The mining process involves drilling and excavation, resulting in the production of waste rock and tailings. The waste materials are then removed and stored in designated areas. This study aims to evaluate the mechani...The mining process involves drilling and excavation, resulting in the production of waste rock and tailings. The waste materials are then removed and stored in designated areas. This study aims to evaluate the mechanical strength and the environmental and economic impact of using Coltan Mining Waste (CMW) as a substitute for aggregates in concrete and mortar production. To achieve this, the CMW needs to be characterised. The Dreux Gorisse method was primarily used to produce concrete with a strength of 20 MPa at 28 days. The mortars, on the other hand, were formulated according to the NF P 18-452 standard. The environmental impact of using CMW as substitutes for natural aggregates in the production of concrete and mortar was analysed using SimaPro software. The results showed that mortars and concrete made with CMW have comparable compressive strengths to the reference mortar and concrete;reduce the negative impact on ecosystem quality, human health, resources, and climate change. It has also been shown that the substitution of aggregates by CMW reduces the cost of concrete and mortar as a function of the distance from the aggregate footprint.展开更多
The following study is aimed at valorizing an important part of waste from building demolition, particularly concrete as a source of aggregates for their usage in n<span style="font-family:Verdana;">ew...The following study is aimed at valorizing an important part of waste from building demolition, particularly concrete as a source of aggregates for their usage in n<span style="font-family:Verdana;">ew hydraulic concrete formulation. The experimental study mainly consisted of physical characterization of natural and recycled aggregates respectively and the impact of the latter on some properties of the new formulated concrete, actually their respective consistencies for fresh concrete and mechanical strength for the hardened one. The outcome of the study shows that the recycled aggregates are m</span><span style="font-family:Verdana;">ore heterogeneous and have a high capacity of water absorption, but which still respects the current standards of concrete.</span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">The need for additional water has been observed for recycled aggregates-based concrete so as to have the same workability. About the compressive strength, mechanical properties obviously show that, at 28 days from setting up, concretes from recycled aggregates can reach compressive strengths range between 20 and 25 MPa</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">without any sophisticated technology. So, these results show that we can efficiently contribute to the protection of environment by valorizing waste from concrete-based building demolition on the one hand;and the preservation of natural reserve on the other. And both advantages contribute to sustainable development overall goals.</span></span></span>展开更多
The use of materials from waste in buildings compensates for the lack of natural resources, solves the problem of waste management and provides an altern<span style="font-family:Verdana;">ative techniq...The use of materials from waste in buildings compensates for the lack of natural resources, solves the problem of waste management and provides an altern<span style="font-family:Verdana;">ative technique for protection of the environment. There are a lar</span><span style="font-family:Verdana;">ge number of industrial wastes that are used for full or partial replacement of raw materials in some construction materials. This review assesses mining waste in concrete as a substitute for aggregates and cement;in fired bricks as a substitute for soil;and in road backfill as a substitute for soil. This paper reviews some mining tailings, mine waste rocks and some slags obtained in the exploitation and/or processing of some ores including iron, gold, lead, phosphate, copper, coal, etc. Different physical properties, mechanical properties, chemical properties, heavy metal content, mineralogic composition, geotechnical properties and environmental properties (leaching test) of the mine wastes were examined. The physical, mechanical and environmental properties of the materials obtained by substitution of raw materials by mine waste were examined and compared to reference materials. Mining waste in cementitious materials offers good compressive strengths, while the porosity of the concrete and/or mortar is a factor influencing its toxicity. As for the waste in fired bricks, fired at a temperature of 900°</span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">C</span><span style="font-family:Verdana;"> or more, it offers convincing compressive and flexural strengths. The few research studies obtained on the use of mining waste in road embankments have shown that mining waste can be used as a sub-base layer and backfill as long as it is not toxic. In addition, several other mining wastes require special attention as substitutes for raw materials in construction materials, such as coltan, cobalt.</span></span></span></span>展开更多
文摘The mining process involves drilling and excavation, resulting in the production of waste rock and tailings. The waste materials are then removed and stored in designated areas. This study aims to evaluate the mechanical strength and the environmental and economic impact of using Coltan Mining Waste (CMW) as a substitute for aggregates in concrete and mortar production. To achieve this, the CMW needs to be characterised. The Dreux Gorisse method was primarily used to produce concrete with a strength of 20 MPa at 28 days. The mortars, on the other hand, were formulated according to the NF P 18-452 standard. The environmental impact of using CMW as substitutes for natural aggregates in the production of concrete and mortar was analysed using SimaPro software. The results showed that mortars and concrete made with CMW have comparable compressive strengths to the reference mortar and concrete;reduce the negative impact on ecosystem quality, human health, resources, and climate change. It has also been shown that the substitution of aggregates by CMW reduces the cost of concrete and mortar as a function of the distance from the aggregate footprint.
文摘The following study is aimed at valorizing an important part of waste from building demolition, particularly concrete as a source of aggregates for their usage in n<span style="font-family:Verdana;">ew hydraulic concrete formulation. The experimental study mainly consisted of physical characterization of natural and recycled aggregates respectively and the impact of the latter on some properties of the new formulated concrete, actually their respective consistencies for fresh concrete and mechanical strength for the hardened one. The outcome of the study shows that the recycled aggregates are m</span><span style="font-family:Verdana;">ore heterogeneous and have a high capacity of water absorption, but which still respects the current standards of concrete.</span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">The need for additional water has been observed for recycled aggregates-based concrete so as to have the same workability. About the compressive strength, mechanical properties obviously show that, at 28 days from setting up, concretes from recycled aggregates can reach compressive strengths range between 20 and 25 MPa</span></span></span><span><span><span style="font-family:""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">without any sophisticated technology. So, these results show that we can efficiently contribute to the protection of environment by valorizing waste from concrete-based building demolition on the one hand;and the preservation of natural reserve on the other. And both advantages contribute to sustainable development overall goals.</span></span></span>
文摘The use of materials from waste in buildings compensates for the lack of natural resources, solves the problem of waste management and provides an altern<span style="font-family:Verdana;">ative technique for protection of the environment. There are a lar</span><span style="font-family:Verdana;">ge number of industrial wastes that are used for full or partial replacement of raw materials in some construction materials. This review assesses mining waste in concrete as a substitute for aggregates and cement;in fired bricks as a substitute for soil;and in road backfill as a substitute for soil. This paper reviews some mining tailings, mine waste rocks and some slags obtained in the exploitation and/or processing of some ores including iron, gold, lead, phosphate, copper, coal, etc. Different physical properties, mechanical properties, chemical properties, heavy metal content, mineralogic composition, geotechnical properties and environmental properties (leaching test) of the mine wastes were examined. The physical, mechanical and environmental properties of the materials obtained by substitution of raw materials by mine waste were examined and compared to reference materials. Mining waste in cementitious materials offers good compressive strengths, while the porosity of the concrete and/or mortar is a factor influencing its toxicity. As for the waste in fired bricks, fired at a temperature of 900°</span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">C</span><span style="font-family:Verdana;"> or more, it offers convincing compressive and flexural strengths. The few research studies obtained on the use of mining waste in road embankments have shown that mining waste can be used as a sub-base layer and backfill as long as it is not toxic. In addition, several other mining wastes require special attention as substitutes for raw materials in construction materials, such as coltan, cobalt.</span></span></span></span>
