Beam dynamics and rf designs of a 104 MHz ladder type IH-RFQ （L-IH-RFQ） accelerator are finished at Peking University for the acceleration of 14C＋ from 40 keV to 500 keV. As a specific feature, the output beam ener...Beam dynamics and rf designs of a 104 MHz ladder type IH-RFQ （L-IH-RFQ） accelerator are finished at Peking University for the acceleration of 14C＋ from 40 keV to 500 keV. As a specific feature, the output beam energy spread is as low as 0.6% achieved with the internal discrete bunching method, which makes potential applications of RFQ feasible, such as accelerator mass spectrometry and ion implantation. Tolerances of the beam dynamics design are studied by means of changing the input beam parameters, and the results are quite satisfying. On the other hand, the L-IH-RFQ structure is employed, taking advantage of its mechanical stability and the absence of inter-electrode voltage asymmetry. Radio-frequency properties are studied and optimized for reducing power loss with Microwave Studio （MWS）. Tuning of the field flatness and frequency is investigated in principle.展开更多
A 104-MHz ladder interdigital-H radio frequency quadrupole accelerator(T-IH-RFQ)is developed for applying RFQs to heavy ion implantation and accelerator-based mass spectroscopy in recent years at the Institute of Heav...A 104-MHz ladder interdigital-H radio frequency quadrupole accelerator(T-IH-RFQ)is developed for applying RFQs to heavy ion implantation and accelerator-based mass spectroscopy in recent years at the Institute of Heavy Ion Physics,Peking University.It could accelerate ions with a mass-to-charge ratio of less than 14,from 2.9 keV/u to 35.7 keV/u within a length of 1.1 m.The T-IH-RFQ cavity operating at H21(0)mode was constructed successfully.Based on a well designed rf power feeding system,the cavity was cold measured and tested with high rf power.In the case of cold measurement,the rf properties were obtained using a vector network analyzer with the help of a perturbation capacitor.During a high power test,the inter−electrode voltage was derived from the energy spectrum of x-rays measured by a high purity Ge detector.The results show that the specific shunt impedance of the T-IH-RFQ cavity reaches 178 kΩm,which could meet the requirements of beam dynamics design.展开更多
Beam dynamics and RF design have been performed of a new type trapezoidal IH-RFQ operating at 104 MHz for acceleration of 14C+ in the framework of RFQ based 14C AMS facility at Peking University. Low energy spread RFQ...Beam dynamics and RF design have been performed of a new type trapezoidal IH-RFQ operating at 104 MHz for acceleration of 14C+ in the framework of RFQ based 14C AMS facility at Peking University. Low energy spread RFQ beam dynamics design was approached by the method of internal discrete bunching. 14C+ will be accelerated from 40 keV to 500 keV with the length of about 1.1 m. The designed transmission efficiency is better than 95% and the energy spread is as low as 0.6%. Combining the beam dynamics design, a trapezoidal IH-RFQ structure was proposed, which can be cooled more easily and has better mechanical performance than traditional RFQ. Electromagnetic field distribution was simulated by using CST Microwave Studio (MWS). The specific shunt impedance and the quality factor were optimized primarily.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 10775009.
文摘Beam dynamics and rf designs of a 104 MHz ladder type IH-RFQ （L-IH-RFQ） accelerator are finished at Peking University for the acceleration of 14C＋ from 40 keV to 500 keV. As a specific feature, the output beam energy spread is as low as 0.6% achieved with the internal discrete bunching method, which makes potential applications of RFQ feasible, such as accelerator mass spectrometry and ion implantation. Tolerances of the beam dynamics design are studied by means of changing the input beam parameters, and the results are quite satisfying. On the other hand, the L-IH-RFQ structure is employed, taking advantage of its mechanical stability and the absence of inter-electrode voltage asymmetry. Radio-frequency properties are studied and optimized for reducing power loss with Microwave Studio （MWS）. Tuning of the field flatness and frequency is investigated in principle.
基金by the National Natural Science Foundation of China under Grant Nos 10775009 and 11079001.Y.C.Nie would like to thank the China Scholarship Council(CSC)for financial support when he was in Frankfurt.
文摘A 104-MHz ladder interdigital-H radio frequency quadrupole accelerator(T-IH-RFQ)is developed for applying RFQs to heavy ion implantation and accelerator-based mass spectroscopy in recent years at the Institute of Heavy Ion Physics,Peking University.It could accelerate ions with a mass-to-charge ratio of less than 14,from 2.9 keV/u to 35.7 keV/u within a length of 1.1 m.The T-IH-RFQ cavity operating at H21(0)mode was constructed successfully.Based on a well designed rf power feeding system,the cavity was cold measured and tested with high rf power.In the case of cold measurement,the rf properties were obtained using a vector network analyzer with the help of a perturbation capacitor.During a high power test,the inter−electrode voltage was derived from the energy spectrum of x-rays measured by a high purity Ge detector.The results show that the specific shunt impedance of the T-IH-RFQ cavity reaches 178 kΩm,which could meet the requirements of beam dynamics design.
文摘Beam dynamics and RF design have been performed of a new type trapezoidal IH-RFQ operating at 104 MHz for acceleration of 14C+ in the framework of RFQ based 14C AMS facility at Peking University. Low energy spread RFQ beam dynamics design was approached by the method of internal discrete bunching. 14C+ will be accelerated from 40 keV to 500 keV with the length of about 1.1 m. The designed transmission efficiency is better than 95% and the energy spread is as low as 0.6%. Combining the beam dynamics design, a trapezoidal IH-RFQ structure was proposed, which can be cooled more easily and has better mechanical performance than traditional RFQ. Electromagnetic field distribution was simulated by using CST Microwave Studio (MWS). The specific shunt impedance and the quality factor were optimized primarily.
