采用熔体水淬法(水冷法)、气雾化法和单辊熔融纺丝技术(甩带法)制备不同冷却速率的快速凝固过共晶Al-50%Si合金,并通过扫描电子显微镜(scanning electron microscope,SEM)和X射线衍射仪(X-ray diffractometer,XRD)分析了快速凝固与常规...采用熔体水淬法(水冷法)、气雾化法和单辊熔融纺丝技术(甩带法)制备不同冷却速率的快速凝固过共晶Al-50%Si合金,并通过扫描电子显微镜(scanning electron microscope,SEM)和X射线衍射仪(X-ray diffractometer,XRD)分析了快速凝固与常规凝固的差异,以及快速凝固Al-50%Si合金微观组织的演变。结果表明:在水冷的Al-50%Si合金组织中观察到了树枝状的Al相,较大的过冷度导致这种亚共晶组织的形成,此组织属于非稳定状态,且共晶Si完全细化至纤维状;随着冷却速率的增加,在甩带试样中Al相的树枝状组织消失;通过甩带以及气雾化制备的Al-50%Si合金中,初晶Si颗粒被明显细化,由常规凝固的200μm细化至20μm左右,使Si在Al基体中的固溶度增大,造成Al基体晶格发生畸变。展开更多
Cu−Fe alloys with different Fe contents were prepared by vacuum hot pressing.After hot rolling and aging treatment,the effects of Fe content on microstructure,mechanical properties and electrical conductivity of Cu−Fe...Cu−Fe alloys with different Fe contents were prepared by vacuum hot pressing.After hot rolling and aging treatment,the effects of Fe content on microstructure,mechanical properties and electrical conductivity of Cu−Fe alloys were studied.The results show that,when w(Fe)<60%,the dynamic recrystallization extent of both Cu phase and Fe phase increases.When w(Fe)≥60%,Cu phase is uniformly distributed into the Fe phase and the deformation of alloy is more uniform.With the increase of the Fe content,the tensile strength of Cu−5wt.%Fe alloy increases from 305 MPa to 736 MPa of Cu−70wt.%Fe alloy,the elongation decreases from 23%to 17%and the electrical conductivity decreases from 31%IACS to 19%IACS.These results provide a guidance for the composition and processing design of Cu−Fe alloys.展开更多
文摘采用熔体水淬法(水冷法)、气雾化法和单辊熔融纺丝技术(甩带法)制备不同冷却速率的快速凝固过共晶Al-50%Si合金,并通过扫描电子显微镜(scanning electron microscope,SEM)和X射线衍射仪(X-ray diffractometer,XRD)分析了快速凝固与常规凝固的差异,以及快速凝固Al-50%Si合金微观组织的演变。结果表明:在水冷的Al-50%Si合金组织中观察到了树枝状的Al相,较大的过冷度导致这种亚共晶组织的形成,此组织属于非稳定状态,且共晶Si完全细化至纤维状;随着冷却速率的增加,在甩带试样中Al相的树枝状组织消失;通过甩带以及气雾化制备的Al-50%Si合金中,初晶Si颗粒被明显细化,由常规凝固的200μm细化至20μm左右,使Si在Al基体中的固溶度增大,造成Al基体晶格发生畸变。
基金sponsored by the National Key Research and Development Program of China(No.2020YFB0311102)the Ningbo“Science and Technology Innovation 2025”Major Project,China(No.2019B10087)+1 种基金the Project of State Key Laboratory of Powder Metallurgy at Central South UniversityYoung People Fund of Jiangxi Province,China(No.2018BAB216005)。
文摘采用Gleeble-3500热模拟试验机对在变形温度500~650℃和应变速率0.001~1 s^(-1)条件下的60NiTi合金进行热压缩变形,分析其热变形行为和显微组织,建立变形本构模型,绘制热加工图。结果表明,当压缩温度升高或应变速率降低时,峰值应力减小。合金的热变形激活能为327.89 k J/mol,热加工工艺参数为变形温度600~650℃和应变速率0.005~0.05 s^(-1)。当变形温度升高时,合金的再结晶程度增大;当应变速率增大时,位错密度和孪晶数量增大,Ni3Ti相易于聚集;Ni3Ti析出相有利于诱发合金基体的动态再结晶。动态回复、动态再结晶和孪生是60NiTi合金热变形的主要机制。
基金financial supports from the National Natural Science Foundation of China (No.51974375)Key Project of "Technology Innovation 2025",Ningbo,China(No.2018B10030)+2 种基金Technology Research Program of Shenzhen,China (No.JSGG20170824162647398)Project of State Key Laboratory of Powder Metallurgy,Central South University,ChinaYoung People Fund of Jiangxi province,China (No.2018BAB216005.
文摘Cu−Fe alloys with different Fe contents were prepared by vacuum hot pressing.After hot rolling and aging treatment,the effects of Fe content on microstructure,mechanical properties and electrical conductivity of Cu−Fe alloys were studied.The results show that,when w(Fe)<60%,the dynamic recrystallization extent of both Cu phase and Fe phase increases.When w(Fe)≥60%,Cu phase is uniformly distributed into the Fe phase and the deformation of alloy is more uniform.With the increase of the Fe content,the tensile strength of Cu−5wt.%Fe alloy increases from 305 MPa to 736 MPa of Cu−70wt.%Fe alloy,the elongation decreases from 23%to 17%and the electrical conductivity decreases from 31%IACS to 19%IACS.These results provide a guidance for the composition and processing design of Cu−Fe alloys.
