A white organic light emitting device(WOLED) combining the blue organic light emitting device with a red color conversion layer(CCL) is reported,which includes a fluorescent material N-(4-((E)-2-(6-((E)-4-(diphenylami...A white organic light emitting device(WOLED) combining the blue organic light emitting device with a red color conversion layer(CCL) is reported,which includes a fluorescent material N-(4-((E)-2-(6-((E)-4-(diphenylamino) styryl)naphtha len-2-yl)vinyl) phenyl)-N-phenylbenzenamine(N-BDAVBi) doped into 4,4'-N,N'-dicarbazole-biphenyl(CBP) as the blue light emitting layer,and the poly(2-methoxy-5-(2'-ethylhexoxy)-1,4-phenylene vinylene(MEH-PPV) as a red CCL.By optimizing the concentration of MEH-PPV in the CCL,a good white light emission is obtained,which shows that the stable CIE coordinates of(0.33,0.34) will have a slight change when the driving voltage is increased from 6 to 11 V.The maximum brightness and current efficiency of the optimized device are 11294 cd/m2 and 6.4 cd/A,respectively.展开更多
The efficiency of organic light-emitting devices （OLEDs） based on N,N＇-bis（1-naphthyl）-N,N＇-diphenyl-N,1＇- biphenyl-4,4＇-diamine （NPB） （the hole transport layer） and tris（8-hydroxyquinoline） aluminum （A...The efficiency of organic light-emitting devices （OLEDs） based on N,N＇-bis（1-naphthyl）-N,N＇-diphenyl-N,1＇- biphenyl-4,4＇-diamine （NPB） （the hole transport layer） and tris（8-hydroxyquinoline） aluminum （Alq3） （both emission and electron transport layers） is improved remarkably by inserting a LiF interlayer into the hole transport layer. This thin LiF interlayer can effectively influence electrical performance and significantly improve the current efficiency of the device. A device with an optimum LiF layer thickness at the optimum position in NPB exhibits a maximum current efficiency of 5.96 cd/A at 215.79 mA/cm2, which is about 86% higher than that of an ordinary device （without a LiF interlayer, 3.2 cd/A）. An explanation can be put forward that LiF in the NPB layer can block holes and balance the recombination of holes and electrons. The results may provide some valuable references for improving OLED current efficiency.展开更多
We fabricate a kind of novel efficient blue fluorescent organic light emitting device（OLED） based on p-n heterojunctions composed of hole transporting layer（HTL） N,N ＇-bis（naphthalen-1-yl）-N,N ＇-bis（phenyl）-...We fabricate a kind of novel efficient blue fluorescent organic light emitting device（OLED） based on p-n heterojunctions composed of hole transporting layer（HTL） N,N ＇-bis（naphthalen-1-yl）-N,N ＇-bis（phenyl）-benzidine（NPB） and electron transporting layer（ETL） 4,7-diphnenyl-1,10-phenanthroline（BPhen）,into which a new blue material,DNCA（a derivation of N 6,N 6,N 12,N 12-tetrap-tolylchrysene-6,12-diamine）,is partially doped simultaneously,and double emitting layers are configured.With a turn-on voltage of 2.6 V at 1 cd/m 2,this type of OLED presents a maximum luminance efficiency（η max） of 8.83 cd/A at 5.818 mA/cm 2 and a maximum luminance of over 40000 cd/m 2.Meanwhile,the Commission Internationale De L＇Eclairage（CIE） coordinates of this device change slightly from（0.13,0.27） to（0.13,0.23） as the driving voltage increases from 3 V to 11 V.This improvement in the electroluminescent characteristics is attributed mainly to the ideal p-n heterojunction which can confine and distribute excitons evenly on two sides of the heterojunction interface so as to improve the carrier combination rate and expand the light-emitting region.展开更多
We demonstrate that the electroluminescent performances of organic light-emitting diodes （OLEDs） are significantly improved by evaporating a thin F4-TCNQ film as an anode buffer layer on the ITO anode. The optimum A...We demonstrate that the electroluminescent performances of organic light-emitting diodes （OLEDs） are significantly improved by evaporating a thin F4-TCNQ film as an anode buffer layer on the ITO anode. The optimum Alq3-based OLEDs with F4-TCNQ buffer layer exhibit a lower turn-on voltage of 2.6 V, a higher brightness of 39820cd/m^2 at 13 V, and a higher current efficiency of 5.96cd/A at 6 V, which are obviously superior to those of the conventional device （turn-on voltage of 4.1 V, brightness of 18230cd/m^2 at 13 V, and maximum current efficiency of 2.74calla at 10 V）. Furthermore, the buffered devices with F4-TCNQ as the buffer layer could not only increase the efficiency but also simplify the fabrication process compared with the p-doped devices in which F4-TCNQ is doped into β-NPB as p-HTL （3.11 cd/A at 7 V）. The reason why the current efficiency of the p-doped devices is lower than that of the buffered devices is analyzed based on the concept of doping, the measurement of absorption and photoluminescence spectra of the organic materials, and the current density-voltage characteristics of the corresponding hole-only devices.展开更多
基金supported by the National Natural Science Foundation of China(60906022,60676051)Natural Science Foundation of Tianjin, China(10JCYBJC01100)+1 种基金Scientific Developing Foundation of Tianjin Education Commission,China(2011ZD02)Jiangsu Natural Science Development Foundation for University,China(09KJB140006)~~
基金supported by the National Natural Science Foundation of China (No. 60906022)the Scientific Developing Foundation of Tianjin Education Commission (No. 20070805)
文摘A white organic light emitting device(WOLED) combining the blue organic light emitting device with a red color conversion layer(CCL) is reported,which includes a fluorescent material N-(4-((E)-2-(6-((E)-4-(diphenylamino) styryl)naphtha len-2-yl)vinyl) phenyl)-N-phenylbenzenamine(N-BDAVBi) doped into 4,4'-N,N'-dicarbazole-biphenyl(CBP) as the blue light emitting layer,and the poly(2-methoxy-5-(2'-ethylhexoxy)-1,4-phenylene vinylene(MEH-PPV) as a red CCL.By optimizing the concentration of MEH-PPV in the CCL,a good white light emission is obtained,which shows that the stable CIE coordinates of(0.33,0.34) will have a slight change when the driving voltage is increased from 6 to 11 V.The maximum brightness and current efficiency of the optimized device are 11294 cd/m2 and 6.4 cd/A,respectively.
基金supported by the National Natural Science Foundation of China (Grant Nos. 60906022 and 60876046)the Tianjin Natural Science Foundation of China (Grant No. 10JCYBJC01100)
文摘The efficiency of organic light-emitting devices （OLEDs） based on N,N＇-bis（1-naphthyl）-N,N＇-diphenyl-N,1＇- biphenyl-4,4＇-diamine （NPB） （the hole transport layer） and tris（8-hydroxyquinoline） aluminum （Alq3） （both emission and electron transport layers） is improved remarkably by inserting a LiF interlayer into the hole transport layer. This thin LiF interlayer can effectively influence electrical performance and significantly improve the current efficiency of the device. A device with an optimum LiF layer thickness at the optimum position in NPB exhibits a maximum current efficiency of 5.96 cd/A at 215.79 mA/cm2, which is about 86% higher than that of an ordinary device （without a LiF interlayer, 3.2 cd/A）. An explanation can be put forward that LiF in the NPB layer can block holes and balance the recombination of holes and electrons. The results may provide some valuable references for improving OLED current efficiency.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60906022 and 60876046)the Tianjin Natural Science Foundation,China (Grant No. 10JCYBJC01100)
文摘We fabricate a kind of novel efficient blue fluorescent organic light emitting device（OLED） based on p-n heterojunctions composed of hole transporting layer（HTL） N,N ＇-bis（naphthalen-1-yl）-N,N ＇-bis（phenyl）-benzidine（NPB） and electron transporting layer（ETL） 4,7-diphnenyl-1,10-phenanthroline（BPhen）,into which a new blue material,DNCA（a derivation of N 6,N 6,N 12,N 12-tetrap-tolylchrysene-6,12-diamine）,is partially doped simultaneously,and double emitting layers are configured.With a turn-on voltage of 2.6 V at 1 cd/m 2,this type of OLED presents a maximum luminance efficiency（η max） of 8.83 cd/A at 5.818 mA/cm 2 and a maximum luminance of over 40000 cd/m 2.Meanwhile,the Commission Internationale De L＇Eclairage（CIE） coordinates of this device change slightly from（0.13,0.27） to（0.13,0.23） as the driving voltage increases from 3 V to 11 V.This improvement in the electroluminescent characteristics is attributed mainly to the ideal p-n heterojunction which can confine and distribute excitons evenly on two sides of the heterojunction interface so as to improve the carrier combination rate and expand the light-emitting region.
基金Supported by the National Natural Science Foundation of China under Grant No 60906022, the Tianjin Natural Science Foundation under Grant No 10JCYBJC01100, and the Scientific Developing Foundation of Tianjin Education Commission under Grant No 20070805.
文摘We demonstrate that the electroluminescent performances of organic light-emitting diodes （OLEDs） are significantly improved by evaporating a thin F4-TCNQ film as an anode buffer layer on the ITO anode. The optimum Alq3-based OLEDs with F4-TCNQ buffer layer exhibit a lower turn-on voltage of 2.6 V, a higher brightness of 39820cd/m^2 at 13 V, and a higher current efficiency of 5.96cd/A at 6 V, which are obviously superior to those of the conventional device （turn-on voltage of 4.1 V, brightness of 18230cd/m^2 at 13 V, and maximum current efficiency of 2.74calla at 10 V）. Furthermore, the buffered devices with F4-TCNQ as the buffer layer could not only increase the efficiency but also simplify the fabrication process compared with the p-doped devices in which F4-TCNQ is doped into β-NPB as p-HTL （3.11 cd/A at 7 V）. The reason why the current efficiency of the p-doped devices is lower than that of the buffered devices is analyzed based on the concept of doping, the measurement of absorption and photoluminescence spectra of the organic materials, and the current density-voltage characteristics of the corresponding hole-only devices.
