In general,thermal processes can be classified into two categories: heat-work conversion processes and heat transfer processes. Correspondingly,the optimization of thermal processes has to have two different criteria:...In general,thermal processes can be classified into two categories: heat-work conversion processes and heat transfer processes. Correspondingly,the optimization of thermal processes has to have two different criteria:the well known entropy generation minimization method and the recently proposed entransy dissipation maximization method. This study analyzes the thermal issues in a heat exchanger group,and optimizes the unit arrangements under different constraints based on a suitable optimization crite-rion. The result indicates that the principle of minimum entropy generation rate is valid for optimizing heat exchangers in a ther-modynamic cycle with given boundary temperatures. In contrast,the entransy dissipation maximization is more suitable in heat exchanger optimizations involving only heat transfer processes. Furthermore,the entropy generation rate induced by dumping used streams into ambient surroundings has to be taken into account,except for that originating from the hot and cold-ends of heat exchangers,when using the entropy generation minimization to optimize heat exchangers undergoing a thermodynamic cycle.展开更多
Based on constructal theory and entransy theory,a generalized constructal optimization of a solidification heat transfer process of slab continuous casting for a specified total water flow rate in the secondary coolin...Based on constructal theory and entransy theory,a generalized constructal optimization of a solidification heat transfer process of slab continuous casting for a specified total water flow rate in the secondary cooling zone was carried out.A complex function was taken as the optimization objective to perform the casting.The complex function was composed of the functions of the entransy dissipation and surface temperature gradient of the slab.The optimal water distribution at the sections of the secondary cooling zone were obtained.The effects of the total water flow rate in the secondary cooling zone,casting speed,superheat and water distribution on the generalized constructal optimizations of the secondary cooling process were analyzed.The results show that on comparing the optimization results obtained based on the optimal water distributions of the 8 sections in the secondary cooling zone with those based on the initial ones,the complex function and the functions of the entransy dissipation and surface temperature gradient after optimization decreased by 43.25%,5.90%and 80.60%,respectively.The quality and energy storage of the slab had obviously improved in this case.The complex function,composed of the functions of the entransy dissipation and surface temperature gradient of the slab,was a compromise between the internal and surface temperature gradients of the slab.Essentially,it is also the compromise between energy storage and quality of the slab.The"generalized constructal optimization"based on the minimum complex function can provide an optimal alternative scheme from the point of view of improving energy storage and quality for the parameter design and dynamic operation of the solidification heat transfer process of slab continuous casting.展开更多
Entransy, a recently developed concept, is the central physical quantity characterizing heat transfer processes not related to heat-to-work conversions. The entransy of an object pertains to the nature of the potentia...Entransy, a recently developed concept, is the central physical quantity characterizing heat transfer processes not related to heat-to-work conversions. The entransy of an object pertains to the nature of the potential energy of heat in a thermal field and describes its heat transfer ability. In the present study, we revisit this concept, and develop its relationship to state and process quantities. This then enables a direct comparison to the more familiar concept, entropy, the central physical quantity in thermody- namics. The comparison helps to identify the role entransy has in heat transfer processes and highlight under what conditions state and process quantities related to entransy can be distinguished in such processes. As to embody the entransy loss due to work expended between the system and its environment for the irreversible heat conduction in gases, new quantities, available entransy flow and available system entransy are introduced. Both the entransy of solids and the available system entransy of gases are state quantities and their changes correspond to the entransy flow and the available entransy flow respectively. Thus there is no need to stress the difference between process quantity and state quantity in heat transfer.展开更多
The thermophysical properties,such as thermal conductivity,thermal diffusivity,specific heat capacity and linear thermal expansion of reactive powder concrete(RPC) with different steel fiber volumetric fractions are i...The thermophysical properties,such as thermal conductivity,thermal diffusivity,specific heat capacity and linear thermal expansion of reactive powder concrete(RPC) with different steel fiber volumetric fractions are investigated by means of high temperature tests. The thermophysical characteristics of RPC with different fiber volumes under different temperatures are analyzed and compared with those of the common high-strength concrete and high-performance concrete. The empirical relationships of thermophysical properties with temperature and fiber volume are identified. By the heat transfer and solid physics methods,the microscopic physical mechanism of heat transfer process and heat conduction properties of RPC are investigated,and the theoretical formulas of specific heat capacity and thermal expansion coefficient are derived,respectively. The effects of temperature and steel fibers on the specific heat capacity and the thermal expansion coefficient are quantitatively analyzed and the discriminant conditions are provided. It is shown that the experimental results are consistent with the theoretical prediction.展开更多
基金supported by the National Natural Science Foundation of China (51006060)China Postdoctoral Science Foundation (2009-02080)
文摘In general,thermal processes can be classified into two categories: heat-work conversion processes and heat transfer processes. Correspondingly,the optimization of thermal processes has to have two different criteria:the well known entropy generation minimization method and the recently proposed entransy dissipation maximization method. This study analyzes the thermal issues in a heat exchanger group,and optimizes the unit arrangements under different constraints based on a suitable optimization crite-rion. The result indicates that the principle of minimum entropy generation rate is valid for optimizing heat exchangers in a ther-modynamic cycle with given boundary temperatures. In contrast,the entransy dissipation maximization is more suitable in heat exchanger optimizations involving only heat transfer processes. Furthermore,the entropy generation rate induced by dumping used streams into ambient surroundings has to be taken into account,except for that originating from the hot and cold-ends of heat exchangers,when using the entropy generation minimization to optimize heat exchangers undergoing a thermodynamic cycle.
基金supported by the National Key Basic Research and Devel-opment Program of China("973"Project)(Grant No.2012CB720405)the National Natural Science Foundation of China(Grant Nos.51176203 and 51206184)the Natural Science Foundation of Hubei Province(Grant No.2012FFB06905)
文摘Based on constructal theory and entransy theory,a generalized constructal optimization of a solidification heat transfer process of slab continuous casting for a specified total water flow rate in the secondary cooling zone was carried out.A complex function was taken as the optimization objective to perform the casting.The complex function was composed of the functions of the entransy dissipation and surface temperature gradient of the slab.The optimal water distribution at the sections of the secondary cooling zone were obtained.The effects of the total water flow rate in the secondary cooling zone,casting speed,superheat and water distribution on the generalized constructal optimizations of the secondary cooling process were analyzed.The results show that on comparing the optimization results obtained based on the optimal water distributions of the 8 sections in the secondary cooling zone with those based on the initial ones,the complex function and the functions of the entransy dissipation and surface temperature gradient after optimization decreased by 43.25%,5.90%and 80.60%,respectively.The quality and energy storage of the slab had obviously improved in this case.The complex function,composed of the functions of the entransy dissipation and surface temperature gradient of the slab,was a compromise between the internal and surface temperature gradients of the slab.Essentially,it is also the compromise between energy storage and quality of the slab.The"generalized constructal optimization"based on the minimum complex function can provide an optimal alternative scheme from the point of view of improving energy storage and quality for the parameter design and dynamic operation of the solidification heat transfer process of slab continuous casting.
基金supported by the Tsinghua University Initiative Scientific Research Program
文摘Entransy, a recently developed concept, is the central physical quantity characterizing heat transfer processes not related to heat-to-work conversions. The entransy of an object pertains to the nature of the potential energy of heat in a thermal field and describes its heat transfer ability. In the present study, we revisit this concept, and develop its relationship to state and process quantities. This then enables a direct comparison to the more familiar concept, entropy, the central physical quantity in thermody- namics. The comparison helps to identify the role entransy has in heat transfer processes and highlight under what conditions state and process quantities related to entransy can be distinguished in such processes. As to embody the entransy loss due to work expended between the system and its environment for the irreversible heat conduction in gases, new quantities, available entransy flow and available system entransy are introduced. Both the entransy of solids and the available system entransy of gases are state quantities and their changes correspond to the entransy flow and the available entransy flow respectively. Thus there is no need to stress the difference between process quantity and state quantity in heat transfer.
基金supported by the National Natural Science Foundation of China (Grant No. 50974125)the National Basic Research Program of China ("973" Project) (Grant Nos.2010CB226804,2002CB412705)the Beijing Key Laboratory Projects
文摘The thermophysical properties,such as thermal conductivity,thermal diffusivity,specific heat capacity and linear thermal expansion of reactive powder concrete(RPC) with different steel fiber volumetric fractions are investigated by means of high temperature tests. The thermophysical characteristics of RPC with different fiber volumes under different temperatures are analyzed and compared with those of the common high-strength concrete and high-performance concrete. The empirical relationships of thermophysical properties with temperature and fiber volume are identified. By the heat transfer and solid physics methods,the microscopic physical mechanism of heat transfer process and heat conduction properties of RPC are investigated,and the theoretical formulas of specific heat capacity and thermal expansion coefficient are derived,respectively. The effects of temperature and steel fibers on the specific heat capacity and the thermal expansion coefficient are quantitatively analyzed and the discriminant conditions are provided. It is shown that the experimental results are consistent with the theoretical prediction.
