Our results establish the Ti3Al2V–10Ta–3Cu alloy’s synergistic effect on improving both in vivo biocompatibility and microbial resistance for the next generation of load-bearing metallic implants.展开更多
Lump lime as a fiux material in a basic oxygen furnace （BOF） often creates problems in operation due to its high melting point, poor dissolution property, hygroscopic nature, and fines generation tendency. To allevi...Lump lime as a fiux material in a basic oxygen furnace （BOF） often creates problems in operation due to its high melting point, poor dissolution property, hygroscopic nature, and fines generation tendency. To alleviate these problems, fluxed lime iron oxide pellets （FLIP） containing 30% CaO were developed in this study using waste iron oxide fines and lime. The suitable handling strengths of the pellet （crushing strength： 300 N; drop strength： 130 times） of FLIP were developed by treating with CO2 or industrial waste gas at room temperature, while no separate binders were used. When the pellet was added into hot metal bath （carbon-containing molten iron）, it was decomposed, melted, and transformed to produce low melting oxidizing slag, because it is a combination of main CaO and Fe2O3. This slag is suitable for facilitating P and C removal in refining. Furthermore, the pellet enhances waste utilization and use of CO2 in waste gas. In this article, emphasis is given on studying the behavior of these pellets in hot metal bath during melting and refining along with thermodynamics and kinetics analysis. The observed behaviors of the pellet in hot metal bath confirm that it is suitable and beneficial for use in BOF and replaces lump lime.展开更多
Background and Objectives:The cases of apparent natural deaths are encountered in the hospital casualties who are noted dead at the time of the first medical attention and as such are labeled as“Brought Dead.”These ...Background and Objectives:The cases of apparent natural deaths are encountered in the hospital casualties who are noted dead at the time of the first medical attention and as such are labeled as“Brought Dead.”These include the cases of sudden death,unexplained death,and unattended death.The cause of such deaths is reported in the literature to emanate principally from the cardiovascular system,though there are some documented geographical,racial,and other variations.In the present study,we endeavored to detect the cause of such natural deaths in terms of the disease and the organ system involved,in the deceased individuals of the contemporary Bengali population,with cases due to obvious unnatural causes being excluded.Materials and Methods:An observational,cross-sectional study with 105(n=105,male:89,female:16)study subjects of age group of 20-80 years,selected by systemic random sampling,from the brought dead subjects coming to the mortuary of the NRS Medical College and Hospital for medicolegal autopsy from April 2011 to March 2012,excluding cases having a history of the obvious unnatural event.Organ system-wise gross examination was done,followed by tissue sampling for histopathological examination.The case-wise findings were tabulated and analyzed for descriptive statistics using SPSS software.Results:In the present study,89 cases were male(84.8%)and 16 cases were female(15.2%),which reflects a male:female ratio of 5.56:1.The dead bodies are mostly recovered from the footpaths(47 cases,44%).Sixty-four(61%)cases are of known identity.In 54 cases out of 105(51.4%),morbid pathology is detected in the respiratory system(RS),lobar pneumonia,and cavitary pulmonary tuberculosis being the most frequent disease entity,in both genders.Fifty-one years-sixty-five years is found to be the most commonly affected age group,in both genders.Interpretation and Conclusions:The present study shows that the most common organ system involved in brought dead cases is the RS,which is supported by a few Indian studies.展开更多
AIM：To evaluate the protective activity of allylpyrocatechol （APC）, the major antioxidant constituent of Piper betel, against the indomethacin-induced stomach ulceration in the rat model and correlates with its ant...AIM：To evaluate the protective activity of allylpyrocatechol （APC）, the major antioxidant constituent of Piper betel, against the indomethacin-induced stomach ulceration in the rat model and correlates with its antioxidative and mucin protecting properties.METHODS： Male Sprague-Dawley rats were divided into five groups. Normal control rats （group Ⅰ ） were given the vehicle oral dose of gum acacia in distilled water （1 mL per rat）; ulcerated control and treated rats （groups Ⅱ-V） were given a single dose of indomethacin （30 mg/kg body wt.）; group Ⅱ rats were sacrificed 4 h after indomethacin administration; groups Ⅲ-Ⅴ rats were given the vehicle （1 mL per rat） or APC （2 mg/kg body wt.） or misoprostol （1.43 μg/kg body wt.） once daily by oral intubation for 7 d starting from 4 h after the indomethacin administration. After 7 d, the stomach tissues were excised for histological examination and biochemical analysis. RESULTS： Treatment with APC （2 mg/kg body wt per day） and misoprostol （1.43 μg/kg body wt per day） for 7 d could effectively heal the stomach ulceration as revealed from the ulcer index and histopathological studies. Compared to the zero day ulcerated group, treatment with APC and misoprostol reduced the ulcer index by 93.4% and 85.4% respectively （P 〈 0.05）. Both APC and misoprostol accelerated ulcer healing observed in natural recovery （P 〈 0.05）, their respective healing capacities not being significantly different. The healing capacities of APC and misoprostol could be attributed to their antioxidant activity as well as the ability to enhance the rnucin content of the gastric tissues. Compared to the ulcerated untreated rats, those treated with APC and rnisoprostol showed near normal MDA levels, while the protein levels were 86% and 78% of the normal value respectively （P 〈 0.05）. Likewise, both APC and rnisoprostol increased the SOD, catalase, and rnucin levels significantly （P 〈 0.05）, the effect of APC being better. CON展开更多
Occupants are the core of the built environment.Traditional heating,ventilation,and air-conditioning(HVAC)systems operate with predefined schedules and maximum occupancy assumptions with no consideration of specific o...Occupants are the core of the built environment.Traditional heating,ventilation,and air-conditioning(HVAC)systems operate with predefined schedules and maximum occupancy assumptions with no consideration of specific occupant information.These generalized assumptions usually do not align with the actual demand and result in over-conditioning and occupant discomfort.In recent years,with the aid of Information&Communication Technology(ICT)and Computer Science(CS),it is possible to acquire real-time and accurate occupant information to satisfy the exact thermal requirement through specific HVAC control in one particular built environment.This mechanism is called HVAC“Occupant-centric Control(OCC).”HVAC OCC strategy starts with collecting the occupant’s information(e.g.,presence/absence)and then applies it to meet the occupant’s requirement(e.g.,thermal comfort).However,even though some research studies and field pilot demonstrations have been devoted to the field of OCC,there is a lack of systematic knowledge about occupant data,which is the principal component of OCC for HVAC researchers and practitioners.To fill this gap,this review paper discusses OCC with a particular emphasis on occupant information and investigates how this information can assist HVAC operation in providing an acceptable built environment in required spaces during the required time.We provide a fine-grained,comprehensive picture of occupant information,discuss its features,the modalities of information feed-in into the HVAC control,and the application of commonly utilized occupant information for OCC.展开更多
AIM To evaluate the impact of pioglitazone pharmacotherapy in median nerve electrophysiology in the carpal tunnel among type 2 diabetes patients.METHODS The study was executed in patients with type 2 diabetes, treated...AIM To evaluate the impact of pioglitazone pharmacotherapy in median nerve electrophysiology in the carpal tunnel among type 2 diabetes patients.METHODS The study was executed in patients with type 2 diabetes, treated with oral drugs, categorized under pioglitazone or non-pioglitazone group(14 in each group), and who received electrophysiological evaluation by nerve conduction velocity at baseline and 3 mo.RESULTS At 3 mo, pioglitazone-category had inferior amplitude in sensory median nerve [8.5 interquartile range(IQR) = 6.5 to 11.5) vs non-pioglitazone 14.5(IQR 10.5 to 18.75)](P = 0.002). Non-pioglitazone category displayed amelioration in amplitude in the sensory median nerve [baseline 13(IQR = 9 to 16.25) vs 3 mo 8.5(IQR = 6.5 to 11.5)](P = 0.01) and amplitude in motor median nerve [baseline 9(IQR = 4.75 to 11) vs 3 mo 6.75(IQR = 4.75 to 10.25)](P = 0.049); and deterioration of terminal latency of in motor ulnar nerve [baseline 2.07(IQR = 1.92 to 2.25) vs 3 mo 2.16(IQR = 1.97 to 2.325)](P = 0.043). There was amelioration of terminal latency in sensory ulnar nerve [baseline 2.45(IQR = 2.315 to 2.88) vs 3 mo 2.37(IQR = 2.275 to 2.445) for pioglitazone group(P = 0.038).CONCLUSION Treatment with pioglitazone accentuates probability of compressive neuropathy. In spite of comparable glycemic control over 3 mo, patients treated with pioglitazone showed superior electrophysiological parameters for the ulnar nerve. Pioglitazone has favourable outcome in nerve electrophysiology which was repealed when the nerve was subjected to compressive neuropathy.展开更多
The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in orde...The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.展开更多
Purpose: Myocardial revascularization by coronary artery bypass grafting (CABG) in ischemic heart disease patients has direct impact on hemodynamic parameters in the immediate post-operative period. The peri-operative...Purpose: Myocardial revascularization by coronary artery bypass grafting (CABG) in ischemic heart disease patients has direct impact on hemodynamic parameters in the immediate post-operative period. The peri-operative cardiovascular functioning is an important determinant for outcome of surgery. In On-Pump CABG (ONCAB), the cardiopulmonary bypass has a negative effect on myocardium. Off-Pump CABG (OPCAB) avoids the effect of CPB but complete revascularization with difficult positioning of heart is technically demanding. This study is aimed to compare the cardiovascular functioning in the immediate post-operative period after OPCAB and ONCAB. Methods: Total 106 patients were operated for CABG from January 2015 to June 2016, of which 75 patients were operated for OPCAB and 31 patients were operated for ONCAB. For the comparison, hemodynamic parameters were measured during anesthesia before surgery, postoperatively after 1 and 4 hours (h) in the ICU, and in the morning after surgery, approximately after 20 h. Results: The time-dependent rise of hemodynamic parameters like Cardiac Output (CO), Cardiac Index (CI), Stroke volume (SV) and Left Ventricular Stroke Work Index (LVSWI) in the immediate post-operative hours (1 h and 4 h) are more predominant in OPCAB group than ONCAB group although the difference is eliminated mostly at 20 h. The better peripheral vasodilation after OPCAB causes immediate fall of Systemic Vascular Resistance Index (SVRI) after OPCAB. Conclusion: Better cardiovascular functioning immediately after OPCAB than ONCAB may be important for better hemodynamic stability. The difference is however eliminated after 24 hours indicating little significance in long term outcome.展开更多
Background: The skin serves as the first line of defense for the human body. Direct sunlight contains damaging radiations that can speed up the ageing process of the skin, resulting in wrinkles, leathery skin, dark pa...Background: The skin serves as the first line of defense for the human body. Direct sunlight contains damaging radiations that can speed up the ageing process of the skin, resulting in wrinkles, leathery skin, dark patches, and solar elastosis. Objectives: To evaluate the effect of multiple solar irradiation related factors at the protein level in human dermal fibroblast (HDF). The overall effect of individual solar irradiations such as Infrared A (IRA), blue light (BL), UVA, and UVB on HDF cells and the extent of molecular level aberrations to be assessed and compared against each. Methods: Label-free quantitative proteomics (MS/MS) approach has been adopted in this study to observe the protein level changes induced in the HDF cells through various exposures of full light sources. Following that, downstream insilico analysis has been carried out. Results: In this study, it is demonstrated all the four different solar irradiations significantly contribute to the molecular degeneration of skin cells through various mechanisms. This study confirms that BL down-regulates DNA repair proteins and the skin cells-HDF stimulate the histone proteins as a response mechanism to maintain the chromosomal integrity. Conclusions: The proteomics experiment carried out in the current study intends to support the future sun care products based on full light protection technology that can be custom designed to provide complete protection from the solar radiation. Similar technology could enhance the further investigations for deeper understanding of induction, mode of action, and prevention of skin damage from extensive solar irradiation.展开更多
Dimensions and mutual relationships amongst fracture(cleat)parameters such as maximum aperture width,average aperture width,length,spacing etc.control the connectivity within a fracture network and the fluid flow in a...Dimensions and mutual relationships amongst fracture(cleat)parameters such as maximum aperture width,average aperture width,length,spacing etc.control the connectivity within a fracture network and the fluid flow in a coal seam as the matrix permeability,here,is negligible.In this paper,we document cleat size distributions and investigate length–aperture relationships from coals of Raniganj coalfield in Eastern India.This coalfield has a proven extractable reserve of six billion tons of coal and holds immense potential to be one of the largest coal bed methane fields serving India’s growing energy needs.Here,cleat length(L)correlates with corresponding maximum aperture width(Dmax)in a power-law function with an exponent of 0.84(DmaxαL0.84)instead of the commonly observed exponents of 1 or 0.5 applicable for other natural‘opening-mode’fractures.The conventional wisdom pertains that laminar fluid flow(Q)through an isolated,smooth-walled,parallel-plate fracture,embedded in an impermeable matrix,is directly proportional to the cube of its aperture width(b,equivalent to Davg;cubic law:Qαb3).This assumes a linear relationship between length and fracture aperture.However,the modified relationship between cleat length and average aperture width changes the cubic law applicable for Raniganj coal seam and now fluid flow correlates with aperture width in a power-law function with an exponent of 4.25(Qαb4.25)instead of 3(cube).Such simplifications will come handy for the modeling and estimation of fluid flow as it will reduce the effort of cleat length measurement which is anyway difficult and can be misleading due to the risk of undersampling.展开更多
This is a continuity of a series of taxonomic and phylogenetic papers on the fungi where materials were collected from many countries,examined and described.In addition to extensive morphological descriptions and appr...This is a continuity of a series of taxonomic and phylogenetic papers on the fungi where materials were collected from many countries,examined and described.In addition to extensive morphological descriptions and appropriate asexual and sexual connections,DNA sequence data are also analysed from concatenated datasets to infer phylogenetic relationships and substantiate systematic positions of taxa within appropriate ranks.Wherever new species or combinations are proposed,we apply an integrative approach using morphological and molecular data as well as ecological features wherever applicable.Notes on 112 fungal taxa are compiled in this paper including Biatriosporaceae and Roussoellaceae,Didysimulans gen.nov.,81 new species,18 new host records and new country records,five reference specimens,two new combinations,and three sexual and asexual morph reports.The new species are Amanita cornelii,A.emodotrygon,Angustimassarina alni,A.arezzoensis,A.italica,A.lonicerae,A.premilcurensis,Ascochyta italica,A.rosae,Austroboletus appendiculatus,Barriopsis thailandica,Berkleasmium ariense,Calophoma petasitis,Camarosporium laburnicola,C.moricola,C.grisea,C.ossea,C.paraincrustata,Colletotrichum sambucicola,Coprinopsis cerkezii,Cytospora gelida,Dacrymyces chiangraiensis,Didysimulans italica,D.mezzanensis,Entodesmium italica,Entoloma magnum,Evlachovaea indica,Exophiala italica,Favolus gracilisporus,Femsjonia monospora,Fomitopsis flabellata,F.roseoalba,Gongronella brasiliensis,Helvella crispoides,Hermatomyces chiangmaiensis,H.chromolaenae,Hysterium centramurum,Inflatispora caryotae,Inocybe brunneosquamulosa,I.luteobrunnea,I.rubrobrunnea,Keissleriella cirsii,Lepiota cylindrocystidia,L.flavocarpa,L.maerimensis,Lophiotrema guttulata,Marasmius luculentus,Morenoina calamicola,Moelleriella thanathonensis,Mucor stercorarius,Myrmecridium fluviae,Myrothecium septentrionale,Neosetophoma garethjonesii,Nigrograna cangshanensis,Nodulosphaeria guttulatum,N.multiseptata,N.sambuci,Panus subfasciatus,Paraleptosphaeria padi,Paraphaeosphaeri展开更多
文摘Natural killer T （NKT） cells are innate-like lymphocytes that generally recognize lipid antigens and are enriched in microvascular compartments of the liver. NKT cells can be activated by self- or microbial-lipid antigens and by signaling through toll-like receptors. Following activation, NKT cells rapidly secrete pro-inflammatory or anti- inflammatory cytokines and chemokines, and thereby determine the milieu for subsequent immunity or tolerance. It is becoming clear that two different subsets of NKT cells-type I and type II--have different modes of antigen recognition and have opposing roles in inflammatory liver diseases. Here we focus mainly on the roles of both NKT cell subsets in the maintenance of immune tolerance and inflammatory diseases in liver. Furthermore, how the differential activation of type I and type II NKT cells influences other innate cells and adaptive immune cells to result in important consequences for tissue integrity is discussed. It is crucial that better reagents, including CDld tetramers, be used in clinical studies to define the roles of NKT cells in liver diseases in patients.
基金funding by Bhabha Atomic Research Centre (BARC),Mumbai
文摘The performance of a well-designed layer of sand, and composites like layer of sand mixed with shredded rubber tire (RSM) as low cost base isolators, is studied in shake table tests in the laboratory. The building foundation is modeled by a 200 mm by 200 mm and 40 mm thick rigid plexi-glass block. The block is placed in the middle of a 1m by 1m tank filled with sand. The selected base isolator is placed between the block and the sand foundation. Accelerometers are placed on top of the footing and foundation sand layer. The displacement of the footing is also measured by LVDT. The whole setup is mounted on a shake table and subjected to sinusoidal motions with varying amplitude and frequency. Sand is found to be effective only at very high amplitude (> 0.65 g) of motions. The performance of a composite consisting of sand and 50% shredded rubber tire placed under the footing is found to be most promising as a low-cost effective base isolator.
基金supported by the National Institute of Arthritis and Musculoskeletal and Skin Diseases of the National Institutes of Health under Award Number R01 AR067306-01 and R01 AR078241(PI—Bandyopadhyay)。
文摘Porous and functionally graded materials have seen extensive applications in modern biomedical devices—allowing for improved site-specific performance;their appreciable mechanical,corrosive,and biocompatible properties are highly sought after for lightweight and high-strength load-bearing orthopedic and dental implants.Examples of such porous materials are metals,ceramics,and polymers.Although,easy to manufacture and lightweight,porous polymers do not inherently exhibit the required mechanical strength for hard tissue repair or replacement.Alternatively,porous ceramics are brittle and do not possess the required fatigue resistance.On the other hand,porous biocompatible metals have shown tailorable strength,fatigue resistance,and toughness.Thereby,a significant interest in investigating the manufacturing challenges of porous metals has taken place in recent years.Past research has shown that once the advantages of porous metallic structures in the orthopedic implant industry have been realized,their biological and biomechanical compatibility—with the host bone—has been followed up with extensive methodical research.Various manufacturing methods for porous or functionally graded metals are discussed and compared in this review,specifically,how the manufacturing process influences microstructure,graded composition,porosity,biocompatibility,and mechanical properties.Most of the studies discussed in this review are related to porous structures for bone implant applications;however,the understanding of these investigations may also be extended to other devices beyond the biomedical field.
基金the Director of Indian Veterinary Research Institute(Deemed University),Bareilly, Izatnagar,UP for providing financial support to conduct the research work
文摘Gastrointestinal（GI） parasitism is the most serious constraint throughout the world in small ruminants which causes significant production loss in animals.GI parasites are major contributor to reduce productivity in terms of meat,milk and wool in animals.Control of GI parasite is done primarily by anthelmintic treatment where choice and schedule of treatment is done after identification and quantitation of individual parasite.Identification of GI parasites is done through microscopic method by identifying specific morphological characteristics of egg and larva（L<sub>3</sub>）.Since most of parasite eggs are having similar morphological characteristics, identification up to species level through microscopy is not possible in most of cases.To address this issue,molecular techniques are the viable alternative for identification of species as well as molecular level differences within a species（isolates） of parasites.Different DNA based molecular techniques viz.PCR,AFLP,RAPD,RFLP,PCR-SSCP,real time PCR,DNA microarray etc.have been used for identification and to assess the genetic diversity among parasite population.For identification of species,the characteristic sequence of genomic DNA of different species should differ to allow the delineation of species,but at the same time,no/minor variation within the species should exist.In contrast,for purpose of identifying population variants（strains/isolates）, a considerable degree of variation in the sequence should exist within a species.Various target regions,including nuclear ribosomal DNA（rDNA）,mitochondrial DNA（mtDNA） or repetitive DNA elements（microsatellite loci）,which show considerable variation in the number of repeats within individuals have been employed to achieve the identification of parasites species or strain.
文摘The quantification of phosphorus(P) in bulk soil and P distribution in different size fractions of water-stable aggregates(WSAs)are important for assessing potential P loss through runoff. We evaluated available and total P distribution within WSAs of a sitty clay to clay soil in a long-term fertility experiment of a rice-wheat cropping system in India. Surface soil samples were collected from seven plots amended with NPK fertilizers in combination with or without organic amendments, farmyard manure(FYM), green manure(GM), and paddy straw(PS). The plot with no NPK fertilizers or organic amendments was set as a control. The soil samples were separated by wet sieving into four soil aggregate size fractions: large macroaggregates(> 2.0 mm), small macroaggregates(0.25–2.0 mm), fine microaggregates(0.05–0.25 mm), and a silt + clay-sized fraction(< 0.05 mm). Structural indices were higher in the soil receiving organic amendments than in the soil receiving inorganic fertilizer alone. Organically amended soil had a higher proportion of stable macroaggregates than the control and the soil receiving inorganic fertilizer alone, which were rich in microaggregates. Total and available P contents within WSAs were inversely related to the aggregate size, irrespective of treatment. The distribution of available and total P in the soil aggregate size fraction was as follows: silt + clay-size fraction > small macroaggregates > fine microaggregates> large macroaggregates. Within a size class, aggregate-associated available and total P contents in the organically amended soil were in the following order: FYM > PS ≥ GM. The available P content of the microaggregates(< 0.25 mm) was 8-to 10-times higher than that of the macroaggregates(> 0.25 mm), and the total P content of the microaggregates was 4-to 5-times higher than that of the macroaggregates. Cultivation without organic amendments resulted in more microaggregates that could be checked by the application of organic amendments such as FYM and GM, which increased the proport
基金supported by the National Natural Science Foundation of China(51975112,52375412)Fundamental Research Funds for Central Universities(N2203011)。
文摘Additive manufacturing provides achievability for the fabrication of bimetallic and multi-material structures;however,the material compatibility and bondability directly affect the parts’formability and final quality.It is essential to understand the underlying printability of different material combinations based on an adapted process.Here,the printability disparities of two common and attractive material combinations(nickel-and iron-based alloys)are evaluated at the macro and micro levels via laser directed energy deposition(DED).The deposition processes were captured using in situ high-speed imaging,and the dissimilarities in melt pool features and track morphology were quantitatively investigated within specific process windows.Moreover,the microstructure diversity of the tracks and blocks processed with varied material pairs was comparatively elaborated and,complemented with the informative multi-physics modeling,the presented non-uniformity in mechanical properties(microhardness)among the heterogeneous material pairs was rationalized.The differences in melt flow induced by the unlike thermophysical properties of the material pairs and the resulting element intermixing and localized re-alloying during solidification dominate the presented dissimilarity in printability among the material combinations.This work provides an in-depth understanding of the phenomenological differences in the deposition of dissimilar materials and aims to guide more reliable DED forming of bimetallic parts.
基金support from diverse funding sources,including the National Key Program for S&T Research and Development of the Ministry of Science and Technology(MOST),Yifang Wang's Science Studio of the Ten Thousand Talents Project,the CAS Key Foreign Cooperation Grant,the National Natural Science Foundation of China(NSFC)Beijing Municipal Science&Technology Commission,the CAS Focused Science Grant,the IHEP Innovation Grant,the CAS Lead Special Training Programthe CAS Center for Excellence in Particle Physics,the CAS International Partnership Program,and the CAS/SAFEA International Partnership Program for Creative Research Teams.
文摘The Circular Electron Positron Collider(CEPC)is a large scientific project initiated and hosted by China,fostered through extensive collaboration with international partners.The complex comprises four accelerators:a 30 GeV Linac,a 1.1 GeV Damping Ring,a Booster capable of achieving energies up to 180 GeV,and a Collider operating at varying energy modes(Z,W,H,and tt).The Linac and Damping Ring are situated on the surface,while the subterranean Booster and Collider are housed in a 100 km circumference underground tunnel,strategically accommodating future expansion with provisions for a potential Super Proton Proton Collider(SPPC).The CEPC primarily serves as a Higgs factory.In its baseline design with synchrotron radiation(SR)power of 30 MW per beam,it can achieve a luminosity of 5×10^(34)cm^(-2)s^(-1)per interaction point(IP),resulting in an integrated luminosity of 13 ab^(-1)for two IPs over a decade,producing 2.6 million Higgs bosons.Increasing the SR power to 50 MW per beam expands the CEPC's capability to generate 4.3 million Higgs bosons,facilitating precise measurements of Higgs coupling at sub-percent levels,exceeding the precision expected from the HL-LHC by an order of magnitude.This Technical Design Report(TDR)follows the Preliminary Conceptual Design Report(Pre-CDR,2015)and the Conceptual Design Report(CDR,2018),comprehensively detailing the machine's layout,performance metrics,physical design and analysis,technical systems design,R&D and prototyping efforts,and associated civil engineering aspects.Additionally,it includes a cost estimate and a preliminary construction timeline,establishing a framework for forthcoming engineering design phase and site selection procedures.Construction is anticipated to begin around 2027-2028,pending government approval,with an estimated duration of 8 years.The commencement of experiments and data collection could potentially be initiated in the mid-2030s.
基金supported by the National Institute of Arthritis and Musculoskeletal and Skin Diseases of the National Institutes of Health under Award Numbers R01 AR067306 and R01 AR078241。
文摘Bacterial colonization of orthopedic implants is one of the leading causes of failure and clinical complexities for load-bearing metallic implants. Topical or systemic administration of antibiotics may not offer the most efficient defense against colonization, especially in the case of secondary infection, leading to surgical removal of implants and in some cases even limbs. In this study, laser powder bed fusion was implemented to fabricate Ti3Al2V alloy by a 1:1 weight mixture of CpTi and Ti6Al4V powders. Ti-Tantalum(Ta)–Copper(Cu) alloys were further analyzed by the addition of Ta and Cu into the Ti3Al2V custom alloy. The biological,mechanical, and tribo-biocorrosion properties of Ti3Al2V alloy were evaluated. A 10 wt.% Ta(10Ta) and 3 wt.% Cu(3Cu) were added to the Ti3Al2V alloy to enhance biocompatibility and impart inherent bacterial resistance. Additively manufactured implants were investigated for resistance against Pseudomonas aeruginosa and Staphylococcus aureus strains of bacteria for up to 48 h. A 3 wt.% Cu addition to Ti3Al2V displayed improved antibacterial efficacy, i.e.78%–86% with respect to CpTi. Mechanical properties for Ti3Al2V–10Ta–3Cu alloy were evaluated, demonstrating excellent fatigue resistance, exceptional shear strength, and improved tribological and tribo-biocorrosion characteristics when compared to Ti6Al4V. In vivo studies using a rat distal femur model revealed improved early-stage osseointegration for alloys with10 wt.% Ta addition compared to CpTi and Ti6Al4V. The 3 wt.% Cu-added compositions displayed biocompatibility and no adverse infammatory response in vivo. Our results establish the Ti3Al2V–10Ta–3Cu alloy’s synergistic effect on improving both in vivo biocompatibility and microbial resistance for the next generation of load-bearing metallic implants.
基金financial assistance received from the Department of Science and Technology (Government of India) for carrying out this investigation
文摘Lump lime as a fiux material in a basic oxygen furnace （BOF） often creates problems in operation due to its high melting point, poor dissolution property, hygroscopic nature, and fines generation tendency. To alleviate these problems, fluxed lime iron oxide pellets （FLIP） containing 30% CaO were developed in this study using waste iron oxide fines and lime. The suitable handling strengths of the pellet （crushing strength： 300 N; drop strength： 130 times） of FLIP were developed by treating with CO2 or industrial waste gas at room temperature, while no separate binders were used. When the pellet was added into hot metal bath （carbon-containing molten iron）, it was decomposed, melted, and transformed to produce low melting oxidizing slag, because it is a combination of main CaO and Fe2O3. This slag is suitable for facilitating P and C removal in refining. Furthermore, the pellet enhances waste utilization and use of CO2 in waste gas. In this article, emphasis is given on studying the behavior of these pellets in hot metal bath during melting and refining along with thermodynamics and kinetics analysis. The observed behaviors of the pellet in hot metal bath confirm that it is suitable and beneficial for use in BOF and replaces lump lime.
文摘Background and Objectives:The cases of apparent natural deaths are encountered in the hospital casualties who are noted dead at the time of the first medical attention and as such are labeled as“Brought Dead.”These include the cases of sudden death,unexplained death,and unattended death.The cause of such deaths is reported in the literature to emanate principally from the cardiovascular system,though there are some documented geographical,racial,and other variations.In the present study,we endeavored to detect the cause of such natural deaths in terms of the disease and the organ system involved,in the deceased individuals of the contemporary Bengali population,with cases due to obvious unnatural causes being excluded.Materials and Methods:An observational,cross-sectional study with 105(n=105,male:89,female:16)study subjects of age group of 20-80 years,selected by systemic random sampling,from the brought dead subjects coming to the mortuary of the NRS Medical College and Hospital for medicolegal autopsy from April 2011 to March 2012,excluding cases having a history of the obvious unnatural event.Organ system-wise gross examination was done,followed by tissue sampling for histopathological examination.The case-wise findings were tabulated and analyzed for descriptive statistics using SPSS software.Results:In the present study,89 cases were male(84.8%)and 16 cases were female(15.2%),which reflects a male:female ratio of 5.56:1.The dead bodies are mostly recovered from the footpaths(47 cases,44%).Sixty-four(61%)cases are of known identity.In 54 cases out of 105(51.4%),morbid pathology is detected in the respiratory system(RS),lobar pneumonia,and cavitary pulmonary tuberculosis being the most frequent disease entity,in both genders.Fifty-one years-sixty-five years is found to be the most commonly affected age group,in both genders.Interpretation and Conclusions:The present study shows that the most common organ system involved in brought dead cases is the RS,which is supported by a few Indian studies.
文摘AIM：To evaluate the protective activity of allylpyrocatechol （APC）, the major antioxidant constituent of Piper betel, against the indomethacin-induced stomach ulceration in the rat model and correlates with its antioxidative and mucin protecting properties.METHODS： Male Sprague-Dawley rats were divided into five groups. Normal control rats （group Ⅰ ） were given the vehicle oral dose of gum acacia in distilled water （1 mL per rat）; ulcerated control and treated rats （groups Ⅱ-V） were given a single dose of indomethacin （30 mg/kg body wt.）; group Ⅱ rats were sacrificed 4 h after indomethacin administration; groups Ⅲ-Ⅴ rats were given the vehicle （1 mL per rat） or APC （2 mg/kg body wt.） or misoprostol （1.43 μg/kg body wt.） once daily by oral intubation for 7 d starting from 4 h after the indomethacin administration. After 7 d, the stomach tissues were excised for histological examination and biochemical analysis. RESULTS： Treatment with APC （2 mg/kg body wt per day） and misoprostol （1.43 μg/kg body wt per day） for 7 d could effectively heal the stomach ulceration as revealed from the ulcer index and histopathological studies. Compared to the zero day ulcerated group, treatment with APC and misoprostol reduced the ulcer index by 93.4% and 85.4% respectively （P 〈 0.05）. Both APC and misoprostol accelerated ulcer healing observed in natural recovery （P 〈 0.05）, their respective healing capacities not being significantly different. The healing capacities of APC and misoprostol could be attributed to their antioxidant activity as well as the ability to enhance the rnucin content of the gastric tissues. Compared to the ulcerated untreated rats, those treated with APC and rnisoprostol showed near normal MDA levels, while the protein levels were 86% and 78% of the normal value respectively （P 〈 0.05）. Likewise, both APC and rnisoprostol increased the SOD, catalase, and rnucin levels significantly （P 〈 0.05）, the effect of APC being better. CON
基金supported by the U.S.Department of Energy through the Building America program under award number DE-EE0008694.
文摘Occupants are the core of the built environment.Traditional heating,ventilation,and air-conditioning(HVAC)systems operate with predefined schedules and maximum occupancy assumptions with no consideration of specific occupant information.These generalized assumptions usually do not align with the actual demand and result in over-conditioning and occupant discomfort.In recent years,with the aid of Information&Communication Technology(ICT)and Computer Science(CS),it is possible to acquire real-time and accurate occupant information to satisfy the exact thermal requirement through specific HVAC control in one particular built environment.This mechanism is called HVAC“Occupant-centric Control(OCC).”HVAC OCC strategy starts with collecting the occupant’s information(e.g.,presence/absence)and then applies it to meet the occupant’s requirement(e.g.,thermal comfort).However,even though some research studies and field pilot demonstrations have been devoted to the field of OCC,there is a lack of systematic knowledge about occupant data,which is the principal component of OCC for HVAC researchers and practitioners.To fill this gap,this review paper discusses OCC with a particular emphasis on occupant information and investigates how this information can assist HVAC operation in providing an acceptable built environment in required spaces during the required time.We provide a fine-grained,comprehensive picture of occupant information,discuss its features,the modalities of information feed-in into the HVAC control,and the application of commonly utilized occupant information for OCC.
基金Supported by Vivekananda Institute of Medical Sciences,Ramakrishna Mission Seva Pratishthan,Kolkata who provided a research grant
文摘AIM To evaluate the impact of pioglitazone pharmacotherapy in median nerve electrophysiology in the carpal tunnel among type 2 diabetes patients.METHODS The study was executed in patients with type 2 diabetes, treated with oral drugs, categorized under pioglitazone or non-pioglitazone group(14 in each group), and who received electrophysiological evaluation by nerve conduction velocity at baseline and 3 mo.RESULTS At 3 mo, pioglitazone-category had inferior amplitude in sensory median nerve [8.5 interquartile range(IQR) = 6.5 to 11.5) vs non-pioglitazone 14.5(IQR 10.5 to 18.75)](P = 0.002). Non-pioglitazone category displayed amelioration in amplitude in the sensory median nerve [baseline 13(IQR = 9 to 16.25) vs 3 mo 8.5(IQR = 6.5 to 11.5)](P = 0.01) and amplitude in motor median nerve [baseline 9(IQR = 4.75 to 11) vs 3 mo 6.75(IQR = 4.75 to 10.25)](P = 0.049); and deterioration of terminal latency of in motor ulnar nerve [baseline 2.07(IQR = 1.92 to 2.25) vs 3 mo 2.16(IQR = 1.97 to 2.325)](P = 0.043). There was amelioration of terminal latency in sensory ulnar nerve [baseline 2.45(IQR = 2.315 to 2.88) vs 3 mo 2.37(IQR = 2.275 to 2.445) for pioglitazone group(P = 0.038).CONCLUSION Treatment with pioglitazone accentuates probability of compressive neuropathy. In spite of comparable glycemic control over 3 mo, patients treated with pioglitazone showed superior electrophysiological parameters for the ulnar nerve. Pioglitazone has favourable outcome in nerve electrophysiology which was repealed when the nerve was subjected to compressive neuropathy.
基金supported by the Learning & Academic Research Institution for Master’s and Ph.D. Students and Postdocs (LAMP) Program of the National Research Foundation of Korea (NRF) grant funded by the Ministry of Education (No. RS-2023-00285353)supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIP) (NRF-2021R1A2C3006662, NRF-2022R1A5A1030054, and 2021R1A2C1091301)+3 种基金the support from Natural Sciences and Engineering Research Council of Canada (NSERC)Canada Foundation for Innovation (CFI)Atlantic Canada Opportunities Agency (ACOA)the New Brunswick Innovation Foundation (NBIF)
文摘The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.
文摘Purpose: Myocardial revascularization by coronary artery bypass grafting (CABG) in ischemic heart disease patients has direct impact on hemodynamic parameters in the immediate post-operative period. The peri-operative cardiovascular functioning is an important determinant for outcome of surgery. In On-Pump CABG (ONCAB), the cardiopulmonary bypass has a negative effect on myocardium. Off-Pump CABG (OPCAB) avoids the effect of CPB but complete revascularization with difficult positioning of heart is technically demanding. This study is aimed to compare the cardiovascular functioning in the immediate post-operative period after OPCAB and ONCAB. Methods: Total 106 patients were operated for CABG from January 2015 to June 2016, of which 75 patients were operated for OPCAB and 31 patients were operated for ONCAB. For the comparison, hemodynamic parameters were measured during anesthesia before surgery, postoperatively after 1 and 4 hours (h) in the ICU, and in the morning after surgery, approximately after 20 h. Results: The time-dependent rise of hemodynamic parameters like Cardiac Output (CO), Cardiac Index (CI), Stroke volume (SV) and Left Ventricular Stroke Work Index (LVSWI) in the immediate post-operative hours (1 h and 4 h) are more predominant in OPCAB group than ONCAB group although the difference is eliminated mostly at 20 h. The better peripheral vasodilation after OPCAB causes immediate fall of Systemic Vascular Resistance Index (SVRI) after OPCAB. Conclusion: Better cardiovascular functioning immediately after OPCAB than ONCAB may be important for better hemodynamic stability. The difference is however eliminated after 24 hours indicating little significance in long term outcome.
文摘Background: The skin serves as the first line of defense for the human body. Direct sunlight contains damaging radiations that can speed up the ageing process of the skin, resulting in wrinkles, leathery skin, dark patches, and solar elastosis. Objectives: To evaluate the effect of multiple solar irradiation related factors at the protein level in human dermal fibroblast (HDF). The overall effect of individual solar irradiations such as Infrared A (IRA), blue light (BL), UVA, and UVB on HDF cells and the extent of molecular level aberrations to be assessed and compared against each. Methods: Label-free quantitative proteomics (MS/MS) approach has been adopted in this study to observe the protein level changes induced in the HDF cells through various exposures of full light sources. Following that, downstream insilico analysis has been carried out. Results: In this study, it is demonstrated all the four different solar irradiations significantly contribute to the molecular degeneration of skin cells through various mechanisms. This study confirms that BL down-regulates DNA repair proteins and the skin cells-HDF stimulate the histone proteins as a response mechanism to maintain the chromosomal integrity. Conclusions: The proteomics experiment carried out in the current study intends to support the future sun care products based on full light protection technology that can be custom designed to provide complete protection from the solar radiation. Similar technology could enhance the further investigations for deeper understanding of induction, mode of action, and prevention of skin damage from extensive solar irradiation.
基金This is part of KB's doctoral research.This work is also a part of the pilot project for a project proposal(Project No:154)submitted to The Ministry of Earth Sciences(MoES)Government of India.The authors are grateful to the Indian Institute of Science Education and Research Bhopal(IISERB)for funding the necessary equipment and providing logistical support+3 种基金We thank Coal India Limited(CIL)for their support and access to coal mines of Raniganj and Barakar coal fieldsThe authors are also thankful to Prof.S.K.Tandon of the Department of Earth and Environmental Sciences,USER Bhopal(Grant No.INST/EES/2016037)three anonymous referees and the Editor for their valuable comments that helped immensely to improve the manuscriptThe authors have no conflict of interest while publishing this study.
文摘Dimensions and mutual relationships amongst fracture(cleat)parameters such as maximum aperture width,average aperture width,length,spacing etc.control the connectivity within a fracture network and the fluid flow in a coal seam as the matrix permeability,here,is negligible.In this paper,we document cleat size distributions and investigate length–aperture relationships from coals of Raniganj coalfield in Eastern India.This coalfield has a proven extractable reserve of six billion tons of coal and holds immense potential to be one of the largest coal bed methane fields serving India’s growing energy needs.Here,cleat length(L)correlates with corresponding maximum aperture width(Dmax)in a power-law function with an exponent of 0.84(DmaxαL0.84)instead of the commonly observed exponents of 1 or 0.5 applicable for other natural‘opening-mode’fractures.The conventional wisdom pertains that laminar fluid flow(Q)through an isolated,smooth-walled,parallel-plate fracture,embedded in an impermeable matrix,is directly proportional to the cube of its aperture width(b,equivalent to Davg;cubic law:Qαb3).This assumes a linear relationship between length and fracture aperture.However,the modified relationship between cleat length and average aperture width changes the cubic law applicable for Raniganj coal seam and now fluid flow correlates with aperture width in a power-law function with an exponent of 4.25(Qαb4.25)instead of 3(cube).Such simplifications will come handy for the modeling and estimation of fluid flow as it will reduce the effort of cleat length measurement which is anyway difficult and can be misleading due to the risk of undersampling.
基金Saowaluck Tibpromma would like to thank the Molecular Biology Experimental Center at Kunming Institute of Botany for facilities for molecular work,the Mushroom Research Foundation(MRF)Chiang Rai,Thailand for the financial support of her study and Shaun Pennycook is thanked for nomenclatural advice.K.D.Hyde would like to thank the Thailand Research Fund Grant No.RSA5980068 entitled“Biodiversity,phylogeny and role of fungal endophytes on above parts of Rhizophora apiculata and Nypa fruticans”+6 种基金the Chinese Academy of Sciences,Project Number 2013T2S0030for the award of Visiting Professorship for Senior International Scientists at Kunming Institute of Botany and National Research Council of Thailand(Mae Fah Luang University)for a grants“Biodiversity,phylogeny and role of fungal endophytes of Pandanaceae”(Grant No.:592010200112)“Diseases of mangrove trees and maintenance of good forestry practice”(Grant No.:60201000201)for supporting this study.S.C.Karunarathna,P.E.Mortimer and J.C.Xu would like to thank the World Agroforestry Centre,East and Central Asia OfficeKey Laboratory for Plant Diversity and Biogeography of East Asia,Kunming Institute of Botany,Chinese Academy of Sciencethe ChineseMinistry of Science and Technology,under the 12th 5-year National Key Technology Support Program(NKTSP)2013 BAB07B06 integration and comprehensive demonstration of key technologies on Green Phosphate-mountaion Construction and the CGIAR Research Program 6:Forest,Trees and Agroforestry for partial funding.The authors would like to extend their sincere appreciation to the Deanship of Scientific Research at King Saud University for funding this research group NO(RG-1436-025)Financial support by the German Academic Exchange Service(DAAD)and the Thai Royal Golden Ph.D.Jubilee-Industry program(RGJ)for a joint TRFDAAD PPP(2012-2014)academic exchange grant to K.D.Hyde and M.Stadler,and the RGJ for a personal grant to B.Thongbai(No.Ph.D/0138/2553 in 4.S.MF/53/A.3)is gratefully acknowledged.Chayanard Phukhamsakda(PHD/0020/25
文摘This is a continuity of a series of taxonomic and phylogenetic papers on the fungi where materials were collected from many countries,examined and described.In addition to extensive morphological descriptions and appropriate asexual and sexual connections,DNA sequence data are also analysed from concatenated datasets to infer phylogenetic relationships and substantiate systematic positions of taxa within appropriate ranks.Wherever new species or combinations are proposed,we apply an integrative approach using morphological and molecular data as well as ecological features wherever applicable.Notes on 112 fungal taxa are compiled in this paper including Biatriosporaceae and Roussoellaceae,Didysimulans gen.nov.,81 new species,18 new host records and new country records,five reference specimens,two new combinations,and three sexual and asexual morph reports.The new species are Amanita cornelii,A.emodotrygon,Angustimassarina alni,A.arezzoensis,A.italica,A.lonicerae,A.premilcurensis,Ascochyta italica,A.rosae,Austroboletus appendiculatus,Barriopsis thailandica,Berkleasmium ariense,Calophoma petasitis,Camarosporium laburnicola,C.moricola,C.grisea,C.ossea,C.paraincrustata,Colletotrichum sambucicola,Coprinopsis cerkezii,Cytospora gelida,Dacrymyces chiangraiensis,Didysimulans italica,D.mezzanensis,Entodesmium italica,Entoloma magnum,Evlachovaea indica,Exophiala italica,Favolus gracilisporus,Femsjonia monospora,Fomitopsis flabellata,F.roseoalba,Gongronella brasiliensis,Helvella crispoides,Hermatomyces chiangmaiensis,H.chromolaenae,Hysterium centramurum,Inflatispora caryotae,Inocybe brunneosquamulosa,I.luteobrunnea,I.rubrobrunnea,Keissleriella cirsii,Lepiota cylindrocystidia,L.flavocarpa,L.maerimensis,Lophiotrema guttulata,Marasmius luculentus,Morenoina calamicola,Moelleriella thanathonensis,Mucor stercorarius,Myrmecridium fluviae,Myrothecium septentrionale,Neosetophoma garethjonesii,Nigrograna cangshanensis,Nodulosphaeria guttulatum,N.multiseptata,N.sambuci,Panus subfasciatus,Paraleptosphaeria padi,Paraphaeosphaeri
