20世纪气候变暖的归因是当前全球共同关注的焦点之一,而解决这一问题的途径之一是对过去千年的气候变化历史进行精确重建。简要回顾过去千年气候重建的研究进展,重点关注古气候空间重建方法方面的最新进展,并将目前古气候空间重建方法...20世纪气候变暖的归因是当前全球共同关注的焦点之一,而解决这一问题的途径之一是对过去千年的气候变化历史进行精确重建。简要回顾过去千年气候重建的研究进展,重点关注古气候空间重建方法方面的最新进展,并将目前古气候空间重建方法划分为3类,即综合-比例法(Composite Plus Scale,CPS)、气候场重建法(Cli mate Field Reconstruction,CFR)以及状态空间模型(State-space Model)法,同时指出了这些方法的优缺点以及可能的解决途径。展开更多
Influence of thermomechanical treatments （mill annealing, duplex annealing, solution treatment plus aging and triple annealing） on microstructures and mechanical properties of TC4-DT titanium alloy was investigated....Influence of thermomechanical treatments （mill annealing, duplex annealing, solution treatment plus aging and triple annealing） on microstructures and mechanical properties of TC4-DT titanium alloy was investigated. Results showed that thermomechanical treatments had a significant influence on the microstructure parameters and higher annealing and aging temperature and lower cooling rate led to the decrease of the volume fraction of primaryαand the size of prior-βand the increase of the width of grain boundary αand secondary α. The highest strength was obtained by solution treatment and aging due to a large amount of transformedβand finer grain boundaryαand secondaryαat the expense of slight decrease of elongation and the ultimate strength, yield strength, elongation, reduction of area were 1100 MPa, 1030 MPa, 13%and 53%separately. A good combination of strength and ductility has been obtained by duplex annealing with the above values 940 MPa, 887.5 MPa, 15%and 51%respectively. Analysis between microstructure parameters and tensile properties showed that with the volume fraction of transformedβphase and the prior-βgrain size increasing, the ultimate strength, yield strength and reduction of area increased, but the elongation decreased. While the width of grain boundary α and secondary α showed a contrary effect on the tensile properties. Elimination of grain boundaryαas well as small prior-βgrain size can also improve ductility.展开更多
The high-temperature flow behavior of TCll/Ti-22Al-25 Nb electron beam（EB） weldments was investigated by the isothermal compression tests at the temperature of 900-1060℃ and the strain rate of 0.001-10 s-（-1）.Bas...The high-temperature flow behavior of TCll/Ti-22Al-25 Nb electron beam（EB） weldments was investigated by the isothermal compression tests at the temperature of 900-1060℃ and the strain rate of 0.001-10 s-（-1）.Based on the experimental data,the constitutive equation that describes the flow stress as a function of strain rate and deformation temperature is obtained.The apparent activation energy of deformation is calculated,which decreases with increasing the strain and the value is 334 kJ/mol at strain of 0.90.The efficiency of power dissipation η changes obviously with the variation of deformation conditions.Under the strain rates of 0.01,0.1 and 1 s-（-1）,the value of η increases with increasing the true strain for different deformation temperatures.While the value of η decreases with increasing the strain under the strain rates of 0.001 and 10 s-（-1）.The optimum processing condition is（t（opi）=1060℃,ε（opi）=0.1 s-（-1）） with the peak efficiency of 0.51.Under this deformation,dynamic recrystallization（DRX） is observed obviously in the microstructure of welding zone.Under the condition of 1060℃ and 0.001 s-（-1）,the deformation mechanism is dominated by dynamic recovery（DRV） and the value of η decreases sharply（η=0.02）.The flow instability is predicted to occur since the instability parameter ξ（ε）becomes negative.The hot working process can be carried out safely in the domain with the strain rate of 0.001-0.6 s-（-1） and the temperature of 900-1060℃.展开更多
文摘20世纪气候变暖的归因是当前全球共同关注的焦点之一,而解决这一问题的途径之一是对过去千年的气候变化历史进行精确重建。简要回顾过去千年气候重建的研究进展,重点关注古气候空间重建方法方面的最新进展,并将目前古气候空间重建方法划分为3类,即综合-比例法(Composite Plus Scale,CPS)、气候场重建法(Cli mate Field Reconstruction,CFR)以及状态空间模型(State-space Model)法,同时指出了这些方法的优缺点以及可能的解决途径。
基金Project(51101119)supported by the National Natural Science Foundation of China
文摘Influence of thermomechanical treatments （mill annealing, duplex annealing, solution treatment plus aging and triple annealing） on microstructures and mechanical properties of TC4-DT titanium alloy was investigated. Results showed that thermomechanical treatments had a significant influence on the microstructure parameters and higher annealing and aging temperature and lower cooling rate led to the decrease of the volume fraction of primaryαand the size of prior-βand the increase of the width of grain boundary αand secondary α. The highest strength was obtained by solution treatment and aging due to a large amount of transformedβand finer grain boundaryαand secondaryαat the expense of slight decrease of elongation and the ultimate strength, yield strength, elongation, reduction of area were 1100 MPa, 1030 MPa, 13%and 53%separately. A good combination of strength and ductility has been obtained by duplex annealing with the above values 940 MPa, 887.5 MPa, 15%and 51%respectively. Analysis between microstructure parameters and tensile properties showed that with the volume fraction of transformedβphase and the prior-βgrain size increasing, the ultimate strength, yield strength and reduction of area increased, but the elongation decreased. While the width of grain boundary α and secondary α showed a contrary effect on the tensile properties. Elimination of grain boundaryαas well as small prior-βgrain size can also improve ductility.
基金Project(51175431)supported by the National Natural Science Foundation of China
文摘The high-temperature flow behavior of TCll/Ti-22Al-25 Nb electron beam（EB） weldments was investigated by the isothermal compression tests at the temperature of 900-1060℃ and the strain rate of 0.001-10 s-（-1）.Based on the experimental data,the constitutive equation that describes the flow stress as a function of strain rate and deformation temperature is obtained.The apparent activation energy of deformation is calculated,which decreases with increasing the strain and the value is 334 kJ/mol at strain of 0.90.The efficiency of power dissipation η changes obviously with the variation of deformation conditions.Under the strain rates of 0.01,0.1 and 1 s-（-1）,the value of η increases with increasing the true strain for different deformation temperatures.While the value of η decreases with increasing the strain under the strain rates of 0.001 and 10 s-（-1）.The optimum processing condition is（t（opi）=1060℃,ε（opi）=0.1 s-（-1）） with the peak efficiency of 0.51.Under this deformation,dynamic recrystallization（DRX） is observed obviously in the microstructure of welding zone.Under the condition of 1060℃ and 0.001 s-（-1）,the deformation mechanism is dominated by dynamic recovery（DRV） and the value of η decreases sharply（η=0.02）.The flow instability is predicted to occur since the instability parameter ξ（ε）becomes negative.The hot working process can be carried out safely in the domain with the strain rate of 0.001-0.6 s-（-1） and the temperature of 900-1060℃.
