Perovskite-type complex oxides ABO3 （A=Sr, La; B=Mn, Fe, Co） were prepared by citric acid method. The degradation of water-solubilized dyes was carried out using the mixed oxides as photocatalyst. The surface absorb...Perovskite-type complex oxides ABO3 （A=Sr, La; B=Mn, Fe, Co） were prepared by citric acid method. The degradation of water-solubilized dyes was carried out using the mixed oxides as photocatalyst. The surface absorbed oxygen was analyzed using X-ray photoelectron spectroscopy （XPS）. The results indicated that there was a relationship between the photocatalytic activity and the content of the surface absorbed oxygen. The higher the content of the surface absorbed oxygen was, the better the performance of the photocatalyst.展开更多
品管圈（quality control circle,QCC）是品质管理圈的简称,是指由工作性质相同、相近或互补的工作人员组成的小团体,以保证质量为工作中心,开展优质护理服务,对工作中存在的各种问题,全体合作、集思广益,按照一定的活动程序,应用质量...品管圈（quality control circle,QCC）是品质管理圈的简称,是指由工作性质相同、相近或互补的工作人员组成的小团体,以保证质量为工作中心,开展优质护理服务,对工作中存在的各种问题,全体合作、集思广益,按照一定的活动程序,应用质量管理方法进行分析,来解决其中所发生的问题。展开更多
This study is to analyze the influence of the modifier, 5～25 wt % titanium tetrabutoxide (TBO), on the hardness and elastic modulus of the films based on SSO deriving from hydrolytic condensation of (3-glycidoxypropy...This study is to analyze the influence of the modifier, 5～25 wt % titanium tetrabutoxide (TBO), on the hardness and elastic modulus of the films based on SSO deriving from hydrolytic condensation of (3-glycidoxypropyl)trimethoxysilane (GPMS) and vinyltrimethoxysilane (VMS), by the continuous stiffness measurement (CSM) technique of an instrumented-indentation testing (IIT) device. Films were synthesized by adding the stoichiometric amount of ethylenediamine (EDA) and benzoyl proxide (BPO) to SSO solutions in ethanol, dip-coating over glass substrates, and curing using an appropriate thermal cycle. Intrinsic values of hardness and elastic modulus were determined with the average values in “plateau region” from “four-layer” explanation. And the brittle index of the modified coating systems was analyzed.展开更多
Polyhedral oligomeric Silsesquioxanes (POSS) derived from vinyltrimethoxysilane (VMS) and modified with titanium tetrabutoxide (TTBO) (PVT) were prepared by sol-gel process catalyzed by hydrochloric acid (molar ratio:...Polyhedral oligomeric Silsesquioxanes (POSS) derived from vinyltrimethoxysilane (VMS) and modified with titanium tetrabutoxide (TTBO) (PVT) were prepared by sol-gel process catalyzed by hydrochloric acid (molar ratio: [HCl]/Si=0.05), and heating at 45 ℃ during 3 days. The PVT films (f-PVT) with different TTBO content, 5, 20 and 25wt% TTBO, were prepared by adding the stoichiometric amount of benzoyl peroxide (BPO) to PVT solutions in ethanol, dip-coating over glass substrates, and curing using an appropriate thermal cycle and time. The hardness and elastic modulus of f-PVT were tested by continuous stiffness measurement (CSM) of nanoindentation, and the tribological behaviors were comparatively investigated with a nanoscratch test. The influence of the different TTBO contents on the mechanical properties of f-PVT was discussed. The scratch and friction coefficient profiles of f-PVT were illustrated. As the results of the test, f-PVT with 20% TTBO showed the better scratch resistance and tribological behavior.展开更多
Pervoskite-type oxides LaFe_ 1-yCu_yO_3 was prepared by citrate method. Using a fluorescent Hg lamp as irradiator, the degradation experiments of acid red 3B were carried out in the suspension system of LaFe_ 1-yCu_yO...Pervoskite-type oxides LaFe_ 1-yCu_yO_3 was prepared by citrate method. Using a fluorescent Hg lamp as irradiator, the degradation experiments of acid red 3B were carried out in the suspension system of LaFe_ 1-yCu_yO_3. The results show that the doped oxides LaFe_ 1-yCu_yO_3 have good photocatalytic oxidation property. With the study of positron annihilation, its photocatalytic activity is mainly related with defect structures resulted by doping.展开更多
基金the National Natural Science Foundation of China (20671069)
文摘Perovskite-type complex oxides ABO3 （A=Sr, La; B=Mn, Fe, Co） were prepared by citric acid method. The degradation of water-solubilized dyes was carried out using the mixed oxides as photocatalyst. The surface absorbed oxygen was analyzed using X-ray photoelectron spectroscopy （XPS）. The results indicated that there was a relationship between the photocatalytic activity and the content of the surface absorbed oxygen. The higher the content of the surface absorbed oxygen was, the better the performance of the photocatalyst.
文摘This study is to analyze the influence of the modifier, 5～25 wt % titanium tetrabutoxide (TBO), on the hardness and elastic modulus of the films based on SSO deriving from hydrolytic condensation of (3-glycidoxypropyl)trimethoxysilane (GPMS) and vinyltrimethoxysilane (VMS), by the continuous stiffness measurement (CSM) technique of an instrumented-indentation testing (IIT) device. Films were synthesized by adding the stoichiometric amount of ethylenediamine (EDA) and benzoyl proxide (BPO) to SSO solutions in ethanol, dip-coating over glass substrates, and curing using an appropriate thermal cycle. Intrinsic values of hardness and elastic modulus were determined with the average values in “plateau region” from “four-layer” explanation. And the brittle index of the modified coating systems was analyzed.
文摘Polyhedral oligomeric Silsesquioxanes (POSS) derived from vinyltrimethoxysilane (VMS) and modified with titanium tetrabutoxide (TTBO) (PVT) were prepared by sol-gel process catalyzed by hydrochloric acid (molar ratio: [HCl]/Si=0.05), and heating at 45 ℃ during 3 days. The PVT films (f-PVT) with different TTBO content, 5, 20 and 25wt% TTBO, were prepared by adding the stoichiometric amount of benzoyl peroxide (BPO) to PVT solutions in ethanol, dip-coating over glass substrates, and curing using an appropriate thermal cycle and time. The hardness and elastic modulus of f-PVT were tested by continuous stiffness measurement (CSM) of nanoindentation, and the tribological behaviors were comparatively investigated with a nanoscratch test. The influence of the different TTBO contents on the mechanical properties of f-PVT was discussed. The scratch and friction coefficient profiles of f-PVT were illustrated. As the results of the test, f-PVT with 20% TTBO showed the better scratch resistance and tribological behavior.
文摘Pervoskite-type oxides LaFe_ 1-yCu_yO_3 was prepared by citrate method. Using a fluorescent Hg lamp as irradiator, the degradation experiments of acid red 3B were carried out in the suspension system of LaFe_ 1-yCu_yO_3. The results show that the doped oxides LaFe_ 1-yCu_yO_3 have good photocatalytic oxidation property. With the study of positron annihilation, its photocatalytic activity is mainly related with defect structures resulted by doping.
