Ni-W-P coatings were electrodeposited on copper substrates by pulse electroplating.Effects of electrolyte pH(1-3),temperature(40-80°C),average current density(1-7A/dm2)and pulse frequency(200-1000Hz)on deposition...Ni-W-P coatings were electrodeposited on copper substrates by pulse electroplating.Effects of electrolyte pH(1-3),temperature(40-80°C),average current density(1-7A/dm2)and pulse frequency(200-1000Hz)on deposition rate,structure and corrosion resistance performance of Ni-W-P coatings were studied by single factor method.Surface morphology,crystallographic structure and composition of Ni-W-P coatings were investigated by means of scanning electron microscopy,X-ray diffractometry and energy dispersive X-ray spectroscopy,respectively.Corrosion resistance performances of Ni-W-P coatings were studied by potentiodynamic polarization and electrochemical impedance spectroscopy in3.5%NaCl solution(mass fraction)and soil-containing solution.It was found that the pulse electroplated Ni-W-P coatings have superior corrosion resistance performance and the electroplating parameters significantly affect the structure and corrosion resistance performance of Ni-W-P coatings.The optimized parameters of pulse electroplating Ni-W-P coatings were as follows:pH2.0,temperature60°C,average current density4A/dm2,and pulse frequency600Hz.The Ni-W-P coating prepared under the optimized parameters has superior corrosion resistance(276.8kΩ)and compact surface without any noticeable defect.展开更多
A comparative study of amorphous electroless Ni-W-P coatings on mild steel substrate treated by a high power diode laser and furnace annealing was presented.Effects of different laser operating parameters and furnace-...A comparative study of amorphous electroless Ni-W-P coatings on mild steel substrate treated by a high power diode laser and furnace annealing was presented.Effects of different laser operating parameters and furnace-annealing conditions on microstructures,in terms of crystallisation,pores formation and grain growth,were investigated using SEM/EDX and XRD. Corrosion behaviours of these coatings before and after various treatments were evaluated with anodic polarisation in 0.5 mol/L H2SO4 solution.The results show that the furnace-annealing produces either a mixture of nanocrystallined Ni and amorphous phases or precipitated Ni3P phase distributed in nanocrystallined Ni-based matrix,depending on annealing temperatures,whilst the laser treatment under the operating conditions only produces nanocrystallined Ni-based matrix with Ni3P precipitates.Corrosion performance of the coatings treated by both the laser and the furnace-annealing is dependent on the annealing temperature and laser operating conditions.Corrosion mechanisms of various treated-coatings were discussed in the consideration of phase constitutes and proportion,grain sizes of both Ni and Ni3P phases,pores formation and residual stresses.展开更多
Brine resource is rich in China,but its exploitation has been a problem.Hypersaline brine will corrode equipment and materials seriously during the brine exploitation and transportation.The corrosion problem can cause...Brine resource is rich in China,but its exploitation has been a problem.Hypersaline brine will corrode equipment and materials seriously during the brine exploitation and transportation.The corrosion problem can cause great展开更多
Effects of pulse current on properties of electrodeposited RE-Ni-W-P-SiC composite coating were studied. The results show that hardness of the pulse current electrodeposited composite coatings is higher than that of t...Effects of pulse current on properties of electrodeposited RE-Ni-W-P-SiC composite coating were studied. The results show that hardness of the pulse current electrodeposited composite coatings is higher than that of the direct current electrodeposited composite coatings while other parameters are the same. Otherwise, the deposited velocity is higher, and wear resistance and corrosion resistance of the pulse current electrodeposited composite coatings are also improved when the average current density is 10 A/dm2 , pulse frequency is 800 Hz and duty ratio is 1: 5. The hardness of the coating as-deposited is HV500 - 700, and it reaches HV1300 after heat treatment at 400 ℃ for 1 h.展开更多
文摘Ni-W-P coatings were electrodeposited on copper substrates by pulse electroplating.Effects of electrolyte pH(1-3),temperature(40-80°C),average current density(1-7A/dm2)and pulse frequency(200-1000Hz)on deposition rate,structure and corrosion resistance performance of Ni-W-P coatings were studied by single factor method.Surface morphology,crystallographic structure and composition of Ni-W-P coatings were investigated by means of scanning electron microscopy,X-ray diffractometry and energy dispersive X-ray spectroscopy,respectively.Corrosion resistance performances of Ni-W-P coatings were studied by potentiodynamic polarization and electrochemical impedance spectroscopy in3.5%NaCl solution(mass fraction)and soil-containing solution.It was found that the pulse electroplated Ni-W-P coatings have superior corrosion resistance performance and the electroplating parameters significantly affect the structure and corrosion resistance performance of Ni-W-P coatings.The optimized parameters of pulse electroplating Ni-W-P coatings were as follows:pH2.0,temperature60°C,average current density4A/dm2,and pulse frequency600Hz.The Ni-W-P coating prepared under the optimized parameters has superior corrosion resistance(276.8kΩ)and compact surface without any noticeable defect.
基金Project(Y2006F40) supported by the Natural Science Foundation of Shandong Province, ChinaProject(N00003) supported by UK Northwest Science Council through Northwest Laser Engineering Consortium (NWLEC)
文摘A comparative study of amorphous electroless Ni-W-P coatings on mild steel substrate treated by a high power diode laser and furnace annealing was presented.Effects of different laser operating parameters and furnace-annealing conditions on microstructures,in terms of crystallisation,pores formation and grain growth,were investigated using SEM/EDX and XRD. Corrosion behaviours of these coatings before and after various treatments were evaluated with anodic polarisation in 0.5 mol/L H2SO4 solution.The results show that the furnace-annealing produces either a mixture of nanocrystallined Ni and amorphous phases or precipitated Ni3P phase distributed in nanocrystallined Ni-based matrix,depending on annealing temperatures,whilst the laser treatment under the operating conditions only produces nanocrystallined Ni-based matrix with Ni3P precipitates.Corrosion performance of the coatings treated by both the laser and the furnace-annealing is dependent on the annealing temperature and laser operating conditions.Corrosion mechanisms of various treated-coatings were discussed in the consideration of phase constitutes and proportion,grain sizes of both Ni and Ni3P phases,pores formation and residual stresses.
基金Fiancial support for this work by National High-tech Research and Development Projects (863)the key technology of efficient exploiting deep brine in the YellowRiver delta (Contracts 2012AA061705)
文摘Brine resource is rich in China,but its exploitation has been a problem.Hypersaline brine will corrode equipment and materials seriously during the brine exploitation and transportation.The corrosion problem can cause great
文摘Effects of pulse current on properties of electrodeposited RE-Ni-W-P-SiC composite coating were studied. The results show that hardness of the pulse current electrodeposited composite coatings is higher than that of the direct current electrodeposited composite coatings while other parameters are the same. Otherwise, the deposited velocity is higher, and wear resistance and corrosion resistance of the pulse current electrodeposited composite coatings are also improved when the average current density is 10 A/dm2 , pulse frequency is 800 Hz and duty ratio is 1: 5. The hardness of the coating as-deposited is HV500 - 700, and it reaches HV1300 after heat treatment at 400 ℃ for 1 h.
